최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기마이크로전자 및 패키징 학회지 = Journal of the Microelectronics and Packaging Society, v.25 no.2, 2018년, pp.9 - 17
정도현 (서울시립대학교 신소재공학과) , 정재필 (서울시립대학교 신소재공학과)
Aluminum (Al) and its alloys have been used widely in a variety of industries such as structural, electronic, aerospace, and particularly automotive industries due to their lightweight characteristic, outstanding ductility, formability, high oxidation and corrosion resistance, and high thermal and e...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
알루미늄의 특징은? | 전자기기의 프레임 및 자동차 차체 등에 사용되는 알루미늄(Al)은 전성과 연성이 우수하고 표면에 형성되는 부동태 층으로 인해 내식성이 뛰어나며 열전도도 및 전기전도도가 높아 전자 소재를 비롯하여 자동차, 우주항공 분야 등의 다양한 분야에서 사용되고 있다.1) 또한, 알루미늄은 철강재료 대비 1/3 가벼운 장점으로 인해 자동차 산업에서 차체 경량화 및 연비 향상을 위한 목적으로도 현재 활발히 연구되고 있다.2) 즉, 알루미늄은 전자기기의 프레임 및 차량의 경량화를 가능하게 하여 에너지 절감에 크게 기여하고 있으며, 전기자동차가 보편화되면서 더욱 많은 알루미늄이 자동차 분야에 적용될 것으로 예상된다. | |
알루미늄은 어떤 원소와 합금되는가? | 일반적으로 알루미늄은 높은 연성으로 인해 구리(Cu), 실리콘(Si), 망간(Mn), 마그네슘(Mn), 아연(Zn) 등과 합금하여 강도 향상 등의 특성을 얻는다.7-8) 알루미늄 합금은 첨가 원소에 따라 1000계열에서 7000계열로 분류되며, 그밖에도 8000 및 9000 계열이 존재한다. | |
아크 용접법의 특징은? | 피용접재 금속과 전극 사이에 발생한 아크 열로 금속을 가열하여 용융 접합시키는 방법으로, TIG 용접은 전극으로 텅스텐을 사용하여 Ar, He 등의 불활성 가스를 분사하면서 용접한다. 이 방법은 금속 산화물의 발생이나불순물의 혼입이 적으며, 2 mm 이하 강판의 알루미늄, 스테인리스강의 용접에 적합하다. 아크 및 용융지가 불활성 가스 분위기에 의해 보호되어서 아크의 안정성, 등의 특성이 우수하다. Lin 등은 TIG 용접법을 이용하여 아연 도금강판과 알루미늄 합금의 이종소재 접합을 Fig. |
P. Ebrahimzad, M. Ghasempar, and M. Balali, "Friction stir processing of aerospace aluminum alloy by addition of carbon nano tube", Trans. Indian. Inst. Met., 70(9), 2241 (2017).
J. H. Park, K. J. Kim, J. W. Lee, and J. K. Yoon, "Light-weightdesign of automotive suspension link based on design of experiment", Int. J. Auto. Technol., 16(1), 67 (2015).
H. T. Kim and S. C. Kil, "High efficient welding technology of the car bodies", J. Weld. Join., 34(4), 62 (2016).
S. M. Emami, M. Divandari, H. Arabi, and E. Hajjari, "Effect of melt-to-solid insert volume ratio on Mg/Al dissimilar metals bonding", J. Mater. Eng. Perf., 22(1), 123 (2013).
Z. Zhu, K. Y. Lee, and X. Wang, "Ultrasonic welding of dissimilar metals, AA6061", Int. J. Adv. Manuf. Technol., 59(5), 569 (2012).
A. Sharma, Y. S. Shin, and J. P. Jung, "Influence of various additional elements in Al based filler alloys for automotive and brazing industry", J. Weld. Join., 33(5), 1 (2015).
A. Sharma and J. P. Jung, "Aluminium based brazing fillers for high temperature electronic packaging applications", J. Microelectron. Packag. Soc., 22(4), 1 (2015).
D. Y. Su, H. J. Jin, and S. J. Wu, "Microstructure and mechanical properties of 2219 aluminum alloy VPTIG welds during cyclic thermal treatment", Rare Metals, (2015).
L. Q. Niu, X. Y. Li, L. Zhang, X. B. Liang, and M. Li, "Correlation between microstructure and mechanical properties of 2219-T8 aluminum alloy joints by VPTIG welding", Acta Metall. Sin. (Engl. Lett.), 30(5), 438 (2017).
