[논문]셀룰로오스 나노섬유를 활용한 해양 방오 코팅제에 관한 기초 연구

장낙섭; 김태균; 오홍섭

doi:10.14190/jrcr.2021.9.4.469

[국내논문] 셀룰로오스 나노섬유를 활용한 해양 방오 코팅제에 관한 기초 연구
A Basic Study on the Marine Anti-Fouling Coating Using Cellulose Nanofiber 원문보기

Journal of the Korean Recycled Construction Resources Institute = 한국건설순환자원학회 논문집, v.9 no.4, 2021년, pp.469 - 477

장낙섭 (경상국립대학교 토목공학과) , 김태균 (경상국립대학교 토목공학과) , 오홍섭 (경상국립대학교 토목공학과)

초록
AI-Helper

본 연구에서는 해양환경에 노출된 구조물의 내구성과 안전성 저하를 방지하는 셀룰로오스 방오 코팅제에 대한 기본적인 역학 성능을 평가하였다. 셀룰로오스 나노섬유와 AKD 및 폐유리 미분말을 주요 재료로 구성하여 제조하였으며, 접촉각 시험, 건조 시간, 점성 분석, 미세구조 분석을 실시하였다. 셀룰로오스 방오 코팅제를 1회 코팅할 경우 상대적으로 강재 시편에서 높은 소수성능을 발휘하는 것으로 나타났으며, 시멘트 모르타르에서는 AKD 함유량이 증가할수록 접촉각이 증가하는 것이 확인되었다. 3회 코팅시 최대 151.6°의 초소수성을 표면을 확인하였으며, 폐유리 미분말 혼입시 상대적으로 높은 소수성능을 갖는 것이 나타났다. 셀룰로오스와 증류수를 1:1 비율로 제조할 경우 의가소성 유체에 해당하여 코팅제로의 활용에 적합할 것으로 판단되었다.

Abstract ▼ AI-Helper

In this study, the mechanical property of anti-fouling coating using CNF was evaluated to prevent the durability and stability of structure exposed the marine environment. Anti-fouling coating using CNF was prepared by CNF, AKD and waste glass powder, and contact angle test, drying time, viscosity analysis and microstructure were performed. When coating on one number of times, It was showed to relatively high hydrophobic performance in steel. And It was confirmed that the contact angle increased as the content of AKD increased in cement mortar. When coating on three number of times, the surface was confirmed super-hydrophobic at maximum of 151.6°. When mixing waste glass powder, the surface was showed to relatively high hydrophobic. It is pseudo plastic fluid when CNF and distilled water were prepared in a ratio of 1:1, And Anti fouling coating is judged to be suitable for use as coating on marine structure.

주제어

표/그림 (16)

그림 Fig. 1. Chemical structure of Cellulose
그림 Fig. 2. Grading curve of waste glass powder
표 Table 1. Chemical composition of CNF
표 Table 2. Chemical composition of AKD
표 Table 3. Mix proportion of anti-fouling coating using CNF and result for pH test
그림 Fig. 3. Classification of surface property according to contact angle(Lee et al., 2017)
그림 Fig. 4. Contact angle on the cement mortar and steel with/without anti-fouling coating using CNF
그림 Fig. 5. Contact angle of surface coating on one number of times with anti-fouling coating using CNF
그림 Fig. 6. Contact angle of cement mortar surface with anti-fouling coating using CNF
그림 Fig. 7. The concept of hydrophobic on surface of anti-fouling coating using CNF
표 Table 4. Drying time by anti-fouling coating using CNF
그림 Fig. 8. Qualitative flow curves for different types of fluids(Chhabra 2010)
그림 Fig. 9. Variation of shear stress with shear rate on anti-fouling coating using CNF
그림 Fig. 10. EDS spectrum
그림 Fig. 11. SEM Image of cement mortar surface coated with anti-fouling coating using CNF
그림 Fig. 12. SEM Image of anti-fouling coating using CNF

참고문헌 (38)

Almeida, E., Diamantino, T.C., Sousa, O. (2007). Marine paints: the particular case of antifouling paints, Progress in Organic Coating, 59(1), 2-20.

