최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.35 no.8, 2018년, pp.803 - 807
박태림 (연세대학교 대학원 기계공학과) , 양영모 (연세대학교 기계공학부) , 신동갑 (연세대학교 대학원 기계공학과) , 김대은 (연세대학교 대학원 기계공학과)
In this study, the mechanical and frictional properties of Polydimethylsiloxane (PDMS) were investigated. PDMS has received much attention because of its numerous advantages such as good formability, high transparency, light weight and low cost. However, PDMS has relatively poor mechanical propertie...
Kudo, Hiroyuki, Sawada, Takanori, Kazawa, Elito, Yoshida, Hiromichi, Iwasaki, Yasuhiko, Mitsubayashi, Kohji. A flexible and wearable glucose sensor based on functional polymers with Soft-MEMS techniques. Biosensors & bioelectronics, vol.22, no.4, 558-562.
Choi, M.C., Kim, Y., Ha, C.S.. Polymers for flexible displays: From material selection to device applications. Progress in polymer science, vol.33, no.6, 581-630.
Wang, Do-Young, Kim, Chang-Lae, Kim, Dae-Eun. Development of flexible polymer sheet with high surface durability using discretely embedded micro-balls. CIRP annals ... manufacturing technology, vol.66, no.1, 527-530.
Jo, B.-H., Van Lerberghe, L.M., Motsegood, K.M., Beebe, D.J.. Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer. Journal of microelectromechanical systems : a joint IEEE and ASME publication on microstructures, microactuators, microsensors, and microsystems, vol.9, no.1, 76-81.
Dresselhuis, D.M., de Hoog, E.H.A., Cohen Stuart, M.A., van Aken, G.A.. Application of oral tissue in tribological measurements in an emulsion perception context. Food hydrocolloids, vol.22, no.2, 323-335.
Macakova, Lubica, Yakubov, Gleb E., Plunkett, Mark A., Stokes, Jason R.. Influence of ionic strength on the tribological properties of pre-adsorbed salivary films. Tribology international, vol.44, no.9, 956-962.
Ryu, B.H., Kim, D.E.. Development of highly durable and low friction micro-structured PDMS coating based on bio-inspired surface design. CIRP annals ... manufacturing technology, vol.64, no.1, 519-522.
He, Bo, Chen, Wei, Jane Wang, Q.. Surface Texture Effect on Friction of a Microtextured Poly(dimethylsiloxane) (PDMS). Tribology letters, vol.31, no.3, 187-197.
Huang, Wei, Jiang, Liang, Zhou, Chuanxi, Wang, Xiaolei. The lubricant retaining effect of micro-dimples on the sliding surface of PDMS. Tribology international, vol.52, 87-93.
Li, Jinfeng, Zhou, Fei, Wang, Xiaolei. Modify the friction between steel ball and PDMS disk under water lubrication by surface texturing. Meccanica, vol.46, no.3, 499-507.
Manicone, P.F., Rossi Iommetti, P., Raffaelli, L.. An overview of zirconia ceramics: Basic properties and clinical applications. Journal of dentistry, vol.35, no.11, 819-826.
Smuk, B, Szutkowska, M, Walter, J. Alumina ceramics with partially stabilized zirconia for cutting tools. Journal of materials processing technology, vol.133, no.1, 195-198.
Penkov, Oleksiy V., Khadem, Mahdi, Nieto, Andy, Kim, Tae-Hyeong, Kim, Dae-Eun. Design and Construction of a Micro-Tribotester for Precise In-Situ Wear Measurements. Micromachines, vol.8, no.4, 103-.
McKee, Clayton T., Last, Julie A., Russell, Paul, Murphy, Christopher J.. Indentation Versus Tensile Measurements of Young's Modulus for Soft Biological Tissues. Tissue engineering. Part B, Reviews, vol.17, no.3, 155-164.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.