최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.17 no.3, 2018년, pp.28 - 33
한문식 (계명대학교 기계자동차공학과) , 조재웅 (공주대학교 기계자동차공학부)
The automotive front bumper guard is the most important part of the vehicle for protecting the life of driver when a traffic accident happens. In order to ensure safe driving, this part must possess sufficient strength and durability. This study was carried out with structural and fatigue analyses b...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ku, H. K., Kim, J. W., Won, C. and Song, J. I., "Optimization and Structure Analysis of Brake Disc for Free-fall Winch," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 55-61, 2012.
Cho, J. U. and Han, M. S., "Structural Analysis on Door Hinge of Car," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 2, pp. 33-39, 2010.
Choi, D. S., "Structural Analysis and Design of Small Wind Turbine Blade," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 85-91, 2015.
Jang, S. C., "Flow and Structural Analysis at Welding Fume of Automatic Gantry Robot : CFD/CAE and Automatic Convergence Study," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 6, pp. 158-163, 2012.
Kang, H. J., Kim, B. H., Kim, B. H. and Seo, J. H., "Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016.
Ha, J. S. and Lee, G. M., "A Study on Structure and Vibration Analysis of an Air Suspension Seat," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 47-54, 2017.
Park, Y. C., Park, H. S. and Kim, S. P., "Analysis method on Structural Safety Evaluation of Butterfly Valve of Piping for LNG carrier," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 7, No. 4, pp. 76-81, 2008.
Park, S. J., Lee, C. M., Kim, W. and Byun, S. S., "A Study on Structural Analysis of Intergrated Machining Center," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 1, pp. 49-54, 2010.
Cho, S. J., Han, J. W., Park, Y. J. and Lee, G. H., "Structural analysis of a planetary gear carrier in the slewing reducer for tower crane," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5, pp. 1-7, 2014.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.