최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기마이크로전자 및 패키징 학회지 = Journal of the Microelectronics and Packaging Society, v.26 no.4, 2019년, pp.119 - 126
A flexible thermoelectric module, which consisted of 18 pairs of Bi2Te3-based hot-pressed p-n thermoelectric legs, were processed by filling the module inside with polydimethylsiloxane (PDMS) and removing the top and bottom substrates. Its power generation properties and bending characteristics were...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
웨어러블 열전발전소자가 가져야 하는 이상적인 성질은 무엇인가? | 인체열 에너지를 회수하고자 하는 웨어러블 열전발전소자는 인체와의 접촉면적을 증가시킬 수 있게 인체의 굴곡에 따라 형태 변형이 가능하도록 유연성을 갖는 것이 이상적이다. 그러나 기존의 열전모듈은 상부 및 하부 세라믹 기판에 Cu 전극들을 접합한 후, 다수의 p형과 n형 열전 레그(leg)들을 Cu 전극들에 접합하여 이루어지기 때문에, 유연성을 전혀 갖지 못하게 된다. | |
유연열전모듈의 굽힘곡률반경에 따른 저항변화율은 어떤 모습을 보이는가? | 41 μW의 최대전력을 얻을 수있었다. 유연열전모듈을 40~10 mm의 굽힘곡률반경으로 굽혀도 저항 증가가 1% 미만으로 거의 발생하지 않았으며, 굽힘곡률반경 25 mm로 30,000회까지 반복굽힘을 인가하여도 저항변화율이 1% 미만으로 유지되는 우수한 신뢰성을 나타내었다. 유연열전모듈에서 전극 사이의 간격이 멀어질수록 모듈의 유연성은 증가하나 단위면적당 열전발전상능이 저하하며 전극 사이의 간격이 가까워지면 그 반대 현상이 나타날 것이기에, 향후 열전발전특성과 유연특성을 최적화하기 위해서는 전극 피치에 따른 이들 특성의 변화거동에 대한 연구가 필요할 것으로 판단된다. | |
웨어러블 전자기기의 마이크로 에너지 하비스팅 소스로 무엇을 사용할 수 있는가? | 최근 ICT 산업을 이끌 성장동력으로서 웨어러블 전자기기가 급부상함에 따라, 이들 웨어러블 전자기기의 보조전원으로 사용하기 위해 마이크로 에너지 하비스팅에 대한 연구가 활발히 진행되고 있다.1-8) 웨어러블 전자기기의 마이크로 에너지 하비스팅 소스로는 실내 태양광 에 너지, 인체 진동에너지 및 인체 열에너지가 적용가능한데, 인체 열에너지를 이용한 마이크로 열전발전이 실내 태양광이나 인체 진동에너지에 비해 더 높은 출력밀도를 갖는다고 보고되고 있다.2) 이에 따라 최근 지문, 얼굴 , 눈동자와 같은 바이오정보로 신원을 확인하는 바이오 인식센서, 저출력 모바일 기기, 위치 감지 및 ID 인식장치, 헬스모니터링 시스템용 웨어러블 기기, 디스포저블밴디지형 뮤직플레이어 등과 같은 웨어러블 전자기기의 전원으로서 인체 열에너지를 이용한 마이크로 에너지 하비스팅용 열전발전소자에 대한 연구개발이 활발히 진행 되고 있다. |
J. H. Kim, W. J. Kim, and T. S. Oh, "Thermoelectric Thin Film Devices for Energy Harvesting with the Heat Dissipated from High-power Light-emitting Diodes", J. Electron. Mater., 45(7), 3410 (2016).
R. J. M. Vullers, R. van Schaijk, I. Doms, C. Van Hoof, and R. Mertens, "Micropower Energy Harvesting", Solid-State Electron., 53, 684 (2009).
