최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기사물인터넷융복합논문지 = Journal of internet of things and convergence, v.9 no.2, 2023년, pp.41 - 46
이동우 (우송대학교 컴퓨터정보학과) , 이성훈 (백석대학교 컴퓨터공학부)
Smart factory construction projects are continuously being carried out domestically and abroad. In particular, in times of increasing uncertainty, interest in smart factories is increasing to improve corporate productivity. Currently, the government-led smart factory construction project is continuo...
H. K. Lee, "Smart Factory Industry and Market Trends," S&T Market Report, Korea Institute of Science and Technology Advancement, 2018.?
K. S. Jang, "Domestic and Overseas Smart Factory Trends," KB Financial Holding Research Institute, www.kbfg.com/kbresearch, 2017.?
D. W. Lee, K. M. Cho and S. H. Lee, "Research on Efficient Smart Factory Promotion System in IoT Environment", Journal of KIOTS, Vol. 6, No. 4, pp. 59-64, 2020.?
C. Yang, W. Shen and X. Wang, "The Internet of Things in Manufacturing: Key Issues and Potential Applications," IEEE Systems, Man, and Cybernetics Magazine. 2018.?
L. Yuqian, X. Xun and W. Lihui, "Smart manufacturing process and system automation - A critical review of the standards and envisioned scenarios". Journal of Manufacturing Systems. pp. 312-325, 2020.?
D. Jim, E. Thomas, P. James, B. John and S. Michael, "Smart manufacturing, manufacturing intelligence and demand-dynamic performance". Computers & Chemical Engineering. FOCAPO 2012, p. 45-156, 2012.?
C. Leiva, "On the Journey to a Smart Manufacturing Revolution". www.industryweek.com. 2015.?
R. Sudarsan, "Smart Manufacturing Systems Design and Analysis" National Institute of Standards and Technology, 2014.?
J. Leveling, M. Edelbrock and B. Otto, "Big data analytics for supply chain management", 2014 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). pp. 918-922, 2014.?
W. Georgia, "The evolution of 3D printing in manufacturing". Manufacturing Global. BizClick Medial Limited, 2020.?
https://www.smart-factory.kr/smartFactoryIntro#?
H. Andrew, "Industry 4.0 is About More Than Data: 3D Printing in Manufacturing", LNS Research, 2017.?
Press release by the Ministry of SMEs and Startups, "Productivity increased by 30% and employment increased by 3 (4.2%) after the introduction of smart factories for small and medium-sized enterprises" 2019. https://www.mss.go.kr/site/smba/ex/bbs/View.do?cbIdx86&bcIdx1011893&parentSeq1011893?
Ministry of SMEs and Startups press release, "Ministry of SMEs and Startups achieves 20,000 smart factories" 2021.?
https://kosis.kr/search/search.do;jsessionidqxpB1l2NZuPiz6VE1zJ6a7ucKFXuxXtzJZ8gqCB4bB41e9FnbXtJM1zXG35Pe0Uz.STAT_SIGA1_servlet_engine1.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.