최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기마이크로전자 및 패키징 학회지 = Journal of the Microelectronics and Packaging Society, v.27 no.4, 2020년, pp.127 - 133
하윤근 (부산대학교 재료공학부) , 심준형 (부산대학교 재료공학부) , 백주환 (부산대학교 재료공학부) , 김민균 (부산대학교 재료공학부) , 조영래 (부산대학교 재료공학부)
It is important to measure the quantitative adhesive strength between an organic adhesive and a metal adherend. In measuring the adhesive strength between an organic adhesive and a metal adherend, the effect of the kind and thickness of the adherend on the adhesive strength was studied. Two kinds of...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
S. W. Lee, J. W. Park, C. H. Park, and H. J. Kim, "Enhanced Optical Properties and Thermal Stability of Optically Clear Adhesives", Int. J. Adhes. Adhes., 50, 93 (2014).
K. Y. Kang and J. M. Lee, "Experimental Study on Evaluation of Bonding Strength of Adhesively Bonded Joints by Adhesive", Journal of KWJS, 30(6), 545 (2012).
M. S. Kim, H. Y. Kim, S. H. Yoo, J. H. Kim, and J. K. Kim, "Effect of Curing Agent on the Curing Behavior and Joint Strength of Epoxy Adhesive", Journal of KWJS, 29(4), 416 (2011).
M. Y. Shon, Effects of Residual White Rust of Inorganic Zinc Silicate Primer on Corrosion Protection of Epoxy-Coated Carbon Steel", J. Ind. Eng. Chem., 16, 523 (2010).
S. B. Lyon, R. Bingham, and D. J. Mills, "Advances in Corrosion Protection by Organic Coatings: What We Know and What We Would Like to Know", Pro. Org. Coat., 102, 2 (2017).
J. Schulz, F. Vennemann, and G. Nothacker, "Zn-Mg-Al HotDip Galvanized Coatingd for Exposed Parts on the Automotive Industry", Proc. 10th International Conference on Zinc and Zinc Alloy Coated Steel., Toronto, Ontario, Galvatech, AIST, 153 (2015).
S. Khoee and Z. Kachoei, "Design and Development of Novel Reactive Amine Nanocontainers for a Self-Healing Epoxy Adhesive: Self-Repairing Investigation using the Lap Shear Test", RCS Adv., 5, 21023 (2015).
B. I. Noh, J. B. Lee, S. H. Won, and S. B. Jung, "Characteristics of Reliability for Flip Chip Package with Non-conductive paste", J. Microelectron. Packag. Soc., 14(4), 9 (2007).
D. J. KIm, D. H. Lee, J. M. Koo, S. J. Song, C. S, Seok, and M. Y. Kim, "Evaluation of Bond Strength of Isothermally Aged Plasma Sprayed Thermal Barrier Coating", Trans. Korean Soc. Mech. Eng., A32(7), 569 (2008).
M. Y. Shon, J. H. Kim, and J. H. Kim, "Experimental Examination for Effect of Voids on Bonding Performance in Cryogenic Temperature Condition", Composites Research, 22(2), 14 (2009).
D. Rahmatabadi, M. Tayyebi, A, Sheikhi, and R. Hashemi, "Fracture Toughness Investigation of Al1050/Cu/MgAZ31ZB Multi-Layered Composite Produced by Accumulative Roll Bonding Process", Mater. Sci. Eng., A734, 427 (2018).
S. Yoon, J. F. Tu, J. H. Lee, G. E. Yang, and S. D. Mun, "Effect of the Magnetic Pole Arrangement on the Surface Roughness of STS 304 by Magnetic Abrasive Machining", Int. J. Precis. Eng. Manuf., 15(7), 1275 (2014).
S. Chataigner, J. F. Caron, K. Benzarti, M. Quiertant, and C. Aubagnac, "Use of a Single Lap Shear Test to Characterize Composite-to-Concrete or Composite-to-Steel Bonded Interfaces", Construct. Build Mater., 25, 468 (2011).
D. Astm, "4541 Standard Test Method for Pull-Off Strength of Coatings using Portable Adhesion Tester", Annual Book of ASTM Standards, pp.1-13, ASTM International (2002).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.