최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국수소 및 신에너지학회 논문집 = Transactions of the Korean Hydrogen and New Energy Society, v.30 no.6, 2019년, pp.531 - 539
장정윤 (한국에너지기술연구원 연료전지연구실) , 임성대 (한국에너지기술연구원 연료전지연구실) , 박석희 (한국에너지기술연구원 연료전지연구실) , 정남기 (충남대학교 에너지과학기술대학원) , 박구곤 (한국에너지기술연구원 연료전지연구실)
The development of cost-effective electrocatalysts with high durability is one of the most important challenges for the commercialization of polymer electrolyte fuel cells (PEFCs). The durability of the electrocatalyst has been studied in terms of structural change in the active metal and the suppor...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
폴리올법은 무엇인가? | 폴리올법은 용매이자 환원제로 EG를 사용하며 유기계 안정제를 필요로 하지 않으면서 백금의 입자 크기를 용이하게 제어할 수 있는 촉매 합성법이다. 산화과정에서 생성되는 글리콜 음이온은 환원된 백금원자의 표면에 흡착되어 음의 표면 전위를 형성하고, 백금 원자간 전기적 반발력을 형성하여 입자간 뭉침 현상을 방지해주는 안정제 역할을 하게 된다. | |
글리콜 음이온의 역할은 무엇인가? | 폴리올법은 용매이자 환원제로 EG를 사용하며 유기계 안정제를 필요로 하지 않으면서 백금의 입자 크기를 용이하게 제어할 수 있는 촉매 합성법이다. 산화과정에서 생성되는 글리콜 음이온은 환원된 백금원자의 표면에 흡착되어 음의 표면 전위를 형성하고, 백금 원자간 전기적 반발력을 형성하여 입자간 뭉침 현상을 방지해주는 안정제 역할을 하게 된다. 따라서 pH 조절을 통해 글리콜 음이온의 농도를 조절함으로써 금속 입자의 크기를 조절 할 수 있다. | |
지지체의 열화 문제를 해결하기 위한 내구성이 높은 지지체 적용에 대한 연구에는 어떤 것들이 있는가? | 이에 대한 해결책으로 내구성이 높은 지지체 활용에 대한 연구가 진행되고 있다. 이에 따라 carbon nanofiber (CNF), carbon nanotube (CNT), silica-coated carbon nanofiber 등의 고전압환경에서 높은 내구성을 가지는 지지체의 적용에 대한 연구가 이루어지고 있다5,16). 일반적으로 가속 내구성 시험(accelerated stress test, AST)을 통해 Pt/CNF, Pt/Vulcan 등 촉매의 지지체 부식으로부터 생성된CO2의 농도를 측정하여 탄소부식의 정도를 상대적으로 비교분석할 수 있으며, 지지체의 구조적 차이에 의해 야기된 성능저하를 확인할 수 있다17). |
R. L. Borup, J. R. Davey, F. H. Garzon, D. L. Wood, and M. A. Inbody, "PEM fuel cell electrocatalyst durability measurements", Journal of Power Sources, Vol. 163, No. 1, 2006, pp. 76-81, doi: https://doi.org/10.1016/j.jpowsour.2006.03.009.
R. Borup, J. Meyers, B. Pivovar, Y. S. Kim, R. Mukundan, N. Garland, D. Myers, M. Wilson, F. Garzon, D. Wood, P. Zelenay, K. More, K. Stroh, T. Zawodzinski, J. Boncella, J. E. McGrath, M. Inada, K. Miyatake, M. Hori, K. Ota, Z. Ogumi, S. Miyata, A. Nishikata, Z. Siroma, Y. Uchimoto, K. Yasuda, K. Kimijima and N. Iwashita, "Scientific aspects of polymer electrolyte fuel cell durability and degradation", Chem. Rev., Vol. 107, No. 10, pp. 3904-3951, doi: https://doi.org/10.1021/cr050182l.
P. Strasser and S. Kuhl, "Dealloyed Pt-based core-shell oxygen reduction electrocatalysts", Nano Energy, Vol. 29, 2016, pp. 166-177, doi: https://doi.org/10.1016/j.nanoen.2016.04.047.
M. Shao, Q. Chang, J. P. Dodelet, and R. Chenitz, "Recent Advances in Electrocatalysts for Oxygen Reduction Reaction", Chem. Rev., Vol. 116, No. 6, 2016, pp. 3594-3657, doi: https://doi.org/10.1021/acs.chemrev.5b00462.
J. Islam, S. K. Kim, E. Lee, and G. G. Park, "Durability enhancement of a Pt/C electrocatalyst using silica-coated carbon nanofiber as a corrosion-resistant support", International Journal of Hydrogen Energy, Vol. 44, No. 8, 2019, pp. 4177-4187, doi: https://doi.org/10.1016/j.ijhydene.2018.12.138.
Y. Shao, G. Yin, and Y. Gao, "Understanding and approaches for the durability issues of Pt-based catalysts for PEM fuel cell", Journal of Power Sources, Vol. 171, No. 2, 2007, pp. 558-566, doi: https://doi.org/10.1016/j.jpowsour.2007.07.004.
