최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산업융합학회 논문집 = Journal of the Korean Society of Industry Convergence, v.25 no.1, 2022년, pp.55 - 60
This study conducted the measurements of air flow rate for blower systems with experiment and numerical. A new airflow rate test method is suggested, with which it is possible to accurate measurements and calculate the air flow rate for blower systems. The blower(axial fan) is an industrial fluid ma...
J. McWilliams, "Review of Airflow Measurement Techniques," Lawrence Berkeley National Laboratory, pp.1-117, (2002).
A. Jilek, T. Nagy, J. Pecinka, "Air flow rate measurement with various differential pressure methods," Int. Conf. on Military Technologies, (ICMT) pp.535-541, (2017).
C. Cui, W. Cai, H. Chen, "Airflow measurements using averaging Pitot tube under restricted conditions," Building and Environment, vol. 139, pp.17-26, (2018).
O. Ronneseth, P. Liu, M. Alonso, and H. Mathiesn, "Techniques for airflow measurements to determine the real efficiency of heat recovery in ventilation systems," IOP Conf. Series: Earth and Environmental Science, vol. 352, pp.1-9, (2019).
D. Kim, K. Bok, and S. Lee, "A numerical analysis on the system impedance on a fan cooling system," Proc. of the KSME Fall Conf., pp. 1424-1429, (2004).
S. Sediva, M. Uher, M. Halikova, "Application of the monte carlo method to estimate the uncertainty of air flow measurement," Proc. of the 2015 16th International Carpathian Control Conf.,(ICCC) pp.465-469, (2015).
A. Raine, N. Aslam, C. Underwood, S. danaher, "Development of an ultrasonic airflow measurement device for ducted air," Sensors, vol. 15, pp.10705-10722, (2015).
H. Chen, W. Cai, C. Chen, "Fan-independent air balancing method based on computation model of air duxt system," Building and Environment, vol. 105, pp.295-306, (2016).
H. Chen, W. Cai, C. Chen, "Model-based method for testing, adjusting and balancing of HVAC duct system," Model-based Method for Testing, Adjusting and Balancing of HVAC Duct System, vol. 126, pp.498-507, (2016).
L. Czetany, Z. Szantho, P. Lang, "Rectangular supply ducts with varying cross section providing uniform air distribution," Applied Thermal Engineering, vol. 115, pp.141-151, (2016).
I. Kim, W. Park, S. Sohn, Y. Kim, "Numerical Analysis for the development of a Blower to Extend the Life of the Impeller and Reduce Power Costs by Changing the Air Flow," Journal of the Korea Academy Industrial Cooperation Society, vol. 21, no.12, pp. 192-199 (2020).
I. Care, F. Bonthoux, and J. Raymond Fontaine, "Measurement of air flow in duct by velocity measurements," EPJ Web of Conferences, vol. 77, (2014).
M. V. Cruz-Salas, J. A. Castillo, G. Huelsz, "Effect of wind exchanger duct cross-section area and geometry on the room airflow distribution," Journal of Wind Engineering and Industrial Aerodynamics, vol. 179, pp. 514-523 (2018).
ANSYS. Fluent Theory Guide Release 15.0, ANSYS, Inc., Canonsburg, PA, USA, (2013).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.