최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국지반신소재학회논문집 = Journal of the Korean Geosynthetics Society, v.21 no.1, 2022년, pp.1 - 10
박언상 (Construction System Engineering, Soongsil Cyber University) , 김병일 (Expert Group for Earth & Environment)
In this study, a model parameter evaluation method using relative density was proposed to utilize applicable UBC3D-PLM for liquefaction behavior. In addition, dynamic effective stress analysis, that is, liquefaction analysis, was performed on the case of the liquefaction occurrence region where acce...
Beaty, M. H. and Byrne, P. M. (1998), An Effective Stress Model for Predicting Liquefaction Behaviour Of Sand, Geotechnical Earthquake Engineering and Soil Dynamics III ASCE Geotechnical Special Publication, Vol.1, No.75, pp.766-777.
Beaty, M. H. and Byrne, P. M. (2011), UBCSAND Constitutive Model Version 904aR, Itasca UDM Web Site.
Boulanger, R. W. and Ziotopoulou, K. (2015), PM4Sand (Version 3): A Sand Plasticity Model for Earthquake Engineering Applications, Center for Geotechnical Modeling Report No. UCD/CGM-15/01, Department of Civil and Environmental Engineering, University of California, Davis, Calif.
BS 8002 (2015), Code of Practice For Retaining Structures.
Byrne, P. M. (1991), A Cyclic Shear-Volume Coupling and Pore Pressure Model for Sand, International Conferences on Recent Advances in Geotechnical Engineering and Soil Dynamics.
Daftari, A. (2015), New Approach in Prediction of Soil Liquefaction, Geo-Engineering and Mining of the Technische Universitat Bergakademie Freiberg Ph.D Thesis.
Finn, W. L., Ledbetter, R. H. and Wu, G. (1994), Liquefaction in Silty Soils: Design and Analysis, Ground Failure under Seismic Conditions, Geotechnical Special Publication, No.44, pp.51-76.
Hur, S. H., Lee, S. C., Kim, T. H. and Kim, B. J. (2021), Effect of Fines Content Including Clay on Liquefaction of Silt, Journal of The Korean Geotechnical Society, Vol.37, No.8, pp.5-13.
Iai, S., Matsunaga, Y. and Kameoka, T. (1990), Strain Space Plasticity Model for Cyclic Mobility, Report of the Port and harbour Research Institute, Vol.29, No.4.
Makra, A. (2013), Evaluation of The UBC3D-PLM Constitutive Model for Prediction of Earthquake Induced Liquefaction on Embankment Dams, TU Delft Msc Graduation Thesis.
Meyerhof, G. G. (1957), Discussion on Research on determining the density of sands by penetration testing. Proc. 4th Int. Conf. on Soil Mech. and Found. Engrg., Vol. 1, No. 110.
Negussey, D., Wijewickreme, W. K. D., and Vaid, Y. P. (1988), Constant-Volume Friction Angle of Granular Materials, Can. Geotech. J., Vol.25, No.1, pp.50-55
Park, S. S., Kim, Y. S., Byrne, P. M., Kim, D. M. (2005), A Simple Constitutive Model for Soil Liquefaction Analysis, Journal of The Korean Geotechnical Society Vol.21, No.8, pp. 27-35.
PLAXIS (2012), Plaxis Liquefaction Model UBC3D-PLM.
Prakash, S. (1981), Soil Dynamics, McGraw-Hil.
Puebla, H., Byrne, M. and Phillips, M. (1997). Analysis of Canlex Liquefaction Embankments Prototype and Centrifuge Models. Canadian Geotechnical Journal, Vol.34, pp.641-657
Souliotis, C. and Gerolymos, N. (2016), Seismic Effective Stress Analysis of Quay Wall in Liquefiable Soil: The Case History of Kobe, Int. J. of GEOMATE, Vol.10, No.2, pp.1770-1775
Tung, D. V., Tran, N. X., Yoo, B. S. and Kim, S. R. (2020), Evaluation of Input Parameters in Constitutive Models Based on Liquefaction Resistance Curve and Laboratory Tests, Journal of The Korean Geotechnical Society, Vol.36, No.6, pp. 35-46.
VDC (Strong-Motion Virrual Data Center) (2021), Data of Superstition Hills, California 1987, https://www.strongmotioncenter.org/vdc/.
Wu, J., Kammerer, A. M., Riemer, M. F., Seed, R. B. and Pestana, J. M. (2004), Laboratory Study of Liquefaction Triggering Criteria, 13th World Conf on Earthquake Eng, Vancouver BC, Canada: Paper No. 2580. c2004.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.