$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

System Level ESD Analysis - A Comprehensive Review II on ESD Coupling Analysis Techniques 원문보기

Journal of electrical engineering & technology, v.13 no.5, 2018년, pp.2033 - 2044  

Yousaf, Jawad (Department of Electrical and Computer Engineering, Sungkyunkwan University) ,  Lee, Hosang (Department of Electrical and Computer Engineering, Sungkyunkwan University) ,  Nah, Wansoo (Department of Electrical and Computer Engineering, Sungkyunkwan University)

Abstract ▼ AI-Helper 아이콘AI-Helper

This study presents states-of-the art overview of the system level electrostatic discharge (ESD) analysis and testing. After brief description of ESD compliance standards and ESD coupling mechanisms, the study provides an in-depth review and comparison of the various techniques for the system level ...

주제어

#Electrostatic Discharge (ESD)   #System level ESD testing   #IEC 61000-4-2   #ESD coupling   #ESD generator   #ESD source modeling   #Circuit modeling   #3D modeling   #S-Parameters   #Frequency domain   #Hybrid simulation   #ESD measurements  

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • [19] modeled a simplified prototype motherboard of mobile device and a simple ESD gun model using high frequency structure simulator (HFSS) to estimate the power ground noise voltage at the EUT point. In [21], the authors analyzed the soft- failure analysis of a two-way radio set by doing the ESD simulation in CST using simple Dito model and detailed numerical modeling of the radioset.
  • [32] used the hybrid technique by combining the circuit and full wave EM simulation to simulate an ESD event in contact discharge mode using an FDTD solver. The authors obtained the ESD current from a circuit simulator, calculated the electrostatic field for initial field distribution, and then performed the full wave FDTD based simulation to estimate the discharge current and the surrounding electric and magnetic fields of generators. In [18], the authors first calculated the field generated by the full wave simulation of the ESD gun only using the gun model of [62].
  • In this study, an in-depth review of system level ESD testing is presented. The study covers the basics of ESD compliance standards (component vs. system level ESD standards); ESD coupling mechanisms; and a detailed review of analytical, circuit, and full wave modeling of ESD generators and system level ESD coupling analysis techniques, including time domain analysis, frequency domain analysis, full wave numerical simulation, and hybrid simulation approaches. Last, an overview of the suggestions for improving system level ESD qualification testing is presented.
  • The uniqueness of this study lies in extensive and comprehensive review of the qualification standards of ESD, ESD coupling mechanisms, and methods being used for the system level ESD testing and analysis. Each topic has been reviewed thoroughly based on available literature and is presented and described in an attractive manner.
  • This study is unique because it provides a comprehensive review of and basic knowledge about system level ESD testing in very attractive manner with and a detailed comparison of numerous reported techniques.

이론/모형

  • The induced voltage at the termination resistors of a transmission line was analyzed by [23] using the developed EM model of a NoiseKen generator. A study involving the measurement of ESD disturbance on a coaxial cable was carried out by [10] using the simple proposed Dito generator model. Caniggia et al.
  • [22] analyzed the induced voltage inside a small cavity with a slot, on a simplified mobile phone like device and on the mouse cable (transmission line) near the horizontal coupling plane (HCP) and vertical coupling plane (VCP) for the direct discharge using the developed simplified model. The induced voltage at the termination resistors of a transmission line was analyzed by [23] using the developed EM model of a NoiseKen generator. A study involving the measurement of ESD disturbance on a coaxial cable was carried out by [10] using the simple proposed Dito generator model.
본문요약 정보가 도움이 되었나요?

참고문헌 (64)

  1. C. Duvvury and H. Gossner, System Level ESD Co-Design. United Kingdom: Wiley-IEEE Press, 2015. 

  2. P. Intra, A. Yawootti, U. Vinitketkumnuen, and N. Tippayawong, "Investigation on the electrical discharge characteristics of a unipolar corona-wire aerosol charger," Journal of Electrical Engineering and Technology, vol. 6, no. 4, pp. 556-562, 2011. 

    원문보기 상세보기 crossref

  3. J. Yousaf, J. Shin, K. Kim, J. Youn, D. Lee, C. Hwang, and W. Nah, "System level esd coupling analysis using coupling transfer impedance function," IEEE Transactions on Electromagnetic Compatibility, vol. 60, no. 2, pp. 310-321, April 2018. 

    상세보기 crossref

  4. J. Yousaf, M. Park, H. Lee, J. Youn, D. Lee, C. Hwang, and W. Nah, "Efficient circuit and an em model of an electrostatic discharge generator," IEEE Transactions on Electromagnetic Compatibility, vol. 60, no. 4, pp. 1078-1086, Aug 2018. 

    상세보기 crossref

  5. K. Wang, D. Pommerenke, J. M. Zhang, and R. Chundru, "The pcb level esd immunity study by using 3 dimension esd scan system," in 2004 International Symposium on Electromagnetic Compatibility, vol. 2, Silicon Valley, CA, USA, Aug 9-13 Aug 2004, pp. 343-348. 

  6. G. Muchaidze, J. Koo, Q. Cai, T. Li, L. Han, A. Martwick, K. Wang, J. Min, J. L. Drewniak, and D. Pommerenke, "Susceptibility scanning as a failure analysis tool for system-level electrostatic discharge (esd) problems," IEEE Transactions on Electromagnetic Compatibility, vol. 50, no. 2, pp. 268-276, May 2008. 

    상세보기 crossref

  7. P. Intra and N. Tippayawong, "Design and evaluation of a high concentration, high penetration unipolar corona ionizer for electrostatic discharge and aerosol charging," Journal of Electrical Engineering & Technology, vol. 8, no. 5, pp. 1175-1181, 2013. 

    원문보기 상세보기 crossref

  8. M. Honda, "Fundamental aspects of esd phenomena and its measurement techniques," IEICE Transactions on Communications, vol. 79, no. 4, pp. 457-461, 1996. 

    상세보기

  9. G. C. R. D. Leo and V. M. Primiani, "Esd in electronic equipment: coupling mechanisms and compliance testing," in Industrial Electronics, 2002. ISIE 2002. Proceedings of the 2002 IEEE International Symposium on, vol. 4, L'Aquila, Itlay, 8-11 July 2002, pp. 1382-1385. 

  10. S. Caniggia and F. Maradei, "Circuit and numerical modeling of electrostatic discharge generators," IEEE Transactions on Industry Applications, vol. 42, no. 6, pp. 1350-1357, Nov 2006. 

    상세보기 crossref

  11. D. Pommerenke, J. Fan, and J. Drewniak, "Simulation challenges in system level electrostatic discharge modeling," in 2016 IEEE/ACES International Conference on Wireless Information Technology and Systems (ICWITS) and Applied Computational Electromagnetics (ACES), Honolulu, HI, USA, March 13-18 March 2016, pp. 1-2. 

  12. D. C. Smith, "Techniques for investigating the effects of esd on electronic equipment," Journal ofPhysics: Conference Series, vol. 646, no. 1, p. 012036, 2015. 

    상세보기 crossref

  13. S. V. den Berghe and D. D. Zutter, "Study of {ESD} signal entry through coaxial cable shields," Journal of Electrostatics, vol. 44, no. 34, pp. 135 - 148, 1998. 

    상세보기 crossref

  14. Electromagnetic Compatibility (EMC) - Part 4-2: Testing and Measurement Techniques Electrostatic Discharge (ESD) Immunity Test, IEC 61 000-4-2, 2008. 

  15. J. Yousaf, J. Shin, H. Lee, J. Youn, D. Lee, C. Hwang, and W. Nah, "Esd triggered current analysis for floating eut with/without shielding of esd generator," in 16th International Symposium on Microwave and Optical Technology, Seoul, South Korea, June 26-28 June 2017, pp. 1. 

  16. J. Yousaf, J. Shin, R. Leqian, W. Nah, J. Youn, D. Lee, and C. Hwang, "Effect of esd generator ground strap configuration on esd waveform," in 2017 Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC), Seoul, South Korea, June 20-23 June 2017, pp. 121-123. 

  17. S. Caniggia and F. Maradei, "Numerical prediction and measurement of esd radiated fields by free-space field sensors," IEEE Transactions on Electromagnetic Compatibility, vol. 49, no. 3, pp. 494-503, Aug 2007. 

    상세보기 crossref

  18. J. Zhang, D. G. Beetner, R. Moseley, S. Herrin, and D. Pommerenke, "Modelling electromagnetic field coupling from an esd gun to an ic," in Electromagnetic Compatibility (EMC), 2011 IEEE International Symposium on, Aug 2011, pp. 553-558. 

  19. M. Park, J. Park, J. Kim, M. Seung, J. Choi, C. Lee, and S. Lee, "Measurement and modeling of system-level esd noise voltages in real mobile products," in 2016 Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC), vol. 01, Shenzhen, China, May 17-21 May 2016, pp. 632-634. 

  20. J. Lee, J. Lim, C. Jo, B. Seol, A. Nandy, T. Li, and D. Pommerenke, "A study of a measurement and simulation method on esd noise causing soft-errors by disturbing signals," in 2011 33rd EOS/ESD Symposium Proceedings, Anaheim, CA, USA, Sept 11-16 Sept. 2011, pp. 1-5. 

  21. R. Antong, D. Low, D. Pommerenke, and M. Z. Abdullah, "Prediction of electrostatic discharge (esd) soft error on two-way radio using esd simulation in cst and esd immunity scanning technique," in 36th International Electronics Manufacturing Technology Conference, Johor Bahru, Malaysia, Nov 11-13 Nov. 2014, pp. 1-10. 

  22. F. Centola, D. Pommerenke, W. Kai, T. V. Doren, and S. Caniggia, "Esd excitation model for susceptibility study," in 2003 IEEE Symposium on Electromagnetic Compatibility. Symposium Record (Cat. No. 03CH37446), vol. 1, Boston, MA, USA, USA, Aug 18-22 Aug. 2003, pp. 58-63. 

  23. O. Fujiwara, X. Zhang, and Y. Yamanaka, "Fdtd simulation of electrostatic discharge current by esd testing," IEICE Trans. Commun. , vol. 86, pp. 2390-2396, 2003. 

  24. J. s. Lee, D. Pommerenke, J. d. Lim, and B. s. Seol, "Esd field coupling study in relation with pcb gnd and metal chassis," in 2009 20th International Zurich Symposium on Electromagnetic Compatibility, Zurich, Switzerland, Jan 12-16 Jan. 2009, pp. 153-156. 

  25. K. H. Kim and Y. Kim, "Systematic analysis methodology for mobile phone's electrostatic discharge soft failures," IEEE Transactions on Electromagnetic Compatibility, vol. 53, no. 3, pp. 611-618, Aug 2011. 

    상세보기 crossref

  26. J. Park, J. Lee, B. Seol, and J. Kim, "Efficient calculation of inductive and capacitive coupling due to electrostatic discharge (esd) using peec method," IEEE Transactions on Electromagnetic Compatibility, vol. 57, no. 4, pp. 743-753, Aug 2015. 

    상세보기 crossref

  27. F. zur Nieden, S. Scheier, and S. Frei, "Circuit models for esd-generator- cable field coupling configurations based on measurement data," in Electromagnetic Compatibility (EMC EUROPE), 2012 International Symposium on, Rome, Italy, Sept 17-21 Sept. 2012, pp. 1-6. 

  28. T. Yoshida and N. Masui, "A study on system-level esd stress simulation using circuit simulator," in 2013 Asia-Pacific Symposium on Electromagnetic Compatibility (APEMC), Melbourne, VIC, Australia, May 20-23 May 2013, pp. 1-4. 

  29. T. Yoshida, "A study on transmission line modeling method for system- level esd stress simulation," in 2015 Asia-Pacific Symposium on Electromagnetic Compatibility (APEMC), Taipei, Taiwan, May 26-29 May 2015, pp. 577-580. 

  30. Y. Xiu, N. Thomson, R. Mertens, and E. Rosenbaum, "S-parameter based modeling of system-level esd test bed," in 2015 37th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD), Reno, NV, USA, Sept 27 Sept.-2 Oct. 2015, pp. 1-10. 

  31. S. Zhao, C. Zhou, Z. Liang, Z. Qian, and Z. Wang, "Modeling electromagnetic immunity of ldo under esd electromagnetic field coupling," in 2016 Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC), vol. 01, Shenzhen, China, May 17-21 May 2016, pp. 355-358. 

  32. T. Takada, T. Sekine, and H. Asai, "Circuit/electromagnetic hybrid simulation of electrostatic discharge in contact discharge mode," in Electromagnetic Compatibility (EMC EUROPE), 2012 International Symposium on, Rome, Italy, Sept 17-21 Sept. 2012, pp. 1-6. 

  33. B. S. Seol, J. S. Lee, J. D. Lim, H. Lee, H. Park, A. Nandy, and D. Pommerenke, "A circuit model for esd performance analysis of printed circuit boards," in 2008 Electrical Design of Advanced Packaging and Systems Symposium, Seoul, South Korea, Dec 10-12 Dec. 2008, pp. 120-123. 

  34. (2007) Industry Council on ESD Target Levels White Paper 1: A Case for Lowering Component Level HBM/MM ESD Specifications and Requirement. [Online]. Available: www.esda.org. 

  35. Joint JEDEC/ESDA Standard for Electrostatic Discharge Sensitivity Test Human Body Model (HBM) Component Level, ESDA ANSI/ESDA/JEDEC JS-001-2014, 2014. 

  36. (2007) ANSI/ESD S20.20-2007 Protection of Electrical and Electronic Parts, Assemblies and Equipment, ESD Association. [Online]. Available: http://www.esda.org/Documents.html#s2020ANSI/ESDS20.20-2007 

  37. Field-Induced Charged-Device Model Test Method for ElectrostaticDischarge-Withstand Thresholds of Microelectronic Components, JEDEC JESD22-C101F, 2013. 

  38. (2017) ESD compliance-standards. [Online]. Available: https://www.esdguns.com/content/category/6-esd-compliance-standards 

  39. (2010) Industry Council on ESD Target Levels White Paper 2: A Case for Lowering Component Level CDM ESD Specifications and Requirements, Revision 2. [Online]. Available: www.esda.org 

  40. (2013) Electrostatic Discharge (ESD) Technology Roadmap Revised March 2013. [Online]. Available: http://www.esda.org/documents/2013ElectrostaticDischargeRoadmap.pdf 

  41. Electrostatic Discharge Sensitivity Testing Charged Device Model (CDM) Component Level, American National Standards Institute (ANSI) ANSI CDM ANSI/ESD S5.3.1-2009, 2009. 

  42. Electromagnetic Disturbances for Medical Electrical Equipment, IEC 60 601-1-2, 2014. 

  43. J. Lee, J. Lim, B. Seol, Z. Li, and D. Pommerenke, "A novel method for esd soft error analysis on integrated circuits using a tem cell," in Electrical Overstress / Electrostatic Discharge Symposium Proceedings 2012, Tucson, AZ, USA, Sept 9-14 Sept. 2012, pp. 1-6. 

  44. (2014) System level ESD-Expanded. [Online]. Available: https://goo.gl/hJ831N 

  45. (2010) Human Body Model (HBM) vs. IEC 6100042 - ON Semiconductor. [Online]. Available: https://www.onsemi.com/pub/Collateral/TND410-D.PDF 

  46. Road Vehicles Test Methods for Electrical Disturbances from Electrostatic Discharge, International Standards Organization (ISO) ISO 10 605:2008, 2008. 

  47. (2010) Industry Council on ESD Target Levels White Paper 3: System Level ESD Part I: Common Misconceptions and Recommended Basic Approaches. [Online]. Available: www.esda.org 

  48. D. Pommerenke and M. Aidam, "Esd: waveform calculation, field and current of human and simulator esd," Journal of Electrostatics, vol. 38, no. 1, pp. 33 - 51, 1996, 1995 EOS/ESD Symposium. 

    상세보기 crossref

  49. G. Cerri, R. D. Leo, and V. M. Primiani, "Esd indirect coupling modeling," IEEE Transactions on Electromagnetic Compatibility, vol. 38, no. 3, pp. 274-281, Aug 1996. 

    상세보기 crossref

  50. J. S. Lee Iljin, Kim Junghyun, "A g-band frequency doubler using a commercial 150 nm gaas phemt technology," J Electromagn Eng Sci, vol. 17, no. 3, pp. 147-152, 2017. 

    원문보기 상세보기 crossref

  51. G. Alsharahi, A. M. M. Mostapha, A. Faize, and A. Driouach, "Modelling and simulation resolution of ground-penetrating radar antennas," Journal of Electromagnetic Engineering And Science, vol. 16, no. 3, pp. 182-190, 2016. 

    원문보기 상세보기 crossref

  52. M. Amin, J. Yousaf, and S. Iqbal, "Single feed circularly polarised omnidirectional bifilar helix antennas with wide axial ratio beamwidth," IET Microwaves, Antennas Propagation, vol. 7, no. 10, pp. 825-830, July 2013. 

    상세보기 crossref

  53. K. Wang, D. Pommerenke, R. Chundru, T. V. Doren, F. P. Centola, and J. S. Huang, "Characterization of human metal esd reference discharge event and correlation of generator parameters to failure levels-part ii: correlation of generator parameters to failure levels," IEEE Transactions on Electromagnetic Compatibility, vol. 46, no. 4, pp. 505-511, Nov 2004. 

    상세보기 crossref

  54. J. Park, J. Kim, J. Lee, S. Kim, and B. Seol, "Fast calculation of system- level esd noise coupling to a microstrip line using peec method," in 2015 IEEE Electrical Design ofAdvanced Packaging and Systems Symposium (EDAPS), Seoul, South Korea, Dec 14-16 Dec. 2015, pp. 132-135. 

  55. J. Koo, Q. Cai, G. Muchaidze, A. Martwick, K. Wang, and D. Pom-merenke, "Frequency-domain measurement method for the analysis of esd generators and coupling," IEEE Transactions on Electromagnetic Compatibility, vol. 49, no. 3, pp. 504-511, Aug 2007. 

    상세보기 crossref

  56. F. zur Nieden, S. Frei, and D. Pommerenke, "A combined impedance measurement method for esd generator modeling," in 10th International Symposium on Electromagnetic Compatibility, York, UK, Sept 26-30 Sept. 2011, pp. 476-481. 

  57. W. Huang, D. Pommerenke, J. Xiao, D. Liu, J. Min, G. Muchaidze, S. Kwon, and K. H. Kim, "A measurement technique for esd current spreading on a pcb using near field scanning," in 2009 IEEE International Symposium on Electromagnetic Compatibility, Austin, TX, USA, Aug 17-21 Aug. 2009, pp. 18-23. 

  58. G. Caccavo, G. Cerri, V. M. Primiani, L. Pierantoni, and P Russo, "Esd field penetration into a populated metallic enclosure a hybrid time- domain approach," IEEE Transactions on Electromagnetic Compatibility, vol. 44, no. 1, pp. 243-249, Feb 2002. 

    상세보기 crossref

  59. J. Yousaf, H. Jung, K. Kim, and W. Nah, "Design, analysis, and equivalent circuit modeling of dual band pifa using a stub for performance enhancement," Journal of Electromagnetic Engineering And Science, vol. 16, no. 3, pp. 169-181, 2016. 

    원문보기 상세보기 crossref

  60. C. Qing, J. Koo, A. Nandy, D. Pommerenke, J. S. Lee, and B. S. Seol, "Advanced full wave esd generator model for system level coupling simulation," in 2008 IEEE International Symposium on Electromagnetic Compatibility, Detroit, MI, USA, Aug 18-22 Aug. 2008, pp. 1-6. 

  61. J. Yousaf, J. Shin, H. Lee, W. Nah, J. Youn, D. Lee, and C. Hwang, "Efficient circuit and em model of electrostatic discharge generator," in 2017 IEEE International Symposium on Electromagnetic Compatibility Signal/Power Integrity (EMCSI), Washington, DC, USA, Aug 7-11 Aug. 2017, pp. 164-168. 

  62. D. Liu, A. Nandy, D. Pommerenke, S. J. Kwon, and K. H. Kim, "Full wave model for simulating a noiseken esd generator," in 2009 IEEE International Symposium on Electromagnetic Compatibility, Austin, TX, USA, Aug 17-21 Aug. 2009, pp. 334-339. 

  63. K. Wang, D. Pommerenke, R. Chundru, T. V. Doren, J. L. Drewniak, and A. Shashindranath, "Numerical modeling of electrostatic discharge generators," IEEE Transactions on Electromagnetic Compatibility, vol. 45, no. 2, pp. 258-271, May 2003. 

    상세보기 crossref

  64. D. Johnsson and H. Gossner, "Study of system esd codesign of a realistic mobile board," in EOS/ESD Symposium Proceedings, Anaheim, CA, USA, Sept 11-16 Sept. 2011, pp. 1-10. 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD(Hybrid)

저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로