참고문헌 (33)

1. P. Mandal, U. K. Chanda, S. Roy, A review of corrosion resistance method on stainless steel bipolar plate, Mater. Today: Proc., 5 (2018) 17852-17856. 

2. S. B. Jadi, A. E. Jaouhari, A. Aouzal, A. E. Guerraf, M. Bouabdallaoui, R. Wang, E. A. Bazzaoui, M. Bazzaoui, Electropolymerization and corrosion resistance of polypyrrole on nickel bipolar plate for PEM fuel cell application, Mater. Today: Proc., 22 (2020) 52-56. 

3. Y. Song, C. Zhang, C. Ling, M. Han, R. Yong, D. Sun, J. Chen, Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell, Int. J. Hydrog. Energy, 45 (2020) 29832-29847. 

   상세보기

4. N. F. Asri, T. Husaini, A. B. Sulong, E. H. Majlan, W. R. W. Daud, Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review, Int. J. Hydrog. Energy, 42 (2017) 9135-9148. 

   상세보기

5. S. H. Wang, J. Peng, W.B. Lui, Surface modification and development of titanium bipolar plates for PEM fuel cells, J. Power Sources, 160 (2006) 485-489. 

   상세보기

6. K. Feng, Y. Shen, J. Mai, D. Liu, X. Cai, An investigation into nickel implanted 316L stainless steel as a bipolar plate for PEM fuel cel, J. Power Sources, 182 (2008) 145-152. 

7. W. Yoon, X. Huang, P. Fazzino, K.L. Reifsnider, M.A. Akkaoui, Evaluation of coated metallic bipolar plates for polymer electrolyte membrane fuel cells, J. Power Sources, 179 (2008) 265-273. 

   상세보기

8. S. H. Lee, T. H. Yang, S. H. Hyun, Y. S. Yoo, Corrosion behavior of pre-oxidized and thermally nitrided stainless steel for polymer electrolyte membrane fuel cell bipolar plates, Corros. Sci., 58 (2012) 79-85. 

   상세보기

9. M. P. Brady, K. Weisbrod, I. Paulauskas, R. A. Buchanan, K. L. More, H. Wang, M. Wilson, F. Garzon, L. R. Walke, Preferential thermal nitridation to form pin-hole free Cr-nitride to protect proton exchange membrane fuel cell metallic bipolar plates, Scr. Mater., 50 (2004) 1017-1022. 

10. H. Wang, M.P. Brady, G. Teeter, J.A. Turner, Thermally nitrided stainless steels for polymer electrolyte membrane fuel cell bipolar plates Part 1: Model Ni-50Cr and austenitic 349TM alloys, J. Power Sources, 138 (2004) 86-93. 

11. A. Shenhar, I. Gotman, E.Y. Gutmanas, P. Ducheyn, Surface modification of titanium alloy orthopaedic implants via novel powder immersion reaction assisted coating nitriding method, Mater. Sci. Eng., A268 (1999) 40-46. 

12. J. Bi, J. Yang, X. Liu, D. Wang, Z.Yang, G. Liu, X. Wang, Development and evaluation of nitride coated titanium bipolar plates for PEM fuel cells, Int. J. Hydrog. Energy, 46 (2021) 1144-1154. 

    상세보기

13. P. Yi, C. Dong, T. Zhang, K. Xiao, Y. Ji, J. Wu, X. Li, Effect of plasma electrolytic nitriding on the corrosion behavior and interfacial contact resistance of titanium in the cathode environment of proton-exchange membrane fuel cells, J. Power Sources, 418 (2019) 42-49. 

    상세보기

14. S. P. Mani, P. Agilan, M. Kalaiarasan, K. Rvichandran, N. Rajendran, Y. Meng, Effect of multilayer CrN/CrAlN coating on the corrosion and contact resistance behavior of 316L SS bipolar plate for high temperature proton exchange membrane fuel cell, J. Mater. Sci. Technol., 97 (2022) 134-146. 

15. J. Jin, J. Zhang, M. Hu, X. Li, Investigation of high potential corrosion protection with titanium carbonitride coating on 316L stainless steel bipolar plates, Corros. Sci., 191 (2021) 109757. 

    상세보기

16. P. Yi, L. Peng, T. Zhou, H. Wu, X. Lai, Cr-N-C multilayer film on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells using closed field unbalanced magnetron sputter ion plating, Int. J. Hydrogen Energy, 38 (2013) 1535-1543. 

