최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.34 no.1, 2021년, pp.8 - 15
배경민 (Ocean ICT & Advanced Materials Technology Research Division, Research Institute of Medium & Small Shipbuilding) , 임윤지 (Busan Textile Materials Research Center, Korea Dyeing and Finishing Technology Institute) , 윤성원 (Ocean ICT & Advanced Materials Technology Research Division, Research Institute of Medium & Small Shipbuilding) , 하종록 (Ocean ICT & Advanced Materials Technology Research Division, Research Institute of Medium & Small Shipbuilding) , 조제형 (Ocean ICT & Advanced Materials Technology Research Division, Research Institute of Medium & Small Shipbuilding)
In the shipbuilding and marine industry, as a technology for reducing the weight of parts to reduce energy and improve operational efficiency of ships is required, a method of applying fibers-reinforced composites which is high-strength lightweight materials, as part materials can be considered. In ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kim, N.H., and Kim, J., "Technology Trend in Adhesive Materials for Heterogeneous Materials", Journal of Adhesion and Interface, Vol. 19, 2018, pp. 173-176.
Lee, H.S., Lim, B.C., Kim, M.T., Lee, B.S., and Park, S.H., "A Study on the Flow Analysis for KP505 Propeller Open Water Test", Journal of the Korea Academia-Industrial Cooperation Society, Vol. 20, 2019, pp. 150-155.
Choi, J., Kim, S.H., Bang, H.J., and Kim, K.J., "Development of Resin Film Infusion Carbon Composite Structure for UAV", Composites Research, Vol. 32, 2019, pp. 45-49.
Kong, C., Park, H., and Kang, K., "Structural Design and Analysis for Carbon/Epoxy Composite Wing of A Small Scale WIG Vehicle", Journal of the Korean Society for Composite Materials, Vol. 19, 2006, pp. 12-19.
Wang, X., Wang, L., Ding, G., Yan, X., and Yue, S., "Experimental Study on Three-point Bending Performance of CFRP Shaft Embedded FBG Sensor", IOP Conference Series: Materials Science and Engineering, Vol. 768, 2020, pp. 022063.
Jia, X., Chen, G., Yu, Y., Li, G., Zhu, J., Luo, X., Duan, C., Yang, X., and Hui, D., "Effect of Geometric Factor, Winding Angle and Pre-crack Angle on Quasi-static Crushing Behavior of Filament Wound CFRP Cylinder", Composites Part B Engineering, Vol. 45, 2013, pp. 1336-1343.
Shen, W., Luo, B., Yan, R., Zeng, H., and Xu, L., "The Mechanical Behavior of Sandwich Composite Joints for Ship Structures", Ocean Engineering, Vol. 144, 2017, pp. 78-89.
Han, Z., Jeong, S., Noh, J., and Oh, D., "Comparative Study of Glass Fiber Content Measurement Methods for Inspecting Fabrication Quality of Composite Ship Structures", Applied Sciences, Vol. 10, 2020, pp. 5130.
Anyfantis, K.N., "Preliminary Design Assessment of an Alternative Repair Method for Corroded Shear Panels in Ship Hull Structures", Ocean Engineering, Vol. 188, 2019, pp. 106323.
Yang, Y., Fahmy, M. F., Guan, S., Pan, Z., Zhan, Y., and Zhao, T., "Properties and Applications of FRP Cable on Long-span Cable-supported Bridges: A Review", Composites Part B: Engineering, Vol. 190, 2020, pp. 107934.
Kharghani, N., and Guedes Soares, C., "Experimental and Numerical Study of Hybrid Steel-FRP Balcony Overhang of Ships under Shear and Bending", Marine Structures, Vol. 60, 2018, pp. 15-33.
Kharghani, N., and Guedes Soares, C., "Mechanical Properties Evaluation of the Components of a Failed Hybrid Steel-FRP Balcony Overhang in Ships", Marine Structures, Vol. 68, 2019, pp. 102647.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.