최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한치과기공학회지 = The Journal of Korean Academy of Dental Technology, v.41 no.3, 2019년, pp.203 - 209
김재홍 (부산가톨릭대학교 보건과학대학 치기공학과) , 김기백 (대전보건대학교 치기공과)
Purpose: The purpose of this study was to investigate the mechanical properties of polymer prosthetic and restorative materials for dental CAD/CAM using two test method; surface characteristics and shear bond strength. Methods: Commercialized CAD/CAM polymer blanks were investigated; One kinds of PM...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Polyaryletherketone(PAEK)족은 무엇인가? | Polyaryletherketone(PAEK)족은 benzene 고리인 aryl 기와, ether 기, ketone 기로 구성되어 있으며(Gardner et al, 1992), 치과용 재료로서 다양한 장점을 갖고 있다. 고성능 열가소성 플라스틱 생체친화적인 재료로 인간의 뼈를 대체할 가장 적합한 재료라고 알려져 있다. | |
PAEK의 종류와 그들의 특징은 무엇인가? | PAEK의 일종으로 polyetheretherketone(PEEK)와 polyetherketoneketone(PEKK)이 있으며 이 중 PEKK는 polyetherketone(PEK)이나 PEEK보다 높은 굴곡 및 인장 강도, 표면 경도를 가지는 등의 우수한 물리적 특성을 보인다. 치과 분야에서 PEKK는 고정성 보철물, 어태치먼트, 포스트, 교합안정장치, 임시 임플란트 지대주(Zoidis et al, 2016), 가철성 보철물의 구조물(Tannous et al, 2012)등으로 사용될 수 있다. | |
polymethylmethacrylate(PMMA)가 가지고 있는 문제점에는 어떤 것들이 있는가? | 또한 다양한 수복재료로 임시의치, 의치상 제작, 임플란트 상부구조, 악관절 환자들을 위한 splint 등 광범위하게 사용되고 있다. 하지만 중합수축과 의치상 레진의 수분흡수, 열팽창에 따른 체적변화, 낮은 마모성과 강도, 변색, 미반응 단량체에 대한 알러지 반응 등의 문제점이 지적되고 있다(Noh et al, 2008). 이러한 PMMA 뿐 아니라 최근 치과용 computer-aided design / computer-aided manufacturing(CAD/CAM)의 기술과 보급의 증가에 따라 기계적 성질이 좋은 열가소성 Polyaryletherketones(PAEK) 계열의 재료들도 개발되어 치과에도 활용 가능하게 되었다. |
Aguilar-Mendoza, J.A., Rosales-Leal, J.I., Rodriguez-Valverde, M.A., Gonzalez-Lopez, S., Cabrerizo-Vilchez, M.A.. Wettability and bonding of self-etching dental adhesives. Dental materials, vol.24, no.7, 994-1000.
Beuer, Florian, Steff, Bastian, Naumann, Michael, Sorensen, John A.. Load-bearing capacity of all-ceramic three-unit fixed partial dentures with different computer-aided design (CAD)/computer-aided manufacturing (CAM) fabricated framework materials. European journal of oral sciences, vol.116, no.4, 381-386.
Değer, S., Şermet, B., Cömert, Z., Bultan, Ö.. Effect of Different Surface Treatments on the Surface Roughness and Hardness of Dental Porcelain. Key engineering materials, vol.264, 2123-2130.
Denry, I., Kelly, J.R.. Emerging Ceramic-based Materials for Dentistry. Journal of dental research, vol.93, no.12, 1235-1242.
Dundar M, Ozcan M, Comlekoglu E, Gungor MA, Artunc C. Bond strengths of veneering ceramics to reinforced ceramic core materials. Int J Prosthodont. 2005;18(1):348-355.
El Zohairy, Ahmed A, De Gee, Anton J, Mohsen, Mohamed M, Feilzer, Albert J. Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dental materials, vol.19, no.7, 575-583.
Faltermeier, Andreas, Rosentritt, Martin, Müssig, Dieter. Acrylic removable appliances: Comparative evaluation of different postpolymerization methods. American journal of orthodontics and dentofacial orthopedics, vol.131, no.3, 301.e16-301.e22.
Fuhrmann, G., Steiner, M., Freitag-Wolf, S., Kern, M.. Resin bonding to three types of polyaryletherketones (PAEKs)-Durability and influence of surface conditioning. Dental materials, vol.30, no.3, 357-363.
Gardner, K.H., Hsiao, B.S., Matheson, R.R., Wood, B.A.. Structure, crystallization and morphology of poly (aryl ether ketone ketone). Polymer, vol.33, no.12, 2483-2495.
Geringer, J., Tatkiewicz, W., Rouchouse, G.. Wear behavior of PAEK, poly(aryl-ether-ketone), under physiological conditions, outlooks for performing these materials in the field of hip prosthesis. Wear: An international journal on the science and technology of friction, lubrication and wear, vol.271, no.11, 2793-2803.
Noh HS, Kim JM, Kim S, Jeong TS. Effect of curing conditions on the monomer elution of orthodontic acrylic resin. J Korean Acad Pediatric Dent. 2008;35(3):477-484.
Stawarczyk, Bogna, Beuer, Florian, Wimmer, Timea, Jahn, Dirk, Sener, Beatrice, Roos, Malgorzata, Schmidlin, Patrick R.. Polyetheretherketone—A suitable material for fixed dental prostheses?. Journal of biomedical materials research. Part B, Applied biomaterials, vol.101, no.7, 1209-1216.
Spencer, Paulette, Ye, Qiang, Park, Jonggu, Topp, Elizabeth M., Misra, Anil, Marangos, Orestes, Wang, Yong, Bohaty, Brenda S., Singh, Viraj, Sene, Fabio, Eslick, John, Camarda, Kyle, Katz, J. Lawrence. Adhesive/Dentin Interface: The Weak Link in the Composite Restoration. Annals of biomedical engineering, vol.38, no.6, 1989-2003.
Tannous, Fahed, Steiner, Martin, Shahin, Ramez, Kern, Matthias. Retentive forces and fatigue resistance of thermoplastic resin clasps. Dental materials, vol.28, no.3, 273-278.
Uhrenbacher, J., Schmidlin, P.R., Keul, C., Eichberger, M., Roos, M., Gernet, W., Stawarczyk, B.. The effect of surface modification on the retention strength of polyetheretherketone crowns adhesively bonded to dentin abutments. The Journal of prosthetic dentistry, vol.112, no.6, 1489-1497.
Zoidis, P., Papathanasiou, I.. Modified PEEK resin-bonded fixed dental prosthesis as an interim restoration after implant placement. The Journal of prosthetic dentistry, vol.116, no.5, 637-641.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.