다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
한국자동차공학회논문집 = Transactions of the Korean Society of Automotive Engineers, v.26 no.4, 2018년, pp.433 - 439
이정규 (르노삼성자동차 R&D본부) , 유재문 (르노삼성자동차 R&D본부) , 이경욱 (르노삼성자동차 R&D본부) , 김형갑 (영화금속 개발팀)
AI-Helper
In this study, a major cause of judder, disk thickness variation(DTV), was investigated by examining the correlation between graphite distribution and the wear properties of gray, cast-iron brake disks. To test the manufacturing methods, gray, cast-iron brake disks were manufactured in a commercial ...
M. K. Abdelhamid, "Brake Judder Analysis: Case Studies," SAE 972027, 1997.
W. Stringham, P. Jank, J. Pfeifer and A. Wang, "Brake Roughness - Disk Brake Torque Variation, Rotor Distortion and Vehicle Response," SAE 930803, 1993.
K. Doi, T. Mibe, H. Matsui, T. Tamasho and H. Nakanishi, "Brake Judder Reduction Technologybrake Design Technique Including Friction Material Formulation," JSAE Review, Vol.21, Issue 4, pp.497-502, 2000.
J. D. Rainbolt, "Effects of Disk Material Selection on Disk Brake Rotor Configuration," SAE 750733, 1975.
M. A. Maleque, S. Dyuti and M. M. Rahman, "Material Selection Method in Design of Automotive Brake Disc," Proceedings of World Congress on Engineering, Vol.III, pp.2322-2326, 2010.
J. Y. Lee, "The Effects of the Composition and Microstructure of Brake Disc on Preferential Wear," KSAE Fall Conference Proceedings, pp.1402-1409, 2004.
M. Collignon, G. Regheere, A. L. Cristol, Y. Desplanques and D. Balloy, "Braking Performance and Influence of Microstructure of Advanced Cast Irons for Heay Goods Vehicle Brake Discs," Journal of Engineering Tribology, Vol.227, No.8, pp.930-940, 2013.
J. Coyle, P. Tsang and T. Johnson, "The Effect of Rotor Metallurgy on Brake Performance and Wear Resistance," SAE 830533, 1983.
J. O. Agunsoye, S. A. Bello, S. B. Hassan, R. G. Adeyemo and J. M. Odii, "The Effect of Copper Addition on the Mechanical and Wear Properties of Grey Cast Iron," Journal of Minerals and Materials Characterization and Engineering, Vol.2, No.5, pp.470-483, 2014.
Y. T. Kim, Y. P. Kim and N. Y. Ryu, "Study for Relation between Brake Disc Cast Iron Chemical Composition Cu, S Content and Friction Value at Same Absolute Humidity Condition," Transactions of KSAE, Vol.25, No.5, pp.623-631, 2017.
International Standard ISO 945-1, 2008.
J. K. Lee, K. G. Lee, J. M. You and H. G. Kim, "Study on Wear Property and Microstructure of Brake Disk by Manufacturing Methods," KSAE Fall Conference Proceedings, pp.1176-1182, 2017.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.