T. Huesgen, P. Woias, and N. Kockmann, "Design and Fabrication of MEMS Thermoelectric Generators with High Temperature Efficiency", Sens. Actuators A., 145-146, 423 (2008).
W. Wang, V. Cionca, N. Wang, M. Hayes, B. O'Flynn, and C. O'Mathuna, "Thermoelectric Energy Harvesting for Building Energy Management Wireless Sensor Networks", Inter. J. Distrib. Sens. Netw., 2013, 232438 (2013).
W. Glatz, S. Muntwyler, and C. Hierold, "Optimization and Fabrication of Thick Flexible Polymer Based Micro Thermoelectric Generator", Sens. Actuators A., 132, 337 (2006).
K. J. Shin, and T. S. Oh, "Micro-Power Generation Characteristics of Thermoelectric Thin Film Devices Processed by Electrodeposition and Flip-Chip Bonding", J. Electron. Mater., 44(6), 2026 (2015).
K. J. Shin, and T. S. Oh, "Thermoelectric Power-Generation Characteristics of a Thin-Film Device Processed by the Flip-Chip Bonding of $Bi_2Te_3$ and $Sb_2Te_3$ Thin-Film Legs Using an Anisotropic Conductive Adhesive", Mater. Trans., 56(10), 1719 (2015).
V. Leonov, T. Torfs, P. Fiorini, and C. Van Hoof, "Thermoelectric Converters of Human Warmth for Self-Powered Wireless Sensor Nodes", IEEE Sens. J., 7(5), 650 (2007).
M. Kishi, H. Nemoto, T. Hamao, M. Yamamoto, S. Sudou, M. Mandai, and S. Yamamoto, "Micro Thermoelectric Modules and Their Application to Wristwatches as an Energy Source", Proc. 18th International Conference on Thermoelectrics (ICT), Baltimore, USA, 301, IEEE (1999).
G. J. Snyder, "Small Thermoelectric Generators", Electrochem. Soc. Interface., Fall, 54 (2008).
J. H. Kim, W. J. Kim, and T. S. Oh, "Thermoelectric Thin Film Devices for Energy Harvesting with the Heat Dissipated from High-Power Light-Emitting Diodes", J. Electron. Mater., 45(7), 3410 (2016).
S. H. Lee, H. Shen, and S. Han, "Flexible Thermoelectric Module Using Bi-Te and Sb-Te Thin Films for Temperature Sensors", J. Electron. Mater., 48(9), (2019).
Y. Du, J. Xu, B. Paul, and P. Eklund, "Flexible Thermoelectric Materials and Devices", Appl. Mater. Today., 12, 366 (2018).
S. Zhang, Z. Fan, X. Wang, Z. Zhang, and J. Ouyang, "Enhancement of the Thermoelectric Properties of PEDOT:PSS via One-Step Treatment with Cosolvents or Their Solutions of Organic Salts", J. Mater. Chem., A6, 7080 (2018).
R. Maeda, H. Kawakami, Y. Shinohara, I. Kanazawa, and M. Mitsuishi, "Thermoelectric Properties of PEDOT/PSS Films Prepared by a Gel-Film Formation Process", Mater. Lett., 251, 169 (2019).
Science Today, YTN Science Inc. Oct. (2015) from https://science.ytn.co.kr/program/program_view.php?s_mcd0082&s_hcd&key201510201612132845&page1970
A. J. Minnich, M. S. Dresselhaus, Z. F. Ren, and G. Chen, "Bulk Nanostructured Thermoelectric Materials: Current Research and Future Prospects", Energy Environ. Sci., 2, 466 (2009).
D. H. Park, M. Y. Kim, and T. S. Oh, "Thermoelectric Energyconversion Characteristics of the n-type $Bi_2(Te,Se)_3$ Nanocomposites Processed with Carbon Nanotube Dispersion", Current Appl. Phys., 11, S41 (2011).
