[논문]건설현장의 추락재해 감소를 위한 스마트 안전장비를 활용한 USN 활용 안전관리의 적용에 관한 연구

남욱진

doi:10.14346/jkosos.2020.35.6.46

건설현장의 추락재해 감소를 위한 스마트 안전장비를 활용한 USN 활용 안전관리의 적용에 관한 연구
The Study on the Application of the Safety Management Utilizing USN Using Smart Safety Equipment to Reduce Falling Accident on Construction Sites 원문보기

한국안전학회지 = Journal of the Korean Society of Safety, v.35 no.6, 2020년, pp.46 - 53

남욱진 (경상대학교 건축공학과)

Abstract ▼ AI-Helper

The domestic construction industry is becoming larger, high-rise and specialized. However, safety consciousness is still staying in low levels and falling accidents are apt to rise compared to other industries. So, the new way of safety management is required for reducing of the construction falling accidents. In this paper, we evaluate appropriateness of safety management on construction sites utilizing USN using smart safery equipment. Thus, we calculate loss costs of falling accidents considering accident rates and costs of the USN using smart safery equipment installation then compare both calculated costs. This research aims to propose the method for reduction of construction accidents in addition to conventional safety control methods by analyzing the propriety of applying USN using smart safery equipment on construction sites.

주제어

표/그림 (9)

표 Table 1. Preceding research analysis
그림 Fig. 1. Network architecture.
표 Table 2. Procedure for analyzing the adequacy of the cost of the fall disaster and the cost of building the USN
표 Table 3. Selection of example sites
그림 Fig. 2. Sensor installation location and network.
표 Table 4. Calculation of the loss cost of a fall accident considering the accident rate
표 Table 5. Cost of building a USN site Unit : Ten thousand won
표 Table 6. Economic feasibility analysis of USN site construction Unit : Ten thousand won
그림 Fig. 3. Application and effectiveness of safety management through USN.

참고문헌 (24)

Ministry of Employment and Labor, Status of Industrial Accidents in 2019, 2020.
Ministry of Employment and Labor, Safety and Health Guidelines for Construction Sites in Summer and Rainy Season, 2011.
Ministry of Land, Infrastructure and Transport, Construction Safety Innovation Plan for 3 Major Projects to Protect National Life, 2020.
Ministry of Employment and Labor, Press Release, The Minister of Employment and Labor Urges Efforts to Settle the Site of the Revised Occupational Safety and Health Act and Reduce Deaths in the Construction Industry", 2020.
Ministry of Land, Infrastructure and Transport, Guidelines on the Prevention of Fall Accidents for Public Works in accordance with the Comprehensive Measures (4.11) for Fall Prevention at Construction Sites, 2019.
S. W. Jung, S. W. Kwon and C. H. Cho, "A Priority Analysis of Work Items in High-rise Construction for Adoption of USN Technology", Journal of the Architectural Institute of Korea(Structural System), Vol. 26. No. 5, pp. 117-124, 2010.
J. H. Lee, K. H. Park, S. H. Yun and J. H. Paek, "A Study the Reduction Plan of Construction Disaster Using RFID/USN Technology", Academic Conference Journal of the Architectural Institute of Korea, Vol. 26. No. 1, pp. 605-608, 2006.
K. T. Kim, "A Study on the Implementation of USN Technologies for Safety Management Monitoring of Architectural Construction Sites", Journal of the Korean Institute of Architectural Construction, Vol. 9. No. 4, pp. 103-109, 2009.
S. W. Kwon, "Ubiquitous Sensor Networks and RFID Technology in Construction Industry", Journal of the Architectural Institute of Korea, Vol. 50. No. 10, pp. 37-41, 2006.
J. H. Kim, W. K. Lee, H. H. Jo and K. I. Kang, "The Utility Test of the Device based on Hybrid Sensors Preventing Fall Accidents", Journal of the Architectural Institute of Korea(Structural System), Vol. 27. No. 1, pp. 753-756, 2007.
M.Adberrahim, E. Garcia, R. Diez and C. Balguer, "A Mechatronics Security System for the Construction Site", Automation in Construction, Vol. 14, No. 4, pp. 460-466, 2005.

상세보기
Y. B. Sa, "Analysis of the Cost of a Crash in the Domestic Construction Industry", Master's Thesis, Yonsei University, 2011.
T. Y. Lee, "An Assessment Method of Costs caused by Industrial Accidents", Ph.D. Thesis, Department of Safety Engineering, Pukyong National University, 2011.
G. W. Kim, "A Study on Development and Application of the Model to Calculate Costs of Loss due to Industrial Accidents", Ph. D. Thesis, Seoul National University of Science and Technology, 2018.
K. T. Kim, "A Fundamental Study on the Construction Safety Monitoring System Based on Ubiquitous Technology", Journal of the Architectural Institute of Korea(Structural system), Vol. 29. No. 1, pp. 681-684, 2009.
Y. I. Jeon, D. H. Kin, M. C. Lee, H. J. Baek and S.Y. Ko, The Introduction of the OSH Corporate Disclosure System - With the Focus on how to Estimating the Direct and Indirect Costs of Work Injuries, Safety and Health Agency Research Report, 2018.
Y. M. Kim, N. K. Choi and S. Y. Kim, "USN Service Revelation and Implementation based on Radio Frequency IDentification(REID)", Journal of the Korea Computer Science Conference, Vol. 32, No. 1(A), pp. 517-519, 2005.
S. W. Moon, B. Y. Choi, Y. E. Ji and K. J. Seo, "Application of Ubiquitous Sensor Network at Construction Sites", Korean Society for Construction Management Conference, pp. 905-908, 2007.
D. E. Kim, S. C. Lee and C. S. Kim, "Implementation of Underground space Monitoring System for Safety based on USN", Korean Multimedia Society Spring Conference, pp. 731-734, 2008.
W. Y. Son, National Technology Commercialization Information Network, Technology Marketing Report, 2010.
Ministry of Land, Infrastructure and Transport, Construction Technology Service and Construction Evaluation Guidelines, Notification No. 2019-636 of the Ministry of Land, Infrastructure and Transport, Attached Table 7, 2019.
Ministry of Employment and Labor, Construction labor ratio in 2019, Ministry of Employment and Labor Notification No. 2018-83, 2018.
Ministry of Employment and Labor, "Monthly Average Remuneration for the Construction Industry in 2019", Ministry of Employment and Labor Notification No. 2018-82, 2018.
X. Huang and J. Hinze, "Analysis of Construction Worker Fall Accidents", Journal of Construction Engineering and Management, M.ASCE, Vol. 129 No. 3, pp. 262-272, 2003.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증