최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기마이크로전자 및 패키징 학회지 = Journal of the Microelectronics and Packaging Society, v.24 no.3, 2017년, pp.1 - 6
조승범 (서울과학기술대학교 나노IT디자인융합대학원) , 김사라은경 (서울과학기술대학교 나노IT디자인융합대학원)
As the performance and density of IC devices increase, especially the clock frequency increases, power grid network integrity problems become more challenging. To resolve these power integrity problems, the use of passive devices such as resistor, inductor, and capacitor is very important. To manage...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
트랜지스터의 밀도가 높아지고, 작동 속도가 빨라지고, 크기가 작아짐에 따라서 어떤 현상을 야기하는가? | 트랜지스터(transistor)의 밀도가 높아지고, 작동 속도가 빨라지고, 크기가 작아짐에 따라서 전력 네트워크(network)의 총 전류는 증가하고, 전이 시간(transition time)은 짧아지고, 노이즈 범위(noise margin)는 작아지며, 또한 공급 전압(supply voltage)의 감소를 야기한다. 증가한 전류는 오믹(ohmic) 전압 강하(voltage drop)를 발생시키고, 빠른 전이 시간은 유도(inductive) 전압 강하를 발생시킨다. | |
온 칩 디커플링 커패시터의 종류는 무엇들이 있는가? | • Polysilicon-insulator-polysilicon (PIP) decoupling capacitor • Metal-oxide-semiconductor (MOS) decoupling capacitor • Metal-insulator-metal (MIM) decoupling capacitor • Lateral flux decoupling capacitor | |
수동소자들은 전자소자 시스템의 무엇에 중요한 기여를 해왔는가? | 수동소자들은 전자소자 시스템의 소형화에 중요한 기여를 해왔으며, 전자패키징 분야에서 기판(substrate)이나 보드(PCB)의 가격 절감과 소자 성능 향상을 위해서 더욱 활발히 연구되고 있다. 그 중 노이즈(noixe)나 리플(ripple)이 거의 없는 최상의 전력 전달을 위해서는 높은 정전용량(capacitance)과 임피던스(impedance) 발생이 적은 짧은 전류 경로를 가지는 디커플링 커패시터(decoupling capacitor, DECAP)의 개발이 매우 중요한 요소라 하겠다. |
M. Popovich, "High Performance Power Distribution Networks with on-Chip Decoupling Capacitors for Nanoscale Integrated Circuits(in USA.)", in Ph.D. Thesis, Univ. Rochester, NY (2007).
M. Popovich, and E. G. Froed,am, "Decoupling Capacitors for Multi-Voltage Power Distribution Systems", IEEE Trans. VLSI Systems., 14(3), 217 (2006).
S. Ramesh, B. A. Shutzberg, and C. Huang, "Dielectric Nanocomposites for Integral Thin Film Capacitors: Materials Design, Fabrication and Integration Issues", IEEE Trans. Adv. Packag., 26(1), 17 (2003).
T. Lenihan, L. Schaper, and Y. Shi, "Embedded Thin Film Resistors, Capacitors and Inductors in Flexible Polyimide Films", Proc. 46th Electron. Compon. Technol. Conf., 119 (1996).
F. Wang, and Y. Wang, "Development and Utilization of Integral Thin Film Capacitors", Procedia Environ. Sci., 18, 871 (2013).
A. M. Saleem, G. Goransson, and V. Des,aros, "CMOS Compatible on-Chip Decoupling Capacitor Based on Vertically Aligned Carbon Nanofibers", Solid State Electron., 107, 15 (2015).
T. Ando, E. Carther, and P. Jamison, "CMOS Compatible MIM Decoupling Capacitor with Reliable sub-nm EOT High-k Stacks for the 7 nm Node and Beyond", Proc. IEEE Int. Electron Devices Meeting (2016).
G. Carchon, K. Vaesen, and S. Brebets, "Multilayer Thin-Film MCM-D for the Integration of High-Performance RF and Microwave Circuits", IEEE Trans. Compon., Packag., Manuf. Technol., 24(3), 510 (2001).
P. Chahal, R. R. Tummara, and M. G. Allen, "A Novel Integrated Decoupling Capacitor for MCM-L Technology", IEEE Trans. Compon., Packag., Manuf. Technol., Part B., 21(2), 184 (1998).
D. DimosI, S. Llockwood, and R. Schwartz, "Thin-Film Decoupling Capacitors for Multichip Modules", IEEE Trans. Compon., Packag., Manuf. Technol., Part B., 18(1), 174 (1995).
Y. Rao, and C. Wong, "Material Characterization of a highdielectric- constant polymer-ceramic Composite for Embedded Capacitor for RF Applications", J. Appl. Polym. Sci., 92(4), 2228 (2004).
K. Fischer, M. Agostimelli, and C. Allen, "Low-k Interconnect Stack with Multi-Layer Air Gap and Tri-Metal-Insulator- Metal Capacitors for 14nm High Volume Manufacturing", Proc. IEEE Int. Intercon. Technol. Conf., (2015).
