최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기멤브레인 = Membrane Journal, v.28 no.2, 2018년, pp.105 - 112
이슬기 (상명대학교 화학과) , 홍세령 (상명대학교 계당교양교육원)
In this study, PTMSP-GO composite membranes were prepared by the addition of GO (graphene oxide) into PTMSP [poly (1-trimethylsilyl-1-propyne)] having high gas permeability, to study of gaseous membrane using GO. Gas permeation properties for
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
최근 ‘mixed matrix membrane’(MMM)의 충진물로 사용되는 물질은 무엇인가? | 일반적으로 고분자에 silica, zeolite, clay 등과 같은 무기물질이 충진물로 사용되어 물리적 개질하여 고분자막의 성능을 향상시키는 연구가 진행되고 있다[7-9]. 최근에는 카본을 기초로 한 CNT (carbon nanotube), graphene, GO (graphene oxide)가 기계적 강도, 내화학성 등의 성질을 가지고 있어 고분자의 충진물 소재로 이용되고 있다[10,11]. | |
기체분리 공정의 장점은 무엇인가? | 지난 수십 년 동안 기체 분리막을 이용하여 화석연료의 연소로 발생하는 배기가스에서 이산화탄소를 분리하거나 천연가스로부터 수소를 분리하는 등의 산업계와 환경문제를 해결하는 연구가 활발히 진행되고 있다[1-3]. 막을 통해 이루어지는 기체분리 공정은 에너지 사용이 적고, 제작이 간단하며 소자본으로도 운용할 수 있는 장점을 가지고 있다. 그러나 고분자 기체 분리막은 일반적으로 trade-off 현상의 한계를 지니고 있어 이 문제를 개선하기 위해서 ‘mixed matrix membrane’(MMM)가 사용되는데, 이것은 고분자막에 무기물질 또는 유기-무기 물질 등을 첨가하여 개질하는 방법이다[4-6]. | |
‘mixed matrix membrane’(MMM)란 무엇인가? | 막을 통해 이루어지는 기체분리 공정은 에너지 사용이 적고, 제작이 간단하며 소자본으로도 운용할 수 있는 장점을 가지고 있다. 그러나 고분자 기체 분리막은 일반적으로 trade-off 현상의 한계를 지니고 있어 이 문제를 개선하기 위해서 ‘mixed matrix membrane’(MMM)가 사용되는데, 이것은 고분자막에 무기물질 또는 유기-무기 물질 등을 첨가하여 개질하는 방법이다[4-6]. 일반적으로 고분자에 silica, zeolite, clay 등과 같은 무기물질이 충진물로 사용되어 물리적 개질하여 고분자막의 성능을 향상시키는 연구가 진행되고 있다[7-9]. |
J. Ma, D. Ping, and X. Dong, "Recent developments of graphene oxide-based membranes: A review", Membranes, 7, 52 (2017).
S. R. Reijerkerk, R. Jordana, K. Nijmeijer, and M. Wessling, "Highly hydrophilic, rubbery membranes for $CO_2$ capture and dehydration of flue gas", Int. J. Greenh. Gas. Con., 5, 26 (2011).
H. Sijbesma, K. Nymeijer, R. V. Marwijk, R. Heijboer, J. Potreck, and M. Wessling, "Flue gas dehydration using polymer membranes", J. Membr. Sci., 313, 263 (2008).
D. Q. Vu, W. J. Koros, and S. J. Miller, "Mixed matrix membranes using carbon molecular sieves. I. Preparation and experimental results", J. Membr. Sci., 211, 311 (2003).
T. Li, Y. Pan, K. V. Peinemann, and Z. Lai, "Carbon dioxide selective mixed matrix composite membrane containing ZIF-7 nano-fillers", J. Membr. Sci., 425-426, 235 (2013).
R. D. Noble, "Perspectives on mixed matrix membranes", J. Membr. Sci., 378, 393 (2011).
Y. Shen and A. C. Lua, "Preparation and characterization of mixed matrix membranes based on PVDF and three inorganic filler (fumed nonporous silica, zeolite 4A and mesoporous MCM-41) for gas separation", Chem. Eng. J., 192, 201 (2012).
