최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기반도체디스플레이기술학회지 = Journal of the semiconductor & display technology, v.20 no.4, 2021년, pp.114 - 118
최지선 (한국기술교육대학교 메카트로닉스공학과) , 김문기 (한국기술교육대학교 메카트로닉스공학부)
In this research, the dimensional error of the measured specimen according to the measurement method was analyzed for the length, angle, radius of curvature and diameter using a projector which is used in industry. One-way analysis was performed on each data tested 30 times using a statistical techn...
Kim, K. H., "Position and angle detection of surface-mounted parts using projection techniques", Master's Thesis, 1994.
Lee, J. H., "Vibration and displacement measurement using a non-contact optical displacement meter", Master's Thesis, 2002.
Lim, D. Y., and Kim, S. W "A Noncontact Optical Roughness Measurement Technique of Ground Surface by Light Scattering", Journal of The Korean Society of Mechanical Engineers., Vol. 12, No.6, 1988, pp. 1303-1311.
Jang, G. Y., "A Study on the Multi-step digitizing method and Reverse model generation for improvement of Reverse Engineering Accuracy", A master's degree thesis of Incheon university graduate school, 2003, pp. 45-52.
Lee, Y. Y., "Segmentation of scanned point data using a face- based method in reverse engineering", A master's degree thesis of Korea university graduate school, 2003, pp. 41-71.
Kim, M. S., "Study of the reverse engineering to use feature", A master's degree thesis of Kongju university graduate school, 2009, pp. 37-48.
Chung, M. O., "Study on the metal artifact reduction using metal artifact reduction algorithm in dual energy CT", A master's degree thesis of Korea university graduate school, 2013, pp. 28-47.
Hong, S. W "Quantitive analysis of metallic artifact on cone beam CT", Doctor thesis of Engineering of Kyunghee university graduate school, 2010, pp. 7-8.
Jeon, E. C., Kim, S. Y., Han, M. S., and Kim, T. H., "The Study on Application of Reverse Engineering on Correction of a Product Error by Rapid Prototyping", Journal of Korean Society of Manufacturing Process Engineers, 2007, pp. 8-14.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.