상세보기
Bae, J.W., Park, G.S., Ru, M.L., Park, G.H. (2019). Antifouling effect of an ultrasonic system operating at different frequencies, Journal of the Korean Society of Marine Environment & Safety, 25(5), 609-616 [in Korean].

원문보기 상세보기
Chen, H., Yang, J., Hu, Z., Zheng, B., Sun, J., Wo, Q., ... Zhu, R. (2019). Effects of AKD sizing on the morphology and pore distribution properties of OCC fibers, Journal of Nanomaterials, 2019.

상세보기
Cherian, B.M., Leao, A.L., de Souza, S.F., Costa, L.M.M., de Olyveira, G.M., Kottaisamy, M., ... Thomas, S. (2011). Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications, Carbohydrate Polymers, 86(4), 1790-1798.

상세보기
Chhabra, R.P. (2010). Non-newtonian fluids: an introduction, In Rheology of Complex Fluids, 1(10), 3-34.
Cho, S.H., Ryu, S.N., Hwang, W.B., Yoon, B.S. (2013). Anti-fouling propery of hydrophobic surfaces in sea water, Journal of the Korean Society for Marine Environment and Energy, 16(2), 82-87 [in Korean].

원문보기 상세보기
Cho, S.W., Hwang, S.Y., Park, J.Y., Oh, D.S. (2021). Nanocellulose and nanochitin-based all-organic biopolymer composites, Polymer Science and Technology, 32(1), 15-20 [in Korean].
De Azeredo, H.M. (2009). Nanocomposites for food packaging applications, Food Research International, 42(9), 1240-1253.

상세보기
Goo, S.I., Park, H.J., Yook, S.Y., Park, S.Y., Youn, H.J. (2018). Preparation of hydrophobized cellulose nanofibril film with high strength using AKD, Journal of Korea TAPPI, 50(6), 34-41 [in Korean].

상세보기
Habibi, Y., Lucia, L.A., Rojas, O.J. (2010). Cellulose nanocrystals: chemistry, self-assembly, and applications, Chemical Reviews, 110(6), 3479-3500.

상세보기
Han, S.Y., Park, C.W., Kim, B.Y., Lee, S.H. (2015). Effect of the addition of various cellulose nanofibers on the properties of sheet of paper mulberry bast fiber, Journal of the Korean Wood Science and Technology, 43(6), 730-739 [in Korean].

원문보기 상세보기
Hong, S.K., Lee, K.Y. (2013). Superhydrophobic nano patterning techniques for enhanced performance of naval underwater vessels, Journal of Ocean Engineering and Technology, 27(2), 114-120 [in Korean].

원문보기 상세보기
Isogai, A. (2013). Wood nanocelluloses: fundamentals and applications as new bio-based nanomaterials, Journal of Wood Science, 59(6), 449-459.

상세보기
Iwamoto, S., Yamamoto, S., Lee, S.H., Ito, H., Endo, T. (2014). Mechanical and thermal properties of polypropylene composites reinforced with lignocellulose nanofibers dried in melted ethylene-butene copolymer, Materials, 7(10), 6919-6929.

상세보기
Jung, D.H., Kim, A.R., Moon, D.S., Lee, S.W., Kim, H.J., Ham, Y.H. (2009). Preliminary experimental study on biofouling in real sea environment, Journal of Ocean Engineering and Technology, 23(6), 39-43 [in Korean].
Kalia, S., Boufi, S., Celli, A., Kango, S. (2014). Nanofibrillated cellulose: surface modification and potential applications, Colloid and Polymer Science, 292(1), 5-31.

상세보기
Khalil, H.A., Bhat, A.H., Yusra, A.I. (2012). Green composites from sustainable cellulose nanofibrils: a review, Carbohydrate polymers, 87(2), 963-979.

상세보기
Kim, J.S., Jung, S.H., Kim, J.H., Lee, K.M., Bae, S.H. (2006). Probability-based durability analysis of concrete structures under chloride attack environments, Journal of the Korea Concrete Institute, 18(2), 239-248 [in Korean].

원문보기 상세보기
Kim, S.H., Lee, J.Y., Jo, H.M., Lee, Y.H. (2020). Study on the multilayer barrier coating using cellulose nanofibrils and internal sizing agent, Journal of Korea TAPPI, 52(6), 47-55 [in Korean].