D. H. Park, M. R. Roh, M. Y. Kim, and T. S. Oh, "Thermoelectric Properties of the n-Type $Bi_2(Te,Se)_3$ Processed by Hot Pressing", J. Microelectron. Packag. Soc., 17(2), 49 (2010).
M. S. Dresselhaus, G. Chen, M. Y. Tang, R. Yang, H. Lee, D. Wang, Z. Ren, J. -P. Fleurial, and P. Gogna, "New Directions for Low-Dimensional Thermoelectric Materials", Adv. Mater., 19, 1 (2007).
B. Poudel, Q. Hao, Y. Ma, Y. Lan, A. Minnich, B. Yu, X. Yan, D. Wang, A. Muto, D. Vashaee, X. Chen, J. Liu, M. S. Dresselhaus, G. Chen, and Z. Ren, "High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys", Science, 320, 634 (2008).
X. B. Zhao, X. H. Ji, Y. H. Zhang, T. J. Zhu, J. P. Tu, and X. B. Zhang, "Bismuth Telluride Nanotubes and the Effects on the Thermoelectric Properties of Nanotube-Containing Nanocomposites", Appl. Phys. Lett., 86, 62111 (2005).
T. S. Oh, D. B. Hyun, and N. V. Kolomoets, "Thermoelectric Properties of the Hot-Pressed $(Bi,Sb)_2(T3,Se)_3$ Alloys", Scripta Meter., 42, 849 (2000).
H. J. Kim, H. C. Kim, D. B. Hyun, and T. S. Oh, "Thermoelectric Properties of p-Type $(Bi,Sb)_2Te_3$ Alloys Fabricated by the Hot Pressing Method", Met. Mater., 4(1), 75 (1998).
B. Y. Jung, T. S. Oh, D. B. Hyun, and J. D. Shim, "Thermoelectric Properties of $(Bi_{0.25}Sb_{0.75})_2Te_3$ Prepared by Mechanical Allying and Hot Pressing", J. Korean Phys. Soc., 31(1), 219 (1997).
H. C. Kim, B. Y. Jung, D. B. Hyun, and T. S. Oh, "Mechanical Alloying Process and Thermoelectric Properties of p-Type $(Bi_{1-x}Sb_x)_2Te_3$ ", J. Korean Inst. Met. Mater., 36(3), 416 (1998).
B. Y. Jung, T. S. Oh, S. E. Nam, D. B. Hyun, and J. D. Shim, "Thermoelectric Properties of p-Type $(Bi_{0.25}Sb_{0.75})_2Te_3$ Fabricated by Mechanical Allying Process", J. Korean Inst. Met. Mater., 35(1), 153 (1997).
D. B. Hyun, J. S. Hwang, J. D. Shim, and T. S. Oh, "Thermoelectric Properties of $(Bi_{0.25}Sb_{0.75})_2Te_3$ Alloys Fabricated by Hot-Pressing Method", J. Mater. Sci., 36, 1285 (2001).
H. J. Kim, T. S. Oh, and D. B. Hyun, "Thermoelectric Properties of the Hot-Pressed $Bi_2(Te_{1-x}Se_x)_3$ Alloys with the $Bi_2Se_3$ Content", Korean J. Mater. Res., 8(5), 408 (1998).
H. J. Kim, J. S. Choi, D. B. Hyun, and T. S. Oh, "Powder Characteristics and Thermoelectric Properties of n-Type $Bi_2(Te_{0.95}Se_{0.05})_3$ Fabricated by Mechanical Alloying Process", J. Korean Inst. Met. Mater., 35(2), 223 (1997).
H. J. Kim, J. S. Choi, D. B. Hyun, and T. S. Oh, "Microstructure and Thermoelectric Properties of n-Type $Bi_2(Te_{0.95}Se_{0.05})_3$ Fabricated by Mechanical Alloying Process and Hot Pressing Methods", Korean J. Mater. Res., 7(1), 40 (1997).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.