K. H. Kim, J. D. Lee, H. Lee, S. H. Park, S. D. Yim, N. Jung, and G. G. Park, "Preparation of Shape-Controlled PAlladium Nanoparticles for Electrocatalysts and Their Performance Evaluation for Oxygen Reduction Reaction", Transactions of the Korean hydrogen and new energy society, Vol. 29, No. 5, 2018, pp. 450-457, doi: https://doi.org/10.7316/KHNES.2018.29.5.450.
C. A. Reiser, L. Bregoli, T. W. Patterson, J. S. Yi, J. D. Yang, M. L. Perry, and T. D. Jarvi, "A Reverse-Current Decay Mechanism for Fuel Cells", Electrochemical and Solid State Letters, Vol. 8, No. 6, 2005, pp. A276, doi: https://doi.org/10.1149/1.1896466.
J. P. Meyers and R. M. Darling, "Model of Carbon Corrosion in PEM Fuel Cells", Journal of The Electrochemical Society, Vol. 153, No. 8, 2006, pp. A1432-A1442, doi: https://doi.org/10.1149/1.2203811.
A. P. Younga, J. Stumperc, and E. Gyenge, "Characterizing the Structural Degradation in a PEMFC Cathode Catalyst Layer: Carbon Corrosion", J. Electrochem. Soc., Vol. 156, No. 8, 2009, pp. B913-B922, doi: https://doi.org/10.1149/1.3139963.
L. Castanheira, L. Dubau, M. Mermoux, G. Berthome, N. Caque, E. Rossinot, M. Chatenet, and F. Maillard, "Carbon Corrosion in Proton-Exchange Membrane Fuel Cells: From Model Experiments to Real-Life Operation in Membrane Electrode Assemblies", ACS Catal., Vol. 4, No. 7, 2014, pp. 2258-2267, doi: https://doi.org/10.1021/cs500449q.
J. C. Meier, C. Galeano, I. Katsounaros, A. A. Topalov, A. Kostka, F. Schuth, and K. J. J. Mayrhofer, "Degradation Mechanisms of Pt/C Fuel Cell Catalysts under Simulated Start-Stop Conditions", ACS Catal., Vol. 2, No. 5, 2012, pp. 832-843, doi: https://doi.org/10.1021/cs300024h.
J. Speder, A. Zana, I. Spanos, J. J. K. Kirkensgaard, K. Mortensen, M. Hanzlik, and M. Arenz, "Comparative degradation study of carbon supported proton exchange membrane fuel cell electrocatalysts - The influence of the platinum to carbon ratio on the degradation rate", Journal of Power Sources, Vol. 261, 2014, pp. 14-22, doi: https://doi.org/10.1016/j.jpowsour.2014.03.039.
J. Wang, G. Yin, Y. Shao, S. Zhang, Z. Wang, and Y. Gao, "Effect of carbon black support corrosion on the durability of Pt/C catalyst", Journal of Power Sources, Vol. 171, No. 2, 2007, pp. 331-339, doi: https://doi.org/10.1016/j.jpowsour.2007.06.084.
R. Sharma and S. M. Andersen, "Quantification on Degradation Mechanisms of Polymer Electrolyte Membrane Fuel Cell Catalyst Layers during an Accelerated Stress Test", ACS Catal., Vol. 8, No. 4, 2018, pp. 3424-3434, doi: https://doi.org/10.1021/acscatal.8b00002.
E. Antolini, "Carbon supports for low-temperature fuel cell catalysts", Applied Catalysis B: Environmental, Vol. 88, No. 1-2, 2009, pp. 1-24, doi: https://doi.org/10.1016/j.apcatb.2008.09.030.
J. H. Park, S. M. Hwang, G. G. Park, S. H. Park, E. D. Park, and S. D. Yim, "Variations in performance-degradation behavior of Pt/CNF and Pt/C MEAs for the same degree of carbon corrosion", Electrochimica Acta, Vol. 260, 2018, pp. 674-683, doi: https://doi.org/10.1016/j.electacta.2017.12.015.
D. A. Stevensa, M. T. Hicksc, G. M. Haugenc, and J. R. Dahna, "Ex Situ and In Situ Stability Studies of PEMFC Catalysts Effect of Carbon Type and Humidification on Degradation of the Carbon", J. Electrochem. Soc., Vol. 152, No. 12, 2005, pp. A2309-A2315, doi: https://doi.org/10.1149/1.2097361.
F. Coloma, A. Sepulvedaescribano, and F. Rodriguezreinoso, "Heat-Treated Carbon-Blacks as Supports for Platinum Catalysts", Journal of Catalysis, Vol. 154, No. 2, 1995, pp. 299-305, doi: https://doi.org/10.1006/jcat.1995.1171.
L. Castanheira, W. O. Silva, F. H. B. Lima, A. Crisci, L. Dubau, and F. Maillard, "Carbon Corrosion in Proton-Exchange Membrane Fuel Cells: Effect of the Carbon Structure, the Degradation Protocol, and the Gas Atmosphere", ACS Catal., Vol. 5, No. 4, 2015, pp. 2184-2194, doi: https://doi.org/10.1021/cs501973j.
X. X. Wang, Z. H. Tan, M. Zheng, and J. N. Wang, "Carbon nanocages: A new support material for Pt catalyst with remarkably high durability", Scientific Reports, Vol. 4437, No. 4, 2014, doi: https://doi.org/10.1038/srep04437.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.