K. Kurhara, T. Shioga, and J. D. Banecki, "Electrical Properties of Low-Inductance Barium Strontium Titanate Thin Film Decoupling Capacitors", J. Eur. Ceram. Soc., 24(6), 1873 (2004).
G. Banhegyi, "Comparison of Electrical Mixture Rules for Composites", Colloid. Polym. Sci., 264(12), 1030 (1986).
B. Lestriez, A. Maazouz, and J. Gerard, "Is the Maxwell-Sillars- Wagner Model Reliable for Describing the Dielectric Properties of a core-shell particle-epoxy System?", Polymer., 39(26), 6733 (1998).
J. Xu, and C. Wong, "Characterization and Properties of an organic-inorganic Dielectric Nanocomposite for Embedded Decoupling Capacitor Applications", Composites, Part A., 38(1), 13 (2007).
P. Zhou, K. Sridharan, and S. S. Sapatnekar, "Optimizing Decoupling Capacitors in 3D Circuits for Power Grid Integrity", IEEE Design & Test of Computers., 26(5), 15 (2009).
M. Kang, K. Cho, and S. Nahm, "Effects of Vanadium Substitution on the Electrical Performance of Amorphous $SrBi_2$ - $Ta_2O_9$ Thin-Film Capacitors", Scr. Mater., 7745 (2014).
T. Bertaud, C. Bermond, and S. Blonkowski, "Electrical Characterization of Advanced MIM Capacitors with $ZrO_2$ Insulator for High-Density Packaging and RF Applications", IEEE Trans. Compon., Packag., Manuf. Technol., 2(3), 502 (2012).
S. Cimno, A. Padovani, and L. Larcher, "A Study of the Leakage Current in TiN/ $HfO_2$ /TiN Capacitors", Microelectron. Eng., 95, 71.(2012).
J. H. Han, S. Han, and W. Lee, "Improvement in the Leakage Current Characteristic of Metal-Insulator-Metal Capacitor by Adopting RuO2 Film as Bottom Electrode", Appl. Phys. Lett., 99(2), 022901 (2011).
B. Ma, D. Kwon and M. Narayanan, "Dielectric Properties of PLZT Film-on-Foil Capacitors", Mater Lett., 62(20), 3573 (2008).
J. Choi, C. Choi, and K. Cho, "Effect of Oxygen Vacancy and Mn-Doping on Electrical Properties of $$ Thin Film Grown by Pulsed Laser Deposition", Acta Mater., 57(8), 2454 (2009).
X. Zhu, E. Defay, and Y. Lee, "High Permittivity $Bi_{24}Fe_2O_{39}$ Thin Films Prepared by a Low Temperature Process", Appl. Phys. Lett., 97(23), 232903 (2010).
J. Wang, J. Lu, and Y. Li, "Placement of Decoupling Capacitor on Packages Based on Effective Decoupling Radius", 18th IEEE Electron. Packag. Technol. Conf. (2016).
J. Y. Choi, and M. Swaminathan, "Decoupling Capacitor Placement in Power Delivery Networks using MFEM", IEEE Trans. Compon., Packag., Manuf. Technol., 1(10), 1651 (2011).
M. Popovich, and E. G. Fredman, "Impedance Characteristics of Decoupling Capacitors in Multi-Power Distribution Systems", Proc. 11th IEEE Int. Conf. Electronics, Circuits Systems., (2004).
X. Zhao, M. R. Scheuermann, and S. K. Lim, "Analysis and Modeling of DC Current Crowding for TSV-Based 3-D Connections and Power Integrity", IEEE Trans. Compon., Packag., Manuf. Technol., 4(1), 123.(2014).
Y. C. Tan, C. M. Tan, X. W. Zhang, T. C. Chai, and D. Q. Yu, "Electromigration performance of through silicon via (TSV), a modeling approach", Microelectron. Rel., 50(9-11), 1336 (2010).
L. H. Allen, and M. Y. Zhang, "Solutions to current crowding in circular vias for contact resistance measurements", J. Appl. Phys., 70(1), 253 (1991).
M. B. Healy, and S. K. Lim, "Distributed TSV topology for 3-D powersupply networks", IEEE Trans. Very Large Scale Integr. Syst., 20(11), 2066 (2012).
K. Oh, J. Ma, and S. Kim, "Interconnect Process Technology for High Power Delivery and Distribution", J. Microelectron. Packag. Soc., 19(3), 9 (2012).
G. Schrom, P. Hazucha, and J. Hahn, "Feasibility of Monolithic and 3D-Stacked DC-DC Converters for Microprocessors in 90 nm Technology Generation", Proc. Int. Symp. Low Power Electron. Design., 263 (2004).
J. Sun, J. Lu, and D. Giuliano, "3D Power Delivery for Microprocessors and High-Performance ASICs", Appl. Power Electron. Conf., 127 (2007).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.