최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기공업화학 = Applied chemistry for engineering, v.31 no.1, 2020년, pp.49 - 56
이예진 (동국대학교 화공생물공학과) , 박기호 (동국대학교 화공생물공학과) , 임종주 (동국대학교 화공생물공학과)
In this study, surface modification of CaCO3 nanoparticles by a silane coupling agent propyltrimethoxysilane (PTMS) was conducted and the effect of surface hydrophobicity on the stability of foam and emulsion was studied in order to test the potential applicability as a foam stabilizer or an emulsif...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
CaCO3 나노입자가 가진 단점은? | CaCO3 (calcium carbonate, 탄산칼슘) 나노입자는 상업용 나노입자 중 가격이 저렴하고 생산이 쉬워 여러 산업 분야에서 널리 사용되는 첨가제로 고분자, 윤활제, 고무, 화장품, 페인트, 식품 등에 이용되며, 특히 플라스틱의 기계적 물성을 강화시키는 필러(filler)로 널리 사용 되고 있다[1,2]. 그러나 CaCO3 나노입자는 표면 자유 에너지가 높아서 친수성이 매우 크다는 특성을 가지고 있기 때문에 다양한 조건에 서 널리 활용되기 어렵다는 문제점을 갖고 있어서 CaCO3 표면을 소수화하기 위한 많은 연구들이 진행되어 왔다[1-20]. | |
실란 커플링제 PTMS를 사용하여 CaCO3 나노입자의 표면을 친수성에서 소수성으로 개질하여 기포 및 에멀젼 안정화제로서의 적용성을 시험하고자 한 실험 결과, 어떤 분석을 통해 PTMS가 나노입자 표면에 성공적으로 결합된것을 확인하였나? | 본 연구에서는 실란 커플링제 PTMS를 사용하여 CaCO3 나노입자의 표면을 친수성에서 소수성으로 개질하였으며, 개질된 CaCO3 나노입자를 기포 및 에멀젼 안정화제로의 적용 가능성을 시험하고자 나노입자 표면의 소수성 변화가 기포와 에멀젼의 안정성에 미치는 영향에 관하여 살펴보았다. PTMS에 의한 CaCO3 나노입자의 표면 개질은 FT-IR, TGA, DSC, XRD 및 XPS 분석을 통하여 PTMS가 나노입자 표면에 성공적으로 결합되었음을 확인하였다. 또한 부상 시험 및 접 촉각 측정을 통하여 PTMS 농도 증가에 따라 CaCO3 나노입자 표면의 소수성이 증가하며, PTMS 농도 5 wt% 조건에서 active ratio와 접촉 각이 각각 93. | |
CaCO3는 어디에 주로 쓰이는가? | CaCO3 (calcium carbonate, 탄산칼슘) 나노입자는 상업용 나노입자 중 가격이 저렴하고 생산이 쉬워 여러 산업 분야에서 널리 사용되는 첨가제로 고분자, 윤활제, 고무, 화장품, 페인트, 식품 등에 이용되며, 특히 플라스틱의 기계적 물성을 강화시키는 필러(filler)로 널리 사용 되고 있다[1,2]. 그러나 CaCO3 나노입자는 표면 자유 에너지가 높아서 친수성이 매우 크다는 특성을 가지고 있기 때문에 다양한 조건에 서 널리 활용되기 어렵다는 문제점을 갖고 있어서 CaCO3 표면을 소수화하기 위한 많은 연구들이 진행되어 왔다[1-20]. |
Z. G. Cui, Y. Z Cui, C. F Cui, Z. Chen, and B. P. Binks, Aqueous foams stabilized by in situ surface activation of $CaCO_3$ nano particles via adsorption of anionic surfactant, Langmuir, 26, 12567-12574 (2010).
K. Premphet and P. Horanont, Phase structure of ternary polypropylene/elastomer/filler composites: Effect of elastomer polarity, Polymer, 41, 9283-9290 (2000).
C. Wang, Y. Sheng, H. Bala, X. Zhao, J. Zhao, X. Ma, and Z. Wang, A novel aqueous-phase route to synthesize hydrophobic $CaCO_3$ particles in situ, Mater. Sci. Eng. C, 27, 42-45 (2007).
M. A. Osman and U. W. Suter, Surface treatment of calcite with fatty acids: Structure and properties of the organic monolayer, Chem. Mater., 14, 4408-4415 (2002).
S. Mihajlovic, A. Dakovic, Z. Sekulic, V. Jovanovic, and D. Vucinic, Influence of the modification method on the surface adsorption of stearic acid by natural calcite, J. Serb. Chem. Soc., 67, 1-19 (2009).
Z. Demjen, B. Pukanszky, and J. Nagy, Possible coupling reactions of functional silanes and polypropylene, Polymer, 40, 1763-1773 (1999).
E. Fekete and B. Pukanszky, Surface coverage and its determination: Role of acid-base interactions in the surface treatment of mineral fillers, J. Colloid Interface Sci., 194, 269-275 (1997).
G. S. Deshmukh, S. U. Pathak, D. R. Peshwe and J. D. Ekhe, Effect of uncoated calcium carbonate and stearic acid coated calcium carbonate on mechanical, thermal and structural properties of poly(butylene terephthalate) (PBT)/calcium carbonate composites, Bull. Mater. Sci., 33, 277-284 (2010).
