$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

탄소섬유강화플라스틱 유래 폐 탄소섬유로 제조된 불화탄소 기반 리튬일차전지의 전기화학적 특성
Electrochemical Characteristics of CFX Based Lithium Primary Batteries Produced by Carbon Fiber Reinforced Plastic -Derived Waste Carbon Fibers 원문보기

공업화학 = Applied chemistry for engineering, v.34 no.5, 2023년, pp.515 - 521  

하나은 (충남대학교 응용화학공학과) ,  임채훈 (충남대학교 응용화학공학과) ,  하성민 (충남대학교 응용화학공학과) ,  명성재 (충남대학교 응용화학공학과) ,  이영석 (충남대학교 응용화학공학과)

초록
AI-Helper 아이콘AI-Helper

본 연구에서는 탄소섬유강화플라스틱(CFRP)을 열분해하여 얻은 폐 탄소섬유를 이용하여 기상 불소화를 통해 불화탄소를 제조하고 리튬일차전지의 환원극 소재로 재활용하고자 하였다. 먼저 열분해로 얻은 폐 탄소섬유의 물리화학적 특성을 파악하였으며, 이 폐 탄소섬유에 기상 불소화 효과를 평가하기 위하여 불화탄소의 구조적, 화학적 특성을 분석하였다. XRD 분석에 의해 폐 탄소섬유의 육각망탄소 적층구조(002피크)는 기상 불소화의 온도가 증가함에 따라 점차 불화탄소 구조(001피크)로 전환되었음을 확인하였다. 이 불화탄소를 이용하여 제조된 리튬일차전지의 방전용량은 최대 862 mAh/g이었다. 이는 다른 탄소 재료로 제조한 불화탄소 기반 리튬이온차전지의 방전용량과 비교하였을 때 우수한 성능을 보였다. 이러한 결과는 폐 CFRP 기반 폐탄소섬유를 이용한