최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Architectural research, v.22 no.1, 2020년, pp.33 - 39
Lee, Chang-Yong (Department of Architecture Engineering, Hanbat National University) , Kim, Seung-Hun (Department of Architecture Engineering, Hanbat National University) , Lee, Yong-Taeg (Department of Architecture Engineering, Hanbat National University)
In this study, side-face blowout failure strength of high strength headed reinforcing bar, which is vertically anchoring between RC or SFRC members, is evaluated throughout pullout test. The major test parameters are content ratio of high strength steel fibers, strength of rebar, length of anchorage...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
ACI (2002). "Code requirements for nuclear safety related concrete structures." American Concrete Institute, ACI 352-02.
ACI (2007). "Code requirements for nuclear safety related concrete structures." American Concrete Institute, ACI349-07.
B. I. Bae, J. H. Chung, H. K. Choi, H. S. Jung, & C. S. Choi (2018). "Experimental study on the cyclic behavior of steel fiber reinforced high strength concrete columns and evaluation of shear strength." Engineering Structures, 157: 250-267.
B. H. AbdelAleem, & A. A.A. Hassan (2019). "Effect of combining steel fibers with crumb rubber on enhancing the behavior of beam-column joints under cyclic loading." Engineering Structures, 182: 510-527.
C. C. Hung, & C. Y. Chueh (2016). "Cyclic behavior of UHPFRC flexural members reinforced with high strength steel rebar." Engineering Structures, 122: 108-120.
C. G. Berrocal, I. Lofgren, & K. Lundgren (2018). "The effect of fibres on steel bar corrosion and flexural behaviour of corroded RC beams." Engineering Structures, 163: 409-425.
F. Delhomme, G. Debicki, & Z. Chaib (2010). "Experimental behaviour of anchor bolts under pullout and relaxation tests." Construction and Building Materials, 24: 266-274.
H. J. Sim, & S. C. Chun (2018). "A reevaluation of anchorage strength of headed reinforcing bars in exterior beam-column joints." Journal of the Korea Concrete Institute, 30: 207-216.
J. Wang, J. Qi, T. Tong, Q. Xu, & H. Xiu (2019). "Static behavior of large stud shear connectors in steel-UHPC composite structures." Engineering Structures, 178: 534-542.
KCI (2012). "Korean concrete structure Code." Korea Concrete Institute, KCI 2012.
KCI (2017). "KCI Model Code 2017." Korea Concrete Institute, KCI-M-18-006.
K. N. Chi, C. K. Chiu, & K. C. Lin (2018). "Study on straight development length of tensile threaded bars in high strength reinforced concrete members." Construction and Building Materials, 183: 661-674.
L. Hou, B. Zhou, S. Guo, N. Zhuang, & D. Chen (2018). "Bondslip behavior between pre-corroded rebar and steel fiber reinforced concrete." Construction and Building Materials, 182: 637-645.
M. Pourbaba, E. Asefi, H Sadaghian, & A. Mirmiran (2018). "Effect of age on the compressive strength of ultra-highperformance fiber-reinforced concrete." Construction and Building Materials, 175: 402-410.
M. Toth, B. Bokor, & A. Sharma (2019). "Anchorage in steel fiber reinforced concrete-concept, experimental evidence and design recommendations for concrete cone and concrete edge breakout failure modes." Engineering Structures, 181: 60-75.
M. Weglorz (2017). "Influence of headed anchor group layout on concrete failure in tension." Procedia Engineering, 193:242-249.
N. D. Tung, & N. V. Tue (2018). "Shear resistance of steel fiberreinforced concrete beams without conventional shear reinforcement on the basis of the critical shear band concept." Engineering Structures, 168: 698-707.
S. Gali, & K. Subramaniam (2017). "Investigation of the dilatant behavior of cracks in the shear response of steel fiber reinforced concrete beams." Engineering Structures, 152:832-842.
S. J. Jang, & H. D. Yun (2018). "Combined effects of steel fiber and coarse aggregate size on the compressive and flexural toughness of high strength concrete." Engineering Structures, 185: 203-211.
S. Yilmaz, M. A. Ozen, & Y. Yardim (2013). "Tensile behavior of post-installed chemical anchors embedded to low strength concrete." Construction and Building Materials, 47: 861-866.
S. Y. Seo, B. R. Nam, & S. K. Kim (2016). "Tensile strength of the grout-filled head-splice-sleeve." Construction and Building Materials, 124: 155-166.
Z. M. Yaseen, M. T. Tran, S. W. Kim, T. Bakhshpoori, & R. C. Deo (2018). "Shear strength prediction of steel fiber reinforced concrete beam using hybrid intelligence models: A new approach." Engineering Structures, 177: 244-255.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.