최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국광학회지 = Korean journal of optics and photonics, v.31 no.2, 2020년, pp.81 - 87
This study examines the design technology of searchlight optics featuring narrow beam angles and high luminous intensities. Halogen and xenon lamps, which are conventional searchlight sources, are vulnerable to vibration and shock, and are large and heavy, making them difficult to transport. In addi...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
플라스틱 사출 시 형상 오차에 대한 예측이 필수적인 이유는 무엇인가? | 플라스틱은 유리 등의 재질에 비해 열변형이 심하므로 높은 치수정밀도를 내기 어려울 뿐 아니라 공정 변수가 많아 사출 조건을 제어하는데 많은 어려움이 있다. 특히 렌즈는 성능과 직결되는 표면 형상의 정밀한 제어가 요구되므로 사출 조건 결정에 따라 상당한 시간과 경험이 요구된다. 따라서 플라스틱 광학계의 제작을 위해서는 사출 시 형상 오차에 대한 예측이 필수적이다. | |
탐조등이란 무엇인가? | 탐조등은 해안, 선박, 항공 등에 설치되어 재난방지 및 인명 구조 시 탐색용으로 사용되는 대표적인 특수조명이다. 항상 동작 상태를 유지하는 것이 아니라 긴급 상황 시 불규칙적으로 사용되므로 높은 내구성을 요구한다[1]. | |
탐조등의 광학적 성능은 어떠한 특성을 가지는가? | 탐조등의 광학적 성능은 중심광도 및 1 lux의 빛이 도달하는 거리로 나타내며 광 출력이 클수록, 지향각이 작을수록 광달 거리가 긴 특성을 가진다[3]. 이러한 광학적 성능에 관한 KS V 8469 국방 규격을 표 1에 나타내었다. |
S. J. Kim, "A study on the design of a high power LED searchlight," M.S. Thesis, Korea Maritime & Ocean University, Busan (2014).
T. S. Kim, "Design and fabrication of an LED searchlight for naval vessels," M.S. Thesis, Korea Maritime & Ocean University, Busan (2016).
A. R. Lee, "Study on thermal properties of high-power LED searchlight," M.S. Thesis, Pukyong National University, Busan (2014).
J. S. Lee, Y. J. Jo, H. H. Lee, M. S. Kong, D. H. Kang, and M. S. Jung, "A study of lens design technique for proximity exposure using a UVA LED," Korean J. Opt. Photon. 30, 146-153 (2019).
H. C. Song, "A study on the thermal radiation of 50 W COB LED module for high efficiency LED lighting," M.S. Thesis, Chonbuk National University, Jeon-ju (2016).
J. S. Yang, "Study on design method of a LED lens with a single or multiple freeform surfaces for improving its luminous flux efficiency," Doc. Dissertation, Inha University, Incheon (2017).
T. S. Kwak, H. Ohmori, and W. B. Bae, "A study on searching method of molding condition to control the thickness reduction of optical lens in plastic injection molding process," J. Korean Soc. Precision Eng. 21, 27-34 (2004).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.