R. S. Murali, A. F. Ismail, M. A. Rahman, and S. Sridhar, "Mixed matrix membranes of pebax-1657 loaded with 4A zeolite for gaseous separations", Sep. Purif. Technol., 129, 1 (2014).
J. S. Park, J. W. Rhim, B. G. Park, S. H. Kong, and S. Y. Nam, "Preparation and gas barrier properties of chitosan/clay nanocomposite film", Membr. J., 15, 247 (2005).
L. Ge, Z. Zhu, and V. Rudolph, "Enhanced gas permeability by fabricating functionalized multi-walled carbon nanotubes and polyethersulfone nanocomposite membrane", Sep. Purif. Technol., 78, 76 (2011).
F. H. Akhtar, M. Kumar, and K. V. Peinemann, "Pebax 1657/graphene oxide composite membranes for improved water vapor separation", J. Membr. Sci., 525, 187 (2017).
Y. Cui, S. I. Kundalwal, and S. Kumar, "Gas barrier performance of graphene/polymer nanocomposites", Carbon, 98, 313 (2016).
G. Shi, Q. Meng, Z. Zhao, H. C. Kuan, A. Michelmore, and J. Ma, "Facile fabrication of graphene membranes with readily tunable structures", Appl. Mater. Inter., 7, 13745 (2015).
K. K. Sadasivuni, D. Ponnamma, S. Thomas, and Y. Grohens, "Evolution from graphite to graphene elastomer composites", Prog. Polym. Sci., 39, 749 (2014).
A. Achari and M. Eswaramoorthy, "Casting molecular channels through domain formation: high performance graphene oxide membranes for $H_2/CO_2$ separation", J. Mater. Chem. A., 4, 7560 (2016).
H. W. Kim, H. W. Yoon, S. M. Yoon, B. M. Yoo, B. K. Ahn, Y. H. Cho, H. J. Shin, H. Yang, U. Paik, S. Kwon, J. Y. Choi, and H. B. Park, "Selective gas transport through few-layered graphen and graphene oxide membranes", Science, 342, 91 (2013).
S. Morimune, T. Nishino, and T. Goto, "Ecological approach to graphene oxide reinforced poly (methyl methacrylate) nanocomposites", ACS Appl. Mater. Interfaces, 4, 3596 (2012).
G. Srinivas, J. W. Ford, and T. Yildirim, "Porous graphene oxide frameworks: synthesis and gas sorption properties", J. Mater. Chem., 21, 11323 (2011).
H. D. Huang, P. G. Ren, J. Chen, W. Q. Zhang, X. Ji, and Z. M. Li, "High barrier graphene oxide nanosheet/poly(vinyl alcohol) nanocomposite films", J. Membr. Sci., 409-410, 156 (2012).
T. C. Merkel, V. I. Bondar, K. Nagai, and B. D. Freeman, "Sorption and transport of hydrocarbon and perfluorocarbon gases in poly(1-trimethylsilyl-1-propyne)", J. Polym. Sci. Pol. Phy., 38, 273 (2000).
D. R. Paul, "Creating new types of carbon-based membranes", Science, 335, 413 (2012).
D. Zhao, J. Ren, Y. Qiu, H. Li, K. Hua, X. Li, and M. Deng, "Effect of graphene oxide on the behavior of poly(amide-6-b-ethylene oxide)/graphen oxide mixed-matrix membrane in the permeation process", J. Appl. Polym. Sci., 132, 42624 (2015).
K. D. Sitter, P. Winberg, J. D'Haen, C. Dotremont, R. Leysen, J. A. Martens, S. Mullens, F. H. J. Maurer, and I. F. J. Vankelecom, "Silica filled poly(1-trimethylsily-1-propyne) nanocomposite membranes: Relation between the transport of gases and structural characteristics", J. Membr. Sci., 278, 83 (2006).
J. Shen, "Size effects of graphene oxide on mixed matrix membranes for $CO_2$ separation", AIChE J., 62, 2843 (2016).
L. M. Robeson, "The upper bound revisited", J. Membr. Sci., 320, 390 (2008).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.