최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기공업화학 = Applied chemistry for engineering, v.32 no.5, 2021년, pp.569 - 573
조종훈 (한국화학연구원(KRICT) C1가스탄소융합연구센터) , 황혜인 (한국화학연구원(KRICT) C1가스탄소융합연구센터) , 김지홍 (한국화학연구원(KRICT) C1가스탄소융합연구센터) , 이영석 (충남대학교 응용화학공학부) , 임지선 (한국화학연구원(KRICT) C1가스탄소융합연구센터) , 강석창 (한국화학연구원(KRICT) C1가스탄소융합연구센터)
In this study, high-density carbon blocks were manufactured using coke, binder pitch, and impregnated pitch, then the effect of pitch fluidity on the densification of carbon blocks during the impregnation process was investigated. A green block was manufactured through high-pressure figuration of co...
L. Xiaowei, R. Jean-Charles, and Y. Suyuan, Effect of temperature on graphite oxidation behavior, Nucl. Eng. Des. 227, 273-280 (2004).
P. Y. Brisson, H. Darmstadt, M. Fafard, A. Adnot, G. Servant, and G. Soucy, X-ray photoelectron spectroscopy study of sodium reactions in carbon cathode blocks of aluminium oxide reduction cells, Carbon 44, 1438-1447 (2006).
L. Chin-Tu and M. D. Bryant, Thermoelastic evolution of contact area and mound temperatures in carbon graphite electrical brushes, Wear 174, 137-146 (1994).
T. Ding, G. Chen, J. Bu, and W. Zhang, Effect of temperature and arc discharge on friction and wear behaviours of carbon strip/copper contact wire in pantograph-catenary systems, Wear 271, 1629-1636 (2011).
J. W. Lin and H. C. Chang, Measurement of friction surface and wear rate between a carbon graphite brush and a copper ring, Tribol. Trans. 54, 887-894 (2011).
Z. Liu, J. Zhang, H. Zuo, and T. Yang, Recent progress on long service life design of Chinese blast furnace hearth, ISIJ Int. 52, 1713-1723 (2012).
M. Li, Y. Zhou, Y. Liao, and H. Zhou, Effect of defects on thermal conductivity of graphene/epoxy nanocomposites, Carbon 130, 295-303 (2018).
Q. Li, Y. Guo, W. Li, S. Qiu, C. Zhu, X. Wei, M. Chen, C. Liu, S. Liao, and Y. Gong Ultrahigh Thermal Conductivity of Assembled Aligned Multilayer Graphene/Epoxy Composite, Chem. Mater. 26, 4459-4465 (2014).
N. Tiwari, N. Agarwal, D. Roy, K. Mukhopadhyay, and N.E. Prasad, Tailor Made Conductivities of Polymer Matrix for Thermal Management: Design and Development of Three-Dimensional Carbonaceous Nanostructures, Ind. Eng. Chem. Res. 56, 672-679 (2017).
E. Fitzer, The future of carbon-carbon composites, Carbon 25, 163 -190 (1987).
H. O. Pierson, Handbook of carbon, graphite, diamonds and fullerenes: processing, properties and applications, William Andrew, Norwich (2012).
M. Inagaki and F. Kang, Materials science and engineering of carbon: fundamentals, Butterworth-Heinemann, Oxford, (2014).
J. E. Choi, S. Ko, and Y. P. Jeon Preparation of petroleum impregnating pitches from pyrolysis fuel oil using two-step heat treatments, Carbon Lett. 29, 1 (2019).
J. C. Lee, K. S. Shin, D. Y. Lee, B. G. Kim. S. J. Shim, Y. S. Lim, and Y. J. Chung, A Study on the Preparation and Characterization of Carbon Fiber Composite Filter, J. Korean Ceram. Soc. 32, 989-994 (1995).
P. D. Matzinos, J. W. Patrick, and A.Walker, Coal-tar pitch as a matrix precursor for 2-D C/C composites, Carbon 34, 639-644 (1996).
R. Menendez, J. J. Fernendez, J. Bermejo, V. Cebolla, I. Mochida, and Y. Korai, The role of carbon black/coal-tar pitch interactions in the early stage of carbonization, Carbon 34, 895-902 (1996).
J. H. Kim, A. Y. Jo, Y. J. Choi, K. B. Lee, J. S. Im, and B. C. Bai, Improving the mechanical strength of carbon-carbon composites by oxidative stabilization, J. Mater. Res. Technol. 9, 16513-16521 (2020).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.