    상세보기

17. Y. Wang, S. Zhang, Z. Lu, L. Wang, W. Li, Preparation and performances of electrically conductive Nb-doped TiO 2 coatings for 316 stainless steel bipolar plates of proton-exchange membrane fuel cells, Corros. Sci., 142 (2018) 249-257. 

    상세보기

18. F. Bi, L. Peng, P. Yi, X. Lai, Multilayered Zr-C/a-C film on stainless steel 316L as bipolar plates for proton exchange membrane fuel cells, J. Power Sources, 314 (2016) 58-65. 

    상세보기

19. P. Zhang, C. Hao, Y. Han, Electrochemical behavior and surface conductivity of NbC modified Ti bipolar plate for proton exchange membrane fuel cell, Surf. Coat. Technol., 397 (2020) 126064. 

    상세보기

20. Y. Gou, H. Chen, R. Li, J. Geng, Z. Shao, Nb-Cr-C coated titanium as bipolar plates for proton exchange membrane fuel cells, J. Power Sources, 520 (2022) 230797. 

    상세보기

21. W. Yan, Y. Zhang, Corrosion behavior and interfacial conductivity of amorphous hydrogenated carbon and titanium carbide composite (a-C: H/TiC) films prepared on titanium bipolar plates in PEMFCs, Diamond Relat. Mater., 120 (2021) 108628. 

22. J. Shi, P. Zhang, Y. Han, H. Wang, X. Wang, Y. Yu, J. Sun, Investigation on electrochemical behavior and surface conductivity of titanium carbide modified Ti bipolar plate of PEMFC, Int. J. Hydrog. Energy, 45 (2020) 10050-10058. 

    상세보기

23. P. C. Zhang, Y. T. Han, J. F. Shi, T. Li, H. Y.Wang, X. Y. Wang, J. C. Sun, ZrC Coating Modified Ti Bipolar Plate for Proton Exchange Membrane Fuel Cell, Fuel Cells, 20 (2020) 540-546. 

    상세보기

24. J. Jin, Z. He, X. Zhao, Formation of a protective TiN layer by liquid phase plasma electrolytic nitridation on Ti-6Al-4V bipolar plates for PEMFC, Int. J. Hydrog. Energy, 45 (2020) 12489-12500. 

    상세보기

25. W. Li, L. Liu, Z. Li, Y. Wang, H. Li, J. Lei, Corrosion resistance and conductivity of amorphous carbon coated SS316L and TA2 bipolar plates in proton-exchange membrane fuel cells, Diamond Relat. Mater., 118 (2021) 108503. 

26. J. Wang, L. Min, F. Fang, W. Zhang, Y. Wang, Electrodeposition of graphene nano-thick coating for highly enhanced performance of titanium bipolar plates in fuel cells, Int. J. Hydrog. Energy, 44 (2019) 16909-16917. 

    상세보기

27. I. Alaefour, S. Shahgaldi, J. Zhao, X. Li, Synthesis and ex-situ characterizations of diamond-like carbon coatings for metallic bipolar plates in PEM fuel cells, Int. J. Hydrog. Energy, 46 (2021) 11059-11070. 

    상세보기

28. P. Yi, D. Zhang, D. Qiu, L. Peng, X. Lai, Carbon-based coatings for metallic bipolar plates used in proton exchange membrane fuel cells, Int. J. Hydrog. Energy, 44 (2019) 6813-6843. 

    상세보기

29. A. Shenhar, I. Gotman, S. Radin,P. Ducheyne, E.Y. Gutmanas, Titanium nitride coatings on surgical titanium alloys produced by a powder immersion reaction assisted coating method: residual stresses and fretting behavior, Surf. Coat. Technol., 126 (2000) 210-218. 

    상세보기

30. J. G. G. Rodriguez, M. A. L. Garcia, M. E. Nicho, R. C. Silva, M. Casales, E. Valenzuela, Improvement on the corrosion protection of conductive polymers in pemfc environments by adhesives, J Power Sources, 168 (2007) 184-190. 

31. C. Shanmugham, N. Rajen, Corrosion resistance of poly p-phenylenediamine conducting polymer coated 316L SS bipolar plates for Proton Exchange Membrane Fuel Cells, Progress in Organic Coatings, 89 (2015) 42-49. 

    상세보기

32. E. Valenzuela, Improvement on the corrosion protection of conductive polymers in pemfc environments by adhesives, J. Power Sources, 168 (2007) 184-190. 

33. C.Shanmugham, N.Rajen, Corrosion resistance of poly p-phenylenediamine conducting polymer coated 316L SS bipolar plates for proton exchange membrane fuel cells, Prog. Org. Coat., 89 (2015) 42-49. 

    상세보기