최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.11, 2020년, pp.42 - 48
김정길 (한국생산기술연구원 지능형농기계연구그룹) , 박진선 (한국생산기술연구원 지능형농기계연구그룹) , 최규정 (한국생산기술연구원 지능형농기계연구그룹) , 이동근 (한국생산기술연구원 지능형농기계연구그룹) , 신민석 (한국생산기술연구원 안전시스템연구그룹) , 오주영 (한국생산기술연구원 안전시스템연구그룹) , 남주석 (강원대학교 바이오시스템기계공학전공)
The agricultural tractor is a multi-purpose vehicle, which is frequently used in the agricultural field. It must be highly reliable in terms of human safety. Design and analysis of agricultural tractors must be performed using actual agricultural workload to maintain high reliability. Additionally, ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Gerlach, A., "Field Measurement of Tractor Transmission Forces," Transactions of ASAE, Vol. 9, No. 5, pp. 707-712, 1966.
Lee, J. S., Yu, H. Y., Lee, G. T. and Kim, D. C., "Analysis of Load Spectrum of 70kW class Tractor for Plowing Operation," Journal of Agriculture and Life Sciences, Vol. 45, No. 1, pp. 18-22, 2014.
Kim, J. H., Kim, K. U., Choi, C. W. and Wu, Y. G., "Severeness of Transmission Loads of Agricultural Tractors," Journal of Biosystems Engineering, Vol. 23, No. 5, pp. 417-426, 1998.
Park, Y. J., Lee, G. H., Nam, Y. Y. and Kim J. G., "Influence of Flexible Pin for Planets on Service Life of Wind Turbine Gearboxes," Transactions of the Korean Society of Mechanical Engineerings-A, Vol. 36, No. 9, pp. 953-960, 2012.
Park, Y. J., Kim, J. G., Lee, G. H., Kim, Y. J. and Oh, J. Y., "Effects of Bearing Characteristic on Load Distribution and Sharing of Pitch Reducer for Wind Turbine," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 1, pp. 55-65, 2016.
International Electrotechnical Commission (IEC), "Wind Turbines-Part 4: Design Requirements for Wind Turbine Gearboxes," IEC 61400-4, 2012.
International Organization for Standardization (ISO), "Calculation of load capacity of spur and helical gears," ISO 6336, 2007.
International Organization for Standardization (ISO), "Cylindrical gears - ISO system of accuracy," ISO 1328, 1995.
KIMM, "HST for agricultural tractor transmission," RS B 0045, 2008.
International Organization for Standardization (ISO), "Calculation of Load Capacity of Bevel Gears," ISO 10300, 2001.
German Institute for Standardization(DIN), "Shafts and axles, calculation of load capacity," DIN 743, 2012.
International Organization for Standardization (ISO), "Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings," ISO/TS 16281, 2008.
Germanischer Lloyd WindEnergie GmbH(GL), "Guideline for the Certification of Wind Turbines", GL Wind 2003, 2003.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.