Y. Yin and X. Wang, Wet surface modification of light calcium carbonate powder by aluminate coupling agent, Adv. Mater. Res., 79-82, 1967-1970 (2009).
J. Liao, G. Du, X. Qiao, and D. Hao, Surface modification of diatomite by stearic acid and its effects on reinforcing for natural rubber/styrene butadiene rubber blend, J. Chin. Ceram. Soc., 39, 641-645 (2011).
K. Esumi and M. Ueno, Structure-performance Relationships in Surfactant, Marcel Dekker, New York (1997).
I. Grosse and K. Estel, Thin surfactant layers at the solid interface, Colloid Polym. Sci., 278, 1000-1006 (2000).
F. Tiberg, J. Brinck, and L. Grant, Adsorption and surface-induced self-assembly of surfactants at the solid-aqueous interface, Curr. Opin. Colloid Interface Sci., 4, 411-419 (1999).
P. Somasundaran and L. Huang, Adsorption/aggregation of surfactants and their mixtures at solid-liquid interfaces, Adv. Colloid Interface Sci., 88, 179-208 (2000).
E. M. Song, D. W. Kim, B. J. Kim, and J. C. Lim, Surface modification of $CaCO_3$ nanoparticles by alkylbenzene sulfonic acid surfactant, Colloids Surf. A, 461, 1-10 (2014).
E. M. Song, D. W. Kim, and J. C. Lim, Effect of adsorption of laureth sulfonic acid type anionic surfactant on the wetting property of $CaCO_3$ substrate, J. Ind. Eng. Chem., 28, 351-358 (2015).
D. W. Kim, J. Y. Lee, S. M. Lee, and J. C. Lim, Surface modification of calcium carbonate nanoparticles by fluorosurfactant, Colloids Surf. A, 536, 213-223 (2018).
J. Y. Lee, S. H. Jo, and J. C. Lim, Effect of surface modification of $CaCO_3$ nanoparticles by a silane coupling agent methyltrimethoxysilane on the stability of foam and emulsion, J. Ind. Eng. Chem., 74, 63-70 (2019).
Z. Y. Yang, Y. J. Tang, and J. H. Zhang, Surface modification of $CaCO_3$ nanoparticles with silane coupling agent for improvement of the interfacial compatibility with styrene-butadiene rubber (SBR) latex,, Chalcogenide Lett., 10, 131-141 (2013).
N. Shimpi, A. Mali, D. P. Hansora, and S. Mishra, Synthesis and surface modification of calcium carbonate nanoparticles using ultrasound cavitation technique, Nanosci. Nanoeng., 3, 8-12 (2015).
S. Mishra, A. Chatterjee, and R. Singh, Novel synthesis of nanocalcium carbonate ( $CaCO_3$ )/polystyrene(PS) core-shell nanoparticles by atomized microemulsion technique and its effect on properties of polypropylene(PP) composites, Polym. Adv. Technol., 22, 2571-2582 (2011).
E. Mavropoulos, A. M. Costa, L. T. Costa, C. A. Achete, A. M., J. M. Granjeiro, and A. M. Rossi, Adsorption and bioactivity studies of albumin onto hydroxyapatite surface, Colloids Surf. B, 83, 1-9 (2011).
S. Ghosh, S. K. Goswami, and L. J. Mathias, Surface modification of nano-silica with amides and imides for use in polyester nanocomposites, J. Mater. Chem. A, 1, 6073-6080 (2013).
S. Ek, A. Root, M. Peussa, and L. Niinisto, Determination of the hydroxyl group content in silica by thermogravimetry and a comparison with 1H MAS NMR results, Thermochim. Acta, 379, 201-212 (2001).
B. P. Binks and S. O. Lumsdon, Influence of particle wettability on the type and stability of surfactant-free emulsions, Langmuir, 16, 8622-8631 (2000).
B. P. Binks and J. A. Rodrigues, Double inversion of emulsions by using nanoparticles and a di-chain surfactant, Angew. Chem. Int. Ed., 46, 5389-5392 (2007).
D. E. Tambe and M. M. Sharma, Factors controlling the stability of colloid-stabilized emulsions: I. An experimental investigation, J. Colloid Interface Sci., 157, 244-253 (1993).
Z. G. Cui, C. F. Cui, Y. Zhu, and B. P. Binks, Multiple phase inversion of emulsions stabilized by in situ surface activation of $CaCO_3$ nanoparticles via adsorption of fatty acids, Langmuir, 28, 314-320 (2012).
B. P. Binks, Particles as surfactants-similarities and differences, Curr. Opin. Colloid Interface Sci., 7, 21-41 (2002).
E. Rio, W. Drenckhan, A. Salonen, and D. Langevin, Unusually stable liquid foams, Adv. Colloid Interface Sci., 205, 74-86 (2014).
P. D. I. Fletcher, and B. L. Holt, Controlled silanization of silica nanoparticles to stabilize foams, climbing films, and liquid marbles, Langmuir, 27, 12869-12876 (2011).
U. T. Gonzenbach, A. R. Studart, E. Tervoort, and L. J. Gauckler, Ultrastable particle-stabilized foams, Angew. Chem. Int. Ed., 45, 3526-3530 (2006).
B. P. Binks and T. S. Horozov, Aqueous foams stabilized solely by silica nanoparticles, Angew. Chem. Int. Ed., 117, 3788-3791 (2005).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.