상세보기
Kumar, S., Chauhan, V.S., Chakrabarti, S.K. (2016). Separation and analysis techniques for bound and unbound alkyl ketene dimer(AKD) in paper: a review, Arabian Journal of Chemistry, 9, S1636-S1642.

상세보기
Lavoine, N., Desloges, I., Dufresne, A., Bras, J. (2012). Microfibrillated cellulose-Its barrier properties and applications in cellulosic materials: a review, Carbohydrate Polymers, 90(2), 735-764.

상세보기
Lee, B.H., Kim, H.Y., Hyeon, C.Y., Byeon, J.W. (2017). Failure analysis of commercial water-repellent coatings for high temperature plant, Journal of Applied Reliability, 17(1), 78-82 [in Korean].
Lee, C.S., Kim, M.W. (2014). Prediction of service life for marine concrete structures by exposure experiments, Journal of the Korean Society of Hazard Mitigation, 14(3), 341-349.

원문보기 상세보기
Lee, D.K, Shin, K.J. (2017). Durability design chart for concrete exposed to chloride environment according to KCI concrete standard specification, Journal of the Korea Concrete Institute, 29(6), 649-656.

상세보기
Lee, H.V., Hamid, S.B.A., Zain, S.K. (2014). Conversion of lignocellulosic biomass to nanocellulose: structure and chemical process, The Scientific World Journal, 2014.

상세보기
Lee, J.Y., Jo, H.M., Lee, Y.H., Lee, J.Y. (2021) Effect of polyelectrolyte-cationized cellulose nanofibril on the properties of paper, Journal of Korea TAPPI, 53(3), 49-56 [in Korean].

상세보기
Lee, S.H., Chang, F., Inoue, S., Endo, T. (2010). Increase in enzyme accessibility by generation of nanospace in cell wall supramolecular structure, Bioresource Technology, 101(19), 7218-7223.

상세보기
Leung, K.M., Wheeler, J.R., Morritt, D., Crane, M. (2001). Endocrine disruption in fishes and invertebrates: issues for saltwater ecological risk assessment, Coastal and Estuarine Risk Assessment. Lewis Publishers, Boca Raton, 189-216.
Nechyporchuk, O., Belgacem, M.N., Bras, J. (2016). Production of cellulose nanofibrils: a review of recent advances, Industrial Crops and Products, 93, 2-25.

상세보기
Nogi, M., Yano, H. (2008). Transparent nanocomposites based on cellulose produced by bacteria offer potential innovation in the electronics device industry, Advanced Materials, 20(10), 1849-1852.

상세보기
Okahisa, Y., Abe, K., Nogi, M., Nakagaito, A.N., Nakatani, T., Yano, H. (2011). Effects of delignification in the production of plant-based cellulose nanofibers for optically transparent nanocomposites, Composites Science and Technology, 71(10), 1342-1347.

상세보기
Park, S., Kwon, S., Lee, Y., Koh, W.G., Ha, J.W., Lee, S.Y. (2012). Study on anti-biofouling properties of the surfaces treated with perfluoropolyether(PFPE), Applied Chemistry for Engineering, 23(1), 71-76 [in Korean].

상세보기
Park, Y. (2020). The dyeing properties of mugwort(artemisia princeps) extract using nano-cellulose, Textile Coloration and Finishing, 32(3), 142-149 [in Korean].

원문보기 상세보기
Rol, F., Belgacem, M.N., Gandini, A., Bras, J. (2019). Recent advances in surface-modified cellulose nanofibrils, Progress in Polymer Science, 88, 241-264.

상세보기
Siro, I., Plackett, D. (2010). Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose, 17(3), 459-494.

상세보기
Townsin, R.L. (2003). The ship hull fouling penalty, Biofouling, 19(S1), 9-15.

상세보기
Tsujino, M., Noguchi, T., Tamura, M., Kanematsu, M., Maruyama, I. (2007). Application of conventionally recycled coarse aggregate to concrete structure by surface modification treatment, Journal of Advanced Concrete Technology, 5(1), 13-25.

상세보기
Zinge, C., Kandasubramanian, B. (2020). Nanocellulose based biodegradable polymers, European Polymer Journal, 133, 109758.

상세보기

저자의 다른 논문 :

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증