최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국트라이볼로지학회지 = Tribology and lubricants, v.38 no.5, 2022년, pp.213 - 221
정진우 (국민대학교 대학원 기계시스템공학과) , 정권종 (국민대학교 대학원 기계시스템공학과) , 황성호 (국민대학교 대학원 기계설계학과) , 김태호 (국민대학교 기계공학부) , 김어진 (두산에너빌리티)
This paper presents performance measurements of pressure drop and leakage flow rate of test flat seals with asymmetric inclined grooves. This study aims to reveal the influence of groove shapes, often machined in radial film riding-face seals, in forming a hydrodynamic wedge on leakage performance. ...
Chupp, R. E., Ghasripoor, F., Turnquist, N. A., Demiroglu, M., and Aksit,M. F., "Advanced Seals for Industrial Turbine Applications: Dynamic Seal Development," Journal of Propulsion and Power, Vol.18, No.6, pp.1260-1266, 2002.
Saheli, M., and Heshmat, H., "Performance of a Complaint Foil Seal in a Small Gas Turbine Engine Simulator Employing a Hybrid Foil/Ball Bearing Support System," Tribology transactions, Vol.44, No.3, pp.458-464, 2001.
San Andres, L., and Anderson, A., "An All-Metal Compliant Seal Versus a Labyrinth Seal: A Comparison of Gas Leakage at High Temperatures," Journal of Engineering for Gas Turbines and Power, Vol.137, No.5, 2015.
Proctor, M., and Delgado, I., "Preliminary Test Results of a Non-Contacting Finger Seal on a Herringbone-Grooved Rotor," AIAA Paper, No.2008-4506, 2008.
San Andres, L., and Ashton, Z., "Comparison of Leakage Performance in Three Types of Gas Annular Seals Operating at a High Temperature (300℃)," Tribology transactions, Vol.53, No.3, pp.463-471, 2010.
Munson, J., "Testing of a High Performance Compressor Discharge Seal," 29th Joint Propulsion Conference and Exhibit, 1993.
Ludwig, L., and Lynwander, P., "Mainshaft Seals for Small Gas Turbine Engines," American Society of Lubrication Engineers and American Society of Mechanical Engineers, Joint Lubrication Conference, NASA Report No.TM X-71558, 1974.
Dhagat, S. K., Sinhasan, R., and Singh, D. V., "Suitability of Grooved Configurations for Bearings and Seals," Wear, Vol.82, No.1, pp.37-44, 1982.
Liu, Y., Shen, X., Xu, W., and Wang, Z., "Performance Comparison and Parametric Study on Spiral Groove Gas Film Face Seals," Science in China Series G: Physics, Mechanics and Astronomy, Vol.47, No.1, pp.29-36, 2004.
Tibos, S. M., Teixeira, J. A., and Georgakis, C., "Investigation of Effective Groove Types for a Film Riding Seal," Journal of Engineering for Gas Turbines and Power, Vol.139, No.7, 2017.
Childs, D., "Turbomachinery Rotordynamics: Phenomena, Modeling, and Analysis," John Wiley & Sons, pp.332-333, 1993.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.