최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.7, 2021년, pp.15 - 24
김영복 (한국광기술원 지능형광학모듈연구센터) , 이의삼 (한국광기술원 지능형광학모듈연구센터) , 박준 (한국광기술원 지능형광학모듈연구센터) , 황연 (한국광기술원 지능형광학모듈연구센터) , 이준기 (전남대학교 신소재공학부)
In this paper, to analyze the types of surface morphology error according to factors that cause machining error, the experiments were conducted in the ultra-precision diamond machine using a diamond tool. The factors causing machining error were classified into the pressure variation of compressed a...
Kim, Y. B., Park, J., Lee, W. S., and Lee, J. K., "Fabrication of Microlens Array by the Tilted Milling Method to Improve the Surface Morphology," Materials and Manufacturing Processes, 2021.
Lee, D. K., Kim, H. U., Cha, D. H., Lee, H. S., Kim, H. J., et al., "A Study on Thermal Deformation Compensation in the Molding of Aspheric Glass Lenses," Journal of the Korean Society for Precision Engineering, Vol. 27, No. 5, pp. 22-26, 2010.
Hatefi, S. and Abou-El-Hossein, K., "Review of Single-point Diamond Turning Process in Terms of Ultra-precision Optical Surface Roughness," The International Journal of Advanced Manufacturing Technology, Vol. 106, No. 5, pp. 2167-2187, 2020.
Kim, M. S., Kim, J. T., Park, S W., Jeong, D. U., et al., "Effect of Unbalance on Vibration and Machining of Al6061 Aluminum Alloy in Precision Rotator," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 20 No. 3 pp. 76-82, 2021.
Mishra, V., Khan, G. S., Chattopadhyay, K. D., Nand, K., and Sarepaka, R. V., "Effects of Tool Overhang on Selection of Machining Parameters and Surface Finish During Diamond Turning," Measurement, Vol. 55, pp. 353-361. 2014.
Wang, H., To, S., and Chan, C. Y., "Investigation on the Influence of Tool-tip Vibration on Surface Roughness and its Representative Measurement in Ultra-precision Diamond Turning," International Journal of Machine Tools and Manufacture, Vol. 69, pp. 20-29, 2013.
Kim, Y. J., Choi, H. J., Lee, K. H., Yeo, W. J., Jeong, J. Y., et al, "A Study on the Characteristics of Ultra-Precision Surface Cutting of the Mold Material (STAVAX) for the Development of Large Satellite Lens," Journal of the Korean Society for Precision Engineering, Vol. 37, No. 11, pp. 819-825, 2020.
Mishra, V., Khatri, N., Nand, K., Singh, K., and V Sarepaka, R, "Experimental investigation on uncontrollable parameters for surface finish during diamond turning," Materials and Manufacturing Processes, Vol. 30, No. 2, pp. 232-240, 2015.
Mishra, V., Garg, H., Karar, V., and Khan, G. S., Ultra-precision Diamond Turning Process, Springer, 2019.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.