최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전력전자학회 논문지 = The Transactions of the Korean Institute of Power Electronics, v.26 no.5, 2021년, pp.372 - 375
윤덕현 (Dept. of Electrical Engineering, Myongji University) , 이우석 (Dept. of Electrical Engineering, Myongji University) , 이준영 (Dept. of Electrical Engineering, Myongji University) , 이일운 (Dept. of Electrical Engineering, Myongji University)
A three-leg inverter-type isolated DC-DC Converter that can use 220 and 440 V grid input voltages is introduced. The secondary circuit structure of the proposed topology is center-tap, which is the same as the conventional phase-shifted full-bridge converter. However, the primary circuit structure i...
J. A. Sabate, V. Vlatkovic, R. B. Ridley, F. C. Lee, and B. H. Cho, "Design considerations for high-voltage high-power full-bridge zero-voltage-switched PWM converter," in Fifth Annual Proceedings on Applied Power Electronics Conference and Exposition, pp. 275-284, 1990.
S. W. Choi, J. M. Lee, and J. Y. Lee, "High-efficiency portable welding machine based on full-bridge converter with ISOP-connected single transformer and active snubber," IEEE Transactions on Industrial Electronics, Vol. 63, No. 8, pp. 4868-4877, 2016.
W. Y. Ahn, W. K Lee, and M. S. Han, "Characteristics of inverter type arc welding power source," Journal of the Korean Power Electronics Society, Vol. 19, No. 3, pp. 38-46, 2014.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.