최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓小兒齒科學會誌 = Journal of the Korean academy of pediatric dentistry, v.46 no.1, 2019년, pp.57 - 63
박영준 (원광대학교 부속치과병원 소아치과) , 이제우 (원광대학교 치과대학 소아치과학교실 및 치의학교육연구센터) , 라지영 (원광대학교 치과대학 소아치과학교실 및 치의학교육연구센터)
This study aimed to determine whether the curing times of Xtra Power and High Power modes of high-power light emitting diode (LED) curing light are sufficient for polymerization of resin sealants. The specimens were prepared and their microhardness values were measured and compared with those of spe...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
레진 기반 고출력 LED 광중합기을 제조사가 추천하는 사용 방법은 무엇인가? | 최근에는 수 초 내에 레진 기반의 물질을 중합하는 고출력 LED 광중합기가 소개되었으며, 제조사는 이를 교정용 브라켓 접착, 소아 환자의 치료에 사용하도록 추천하고 있다. 이러한 짧은 중합시간은 타액 등으로 인한 오염이 일어나기 전에 적절한 중합이 필요한 소아 환자의 치면열구전색 치료에 유리할 것이다. | |
치면열구전색의 특징은 무엇인가? | 치면열구전색은 구치부 교합면 열구우식을 예방하는 효과적 방법으로 침습적인 수복 치료의 필요성을 줄이고, 초기우식의 진행을 정지시킬 수 있다[1-4]. | |
광중합 레진 전색제의 부적절한 중합의 단점은 무엇인가? | 광중합 레진 전색제가 치면열구전색에 주로 사용되고 있으며, 전색제의 충분한 중합은 재료의 장기간 유지 및 임상적 성공을 위한 전제 조건이다[5]. 레진 재료의 부적절한 중합은 레진 단량체의 고분자 변환의 양을 감소시켜 단량체의 침출로 인한 세포독성을 증가시키며, 결합강도와 변연 적합도 등의 기계적 성질을 악화시킨다[6,7]. |
Simonsen RJ : Retention and effectiveness of dental sealants after 15 years. J Am Dent Assoc, 122:34-42, 1991.
Primosch RE, Barr ES : Sealant use and placement techniques among pediatric dentists. J Am Dent Assoc, 132:1442-1451, 2001.
Mertz-Fairhurst EJ, Curtis JW Jr, Adair SM, et al. : Ultraconservative and cariostatic sealed restorations: results at year 10. J Am Dent Assoc, 129:55-66, 1998.
Beauchamp J, Caufield PW, Simonsen R, et al. : Evidencebased clinical recommendations for the use of pit-and-fissure sealants: a report of the American Dental Association Council on Scientific Affairs. Dent Clin North Am, 53:131-147, 2009.
Thome T, Steagall W Jr, Turbino ML, et al. : Influence of the distance of the curing light source and composite shade on hardness of two composites. J Appl Oral Sci, 15:486-491, 2007.
Aranha AM, Giro EM, Costa CA, et al. : Effects of lightcuring time on the cytotoxicity of a restorative composite resin on odontoblast-like cells. J Appl Oral Sci, 18:461-466, 2010.
Vandewalle KS, Ferracane JL, Sakaguchi RL, et al. : Effect of energy density on properties and marginal integrity of posterior resin composite restorations. Dent Mater, 20:96-106, 2004.
Yap AU, Seneviratne C : Influence of light energy density on effectiveness of composite cure. Oper Dent, 26:460-466, 2001.
Platt JA, Clark H, Moore BK : Curing of pit & fissure sealants using light emitting diode curing units. Oper Dent, 30:764-771, 2005.
Hume WR, Gerzina TM : Bioavailability of components of resin-based materials which are applied to teeth. Crit Rev Oral Bio Med, 7:172-179, 1996.
Xu X, Sandras DA, Burgess JO : Shear bond strength with increasing light-guide distance from dentin. J Esthet Restor Dent, 18:19-27, 2006.
International Organization for Standardization. ISO 6874: 2015 (E) Dental resin-based pit and fissure sealants.
Covey DA, Johnson WW, Hopper LR : Penetration of various pit and fissure sealants into occlusal grooves. J Dent Res, 83 Abstract 3471, 2004.
Cho J, Kim DK : Study on the shape and depth of the occlusal central fissure in permanent molar teeth. J Korean Dent Assoc, 27:959-964, 1989.
Torno V, Soares P, Vieira S, et al. : Effects of irradiance, wavelength, and thermal emission of different light curing units on the Knoop and Vickers hardness of a composite resin. J Biomed Mater Res B Appl Biomater, 85:166-171, 2008.
Ferracane JL : Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resin. Dent Mater, 1:11-14, 1985.
Rueggeberg FA, Caughman WF, Curtis JW Jr : Effect of light intensity and exposure duration on cure of resin composite. Oper Dent, 19:26-32, 1994.
Silikas N, Eliades G, Watts DC : Light intensity effects on resin-composite degree of conversion and shrinkage strain. Dent Mater, 16:292-296, 2000.
Rueggeberg FA, Caughman WF, Curits JW Jr, Davis HC : Factors effecting cure at depth within light activated resin composites. Am J Dent, 6:91-95, 1993.
Price RB, Felix CA, Andreou P : Knoop hardness of ten resin composites irradiated with high-power LED and quartztungsten-halogen lights. Biomaterials, 26:2631-2641, 2005.
Uhl A, Mills RW, Jandt KD : Photoinitiator dependent composite depth of cure and Knoop hardness with halogen and LED light curing units. Biomaterials, 24:1787-1795, 2003.
Kitchens B, Wells M, Tantbirojn D, Versluis A : Depth of cure of sealants polymerized with high-power light emitting diode curing lights. Int J Paediatr Dent, 25:79-86, 2015.
Sobrinho LC, de Lima AA, Knowles JC, et al. : Influence of curing tip distance on composite Knoop hardness values. Braz Dent J, 11:11-17, 2000.
Kim JW, Jang KT, Garcia-Godoy F, et al. : Effect of curing method and curing time on the microhardness and wear of pit and fissure sealants. Dent Mater, 18:120-127, 2002.
Aguiar FH, Braceiro A, Lovadino JR, et al. : Effect of light curing modes and light curing time on the microhardness of a hybrid composite resin. J Contemp Dent Pract, 8:1-8, 2007.
Zach L, Cohen G : Pulp response to externally applied heat. Oral Surg Oral Med Oral Pathol, 19:515-530, 1965.
Cantekin K, Buyuk SK, Demirbuga S, et al. : Pulp chamber temperature increase from curing light units: an in vitro study. J Dent Child (chic), 81:128-132, 2014.
Mehl A, Hickel R, Kunzelmann KH : Physical properties and gap formation of light-cured composites with and without softstart-polymerization. J Dent, 25:321-330, 1997.
Seo HW, Park HW : A study of monomer release from pit and fissure sealants according to various light sources. J Korean Acad Pediatr Dent, 32:284-292, 2005.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.