최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기반도체디스플레이기술학회지 = Journal of the semiconductor & display technology, v.20 no.2, 2021년, pp.43 - 50
김승욱 (구미대학교 기계공학과)
The properties of materials which are widely used in industry fields like automobile, shipbuilding, casting, and electronics are strongly needed to have higher surface hardness, lower surface roughness, and higher compressive residual stress. As mentioned above, for the purpose of satisfying three f...
Gyujin Park, Min-Woo Kang, Jae-Gil Jung, Young-Kook Lee, Byung-Hoon Kim, "The Effects of Homogenization, Hot-Forging, and Annealing Condition on Microstructure and Hardness of a Modified STD61 Hot-Work Tool Steel", J. of the Korean Society for Heat Treatment, Vol. 26, No. 2, pp. 72-79, 2013.
S. W. Kim, S. R. Lee, Y. K. Kim, W. K. Lee, D. Y. Lee, "Development of Die-casting Plunger Sleeve for Separation and Structure Analysis via Tread Joint", Conf of KSPE, pp.596-597,
F. Miglierina, B. Vianello, "Shot Sleeve With Integral Thermal Regulation", Proceedings of 6th Tooling int. Conf. on The use of Tool Steels, Vol. 2. pp. 1317-1341, 2002.
Yucong Wang, "A study of PVD coatings and die materials for extended die-casting die life", Surface and Coatings Technology, Vol .94-95, pp. 60-63, 1997.
R.Shivpuri, M. Yu, K.Venkatesan, Y.-L Chu, "A study of erosion in die casting dies by a multiple pin accelerated erosion test", Journal of Materials Engineering and Performance, Vol. 4, Issue 2, pp. 145-153, 1995.
Banh Tien Long, Ngo Cuong, Nguyen Huu Phan and Vijay Kumar S. Jatti, "Surface improvement of SKD61 die steel material after electrical discharge machining with graphite electrode", Jounal of Chemical and Pharmaceutical Research, 2015,7(7):1204-1211.
R. Shivpuri, Y. L. Chu, K. Venkatesan, J. R. Conrad, K. Sridhara, M. Shamim, R. P. Fetherston, "An evaluation of metallic coatings for erosive wear resistance in die casting applications", Wear, Vol. 192, Issues 1-2, pp. 49-55, 1996.
C. M. Seo and S. Y. Oh, "Fatigue and Fracture Mechanics", Won Chang, pp. 50-61, 2009.
Shu-Hung Yeh, Liu-Ho Chiu, Tao-Liang Chuang, Cheng-Yen Wu, "Thermal Fatigue Behavior Evaluation of Shot-Peened JIS SKD61 Hot-Work Mold Steel", Material Transactions, Vol.54, No.6, pp.1053-1056, 2013.
https://www.dcu.ie/mechanical_engineering/technical/undergrad/milling_guide.shtml.
http://serc.carleton.edu/research_education/geochemsheets/techniques/XRD.html.
J.P. Nobre, M.Kornmeier, A.M. Dias, B. Scholtes, "Use of the hole-drilling method for measuring residual stresses in highly stressed shot-peened surface", Experimental Mechanics, Vol .40, Issue 3, pp 289-297, 2000.
Dong-Woo Lee and Seok-Swoo Cho, "Comparison of X-ray residual stress measurements for rolled steels", International Journal of precision Engineering and Manufacturing December, Vol. 12, Isssue 6, pp. 1001-1008, 2011.
Yang-Soon Park, Sun-Ho Han and Kyuseok Song, "Oxidation behavior on the surface of titanium metal specimens at high temperatures (300~1000℃)", Analytical Sciencce & Technology Vol. 22, No.6, 464-470, 2009.
J. Winiarski, W. Tylus, K. Winiarska, B. Szczygiel, "The influence of molybdenum on the corrosion resistance of ternary Zn-Co-Mo alloy coatings deposited from citratesulphate bath", Corrosion Science February, Vol.91, pp. 330-340, 2015.
Confocal Laser Scanning Microscopy operating manual, ZEISS.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.