초록

용어보기논문에서 용어와 풀이말을 자동 추출한 결과로, 시범 서비스 중입니다. AI-Helper

Abstract ▼ AI-Helper

This paper describes the conceptual design of a customized gripper for the assembly process of IT products, which has a relatively short and regular product replacement cycle. The grippers that are used in the manufacturing field are mostly composed of one to two degrees of freedom and they can only...

This paper describes the conceptual design of a customized gripper for the assembly process of IT products, which has a relatively short and regular product replacement cycle. The grippers that are used in the manufacturing field are mostly composed of one to two degrees of freedom and they can only handle one object, not multiple ones. Cost is also an important factor. If it were possible to develop a gripper suitable for the assembly process quickly and easily, some of the difficulties involved in its automation caused by the frequent changes of product and process could be solved. The assembly process utilized for this research is defined and described as the procedure and method of the process analysis due to the confidentiality of the manufacturer. We used an axiomatic design to derive the functional requirements and design parameters of the gripper used for the tablet PC assembly process. We proposed a design method for the conceptual design of the gripper by determining these parameters. For the feasibility study, a specific process was selected and the progress of the gripper design was described as an example. Although there have been studies on the design guidelines for grippers, their considerations are too general and their degree of freedom is too high. This paper defines the function of the gripper based on the assembly process of the IT products, which allows their production to be streamlined and automated. In this research, we attempted to produce a design that reflects the assembly process, not just one that enables objects to be held.

주제어