최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.21 no.1, 2022년, pp.66 - 72
천강민 (금오공과대학교 기계공학과(항공기계전자융합공학전공)) , 안준현 (평화오일씰공업) , 허장욱 (금오공과대학교 기계공학과(항공기계전자융합공학전공))
The Mooney-Rivlin second order optimal strain energy function derived through uniaxial tensile test and analysis was applied to a gasket to confirm the internal stress and surface pressure generated during compression. The Taguchi method, a statistical technique, was used to design the optimum shape...
Lee, H. R., Ahn, J. H., Shin, J. O. and Kim, H. Y., "Design of Solenoid Valve for FCV Cylinder Considered Structural Safety" , Conference of the Korean Society of Manufacturing Process Engineers, pp. 46-46, 2016.
Choi, J. H. and Choi, J. Y., "Research Status of Hydrogen Fuel Cell System Based on Hydrogen Electric Vehicle", Korean Society for Energy, Vol. 29, No. 4, pp. 26-34, 2020.
Sim, J. P., Lee, C. R. and Lee, H. G., "Principle and Application of Hydrogen Fuel Cell as a Renewable Energy Source", The Korean Institute of Electrical Engineers, Vol. 61, No. 11, pp. 15-22, 2012.
Jeon, Y. T. and Jeong, Y. S., "Metallic Bipolar Plates for Polymer Electrolyte Membrane Fuel Cell (PEMFC)", Journal of the Korean Society of Automotive Engineers, Vol. 36, No. 6, pp. 27-32, 2014.
Kim, D. Y., Kim, J. M. and Kim, H. Y., "Study of Analysis Process to Maintain Sealing Efficiency of Automotive Fuel Cell Stack", Conference of the Korean Society Of Automotive Engineers, pp. 549-549, 2008.
Ahn, S. S., Kim, S. R., Park, H. S., Kang, Y. G., Koo, J. M. and Seok, C. S., "Evaluation of Fatigue Characteristics of Rubber for Tire Using Strain Energy Density", The Korean Society of Mechanical Engineers, Vol. 36, No. 10, pp. 1163-1169, 2012.
Yum, B. J., Ko, S. W. and Kim, S. J., "The Taguchi Method for Product and Process Design", The Korean Operations Research and Management Science Society, Vol. 7, No. 2, pp. 321, 1990.
Yum, B. J., Kim, S. J., Seo, S. K., Byun, J. H. and Lee, S. H., "The Taguchi Robust Design Method : Current Status and Future Directions", Korean Institute Of Industrial Engineers, Vol. 39, No. 5, pp. 325-341, 2013.
Wu, R. Z., Yoon, H. S. and Ahn, S. H., "A Study on Design of Micro End-mill Geometry using Taguchi method and Response Surface Method", Conference of the Korean Society for Precision Engineering, pp. 869-870, 2010.
Cheon, K. M., Jang, J. H. and Hur, J. W., "Finite Element Analysis of Gaskets for Hydrogen Fuel Cells", Journal of the Korean Society of Manufacturing Process Engineers, 2021.
Cho, J. K., Kim, R. S., Park, I. K., Kim, Y. C., Hwang, M. J., Suhr, J. H., Jung, H. S., Kang, J. W. and Nam, J. D., "Hyperelastic Material Modeling of Natural Rubber Compounds and Finite Element Analysis of Bushing Performance in Automobile", The Polymer Society of Korea, Vol. 42, No. 6, pp. 946-953, 2018.
Fuel Cell Gasket Friction Coefficient Measurement Report, Pyung Hwa Oil Seal, pp. 16-17, 2020.
Cho, S. H., Kim, C. K. and Kim, Y. G., "Optimized Design of O-Ring using Taguchi Method", Conference of the Korean Soceity Of Tribologists And Lubrication Engineers, pp. 241-247, 2003.
Park, S. K., "Study of Muffler for Rotary Compressor by Taguchi Method Viewpoint", Conference of the Korean Society for Noise and Vibration Engineering(KSNVE), pp. 542-547, 1998.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.