최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.5, 2021년, pp.8 - 16
이주연 (한국기계연구원 스마트산업기계연구실) , 김수철 (한국기계연구원 스마트산업기계연구실)
This study develops a shaft analysis model for the optimization of the power transmission system. The finite element method was used for the shaft analysis model. The shaft and gear were assumed Timoshenko beams. Strength was evaluated according to DIN 743, and gear misalignment was calculated throu...
Bhat, M., "New Seven Speed DCT Transaxle and Effect of Angular Positioning of Shaft" SAE Technical Paper. 2020.
Lee, D. C., Park, S. H., Kang, D. S., and Kim, T. U. "A study on the strength analysis of crankshaft for 4 stroke marine diesel engine," In Proceedings of the Korean Society for Noise and Vibration Engineering Conference, The Korean Society for Noise and Vibration Engineering. 2006.
Lee J. Y., "Finite Elements Method," Munundang, pp. 23-26, 2011.
Logan L. D., A first course in the finite element method, Cengage, Stamford, pp. 78-91, 2017.
Song, G., Li, H., Hou, J., Li, S., Wen, B. "A stability analysis of turning process considering the workpiece as a timoshenko beam," Journal of Vibroengineering, Vol. 15, No. 4, pp. 1927-1939, 2013.
Koide, T., Oda, S., Matsuura, S., Kubo, A. "Equivalent misalignment of gears due to deformation of shafts, bearings and gears," JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing, Vol. 46, No. 4, pp. 1563-1571, 2003.
Ming, Y., Liu, H. Q. "A dynamic modeling method for helical gear systems," Journal of Vibroengineering, Vol. 19, No. 1, pp. 111-124, 2017.
Palermo, A., Mundo, D., Hadjit, R., Desmet, W. "Multibody element for spur and helical gear meshing based on detailed three-dimensional contact calculations," Mechanism and machine theory, Vol. 62, pp. 13-30, 2013.
Jiang, H., Shao, Y., Mechefske, C. K., Chen, X. "The influence of mesh misalignment on the dynamic characteristics of helical gears including sliding friction," Journal of Mechanical Science and Technology, Vol. 29, No. 11, pp. 4563-4573, 2015.
Ganti, V., Dewangan, Y. K. and Subramanian, G. "Influence of Gear Web and Macro Geometry on Mesh Misalignment," SAE Technical Paper, 2016.
ISO 6336, "Calculation and load capacity of spur and helical gears," 2006.
Peter K., MATLAB Guide to Finite Elements, Springer, pp. 183-195, 2007.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.