J. P. Martins, A. L. M. Carvalho, and A. F. Padilha, "Microstructure and texture assessment of Al-Mn-Fe-Si (3003) aluminum alloy produced by continuous and semicontinuouscasting processes", J. Mater. Sci., 44(11), 2966 (2009).
M. Gunyuz, H. Mollaoglu, and A. Ulus, "Improvement of corrosion resistance in modified 3003 aluminum alloys produced by twin roll casting under different casting parameters", Light Metals, 1255 (2015).
A. Sharma, M. H. Roh, D. H. Jung, and J. P. Jung, "Effect of $ZrO_{2}$ nanoparticles on the microstructure of Al-Si-Cu filler for low-temperature Al brazing applications", Metall. Mater. Trans. A., 47(1), 510 (2016).
E. Guo, G. Cao, Y. Feng, L. Wang, G. Wang, and X. Lv, "Modification of Sr on 4004 aluminum alloy", JOM, 65(5), 613 (2013).
S. Niu, S. Chen, H. Dong, D. Zhao, X. Zhang, X. Guo, and G. Wang, "Microstructure and properties of lap joint between aluminum alloy and galvanized steel by CMT", J. Mater. Eng. Perf., 25(5), 1839 (2016).
S. Shanavas, J. E. Raja, and N. Murugan, "Weldability of marine grade AA 5052 aluminum alloy by underwater friction stir welding", Int. J. Adv. Manuf. Technol., 95(9), 4535 (2018).
J. Shim, B. Kang, and I. Kim, "Characteristics of 5052 aluminum alloy sheets joint using electromagnetic force", J. Mecha. Sci. Technol., 31(7), 3437 (2017).
S. P. Chen, K. M. Mussert, and S. V. Zwaag, "Precipitation kinetics in Al6061 and in an Al6061-alumina particle composite", J. Mater. Sci., 33(18), 4477 (1998).
A. K. Mishra, and R. K. Srivastava, "Wear behaviour of Al-6061/SiC metal matrix composites", J. Inst. Eng. India Ser. C, 98(2), 97 (2017).
B. Xing, X. He, K. Zeng, and Y. Wang, "Mechanical properties of self-piercing riveted joints in aluminum alloy 5052", Int. J. Adv. Manuf. Technol., 75(1), 351 (2014).
F. Ding and H. Yong, "Study on activating TIG welding for aluminium alloys", Weld. World., 49(1), 22 (2005).
Z. Lu, P. Huang, W. Gao, Y. Li, H. Zhang, and S. Yin, "ARC welding method for bonding steel with aluminum", Front. Mech. Eng. China., 4(2), 134 (2009).
S. Lin, J. Song, G. Ma, and C. Yang, "Dissimilar metals TIG welding-brazing of aluminum alloy to galvanized steel", Front. Mater. Sci. China., 3(1), 78 (2009).
I. Sevim, F. Hayat, Y. Kaya, N. Kahraman, and S. Sahin, "The study of MIG weldability of heat-treated aluminum alloys", Int. J. Adv. Manuf. Technol., 66(9), 1825 (2013).
G. Turichin, E. Valdaytseva, and I. Tzibulsky, "Simulation and technology of hybrid welding of thick steel parts with high power fiber laser", Phys. Procedia., 12(A), 646 (2011).
D. Sakurada, K. Katoh, and H. Tokisue, "Underwater friction welding of 6061 aluminum alloy", J. Jpn. Inst. Light Met., 51(1), 2 (2002).
S. Sabari, S. Malarvizhi, V. Balasubramanian, and G. Reddy, "Experimental and numerical investigation on under-water friction stir welding of armour grade AA2519-T87 aluminium alloy", Deff. Technol., 12(4), 324 (2016).
A. Iniesta, D. Mendoza, J. Romero, and L. Gonzalez, "Multi-objective optimization of an aluminum torch brazing process by means of genetic programming and R-NSGA-II", Int. J. Adv. Manuf. Technol., 91(9), 4117 (2017).
D. Wei, X. Bai, L. Yuan, L. Bin, and W. Qing, "Torch brazing 3003 aluminum alloy with Zn-Al filler metal", Trans. Non-ferrous Met. Soc. China., 22(1), 30 (2012).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.