$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

치과보철물의 재제작 실태에 관한 예비조사
A pilot study on remake of dental prosthesis of dental laboratory working 원문보기

대한치과기공학회지 = The Journal of Korean Academy of Dental Technology, v.40 no.3, 2018년, pp.173 - 180  

남신은 (바론기공소)

Abstract AI-Helper 아이콘AI-Helper

Purpose: The purpose of this study was to verify the remake rate and cause of dental prosthesis and to investigate major factors of remake of dental prosthesis. Methods: This study carried out self-administered questionnaire survey from 126 nationwide dental laboratory CEO and directors, which was c...

주제어

표/그림 (5)

AI 본문요약
AI-Helper 아이콘 AI-Helper

문제 정의

  • 본 연구는 치과보철물 제작처인 치과기공소(실)를 중심으로 치과보철물의 월평균 재제작율을 알아보고 그 원인을 파악함으로써 치과보철물 재제작으로 인한 치과 기공소의 경제적 손실을 최소화하고자 하며, 치과기공사의 업무관련 특성과 치과보철물 재제작율의 상관관계를 분석하여 치과보철물의 재제작에 대한 기초자료를 제공하고자 한다.
본문요약 정보가 도움이 되었나요?

질의응답

핵심어 질문 논문에서 추출한 답변
치과보철치료는 어떻게 이뤄지는가? 치과보철치료는 치과의사, 치과위생사, 치과기공사등 치과의료 인력간의 협업을 바탕으로 이루어진다. 치과보철치료의 과정에서 최종 치과보철물이 구강 내에서잘 맞지 않는 경우 재제작을 필요로 하는 경우가 발생한다.
치과보철물 재제작의 원인으로는 어떤 것들이 있는가? 이에 치과보철물 재제작의 원인을 파악 하고 그것의 감소방안을 강구해야 할 필요가 있다. 치과보철물 재제작의 주 원인으로는 치과에서 행해지는 인상채득이 63.7%, 치과진료과정에서의 오류가 17.2% 로 응답자의 약 80.9%가 치과에서 그 원인을 제공한다고 응답하였다. 이는 치과보철물 재제작의 주 원인으로 인상체나 재료 변형 등 환자와 기공물에 대한 부정확한 정보제공을 꼽아 치과에서 그 원인을 제공한다고 보고한 선행연구와 일치하는 경향이었다(Lee et al, 2008;Moon, 2009; Kim & Lee, 2011; Lee & Cho, 2016).
치과기공계는 어떤 어려움에 처해 있는가? 현재 치과기공계는 치과기공사 개인뿐만 아니라 치과 기공소의 경영과 관련한 제작환경에 대해 많은 어려움에 봉착해 있다(Park & Lee, 2000; O, 2003; Moon, 2009; Kim, 2015; Nam & Lee, 2017). 치과보철물 재제작 시 치과기공소에서 대부분 기공요금을 부담하고 있는 관행으로 인해 치과보철물의 재제작은 치과기공소의 경영악화에 영향을 미치는 요인으로 작용하고 있다 (Moon, 2009; Lee & Cho, 2016; Nam & Lee, 2017).
질의응답 정보가 도움이 되었나요?

참고문헌 (13)

  1. Cho MH, Lee HK, Nam SE. A study on the production environment of crown prosthesis for National Health Insurance benefit. J Kor Aca Den Tec, 40(2), 73-82, 2018. 

  2. Kim ES. The associations between the term of establishment, the scale, the payment system and the salary, and productivity of dental laboratories in Seoul. J Kor Aca Den Tec, 18(1), 73-95, 1996. 

  3. Kim HJ. A research study on korean dental laboratory management deterioration cause and improvement plan. Department of Dental laboratory Science, Graduate School, Catholic University of Pusan, Master's thesis, 2015. 

  4. Kim JS, Lee HS. A study on remake of dental prosthesis according to dental Laboratory characteristics. J Kor Aca Den Tec, 33(3), 227-236, 2011. 

  5. Kwon HM. 경영관리: 치과기공소경영관리. Jisung Publishing Co, 203-224, 1999. 

  6. Lambert H, Durand JC, Jacquot B, Faques M. Dental biomaterials for chairside CAD/CAM: state of the art. J Adv Prosthodont, 9(6), 486-495, 2017. 

  7. Lee HK, Cho MH. A study on the dental field of present health insurance for custom-made prosthetic implant by dental technicians. J Kor Aca Den Tec, 38(1), 9-22, 2016. 

  8. Lee SK, Hwang KS, Kim JH, Seong JM, Park YD. Research about remakes improvement plan of dental prosthesis of dental laboratory in Seoul and Gyeongggi. J Korean Acad Oral Health, 32(4), 600-610, 2008. 

  9. Moon GT. Analysis of cause for reproduction of dental prosthesis by a dental laboratory and suggestions for its improvement. Graduated School of Health & Environment, Wonkwang University, Master's thesis, 2009. 

  10. Nam SE, Lee HK. A study of manufacturing conditions for dental prosthesis by dental technicians. Journal of The Health Care and Life Science, 5(2), 105-110, 2017. 

  11. O SM. A study on the organizational commitment turnover intention of dental technicians. The Graduate School of Law and Public Health Administration, Dan Kook University, Mater's Thesis, 2003. 

  12. Park MH, Lee SR. Comparison analysis of a cost price for dental prosthetic restoration. J Kor Aca Den Tec, 22(1), 153-178, 2000. 

  13. Yoo HG. Research about process control of dental surgery start of work water: to dental surgery start of work cattle start of work water manufacture center. Graduated School of Business Administration, Hannam University, Master's thesis, 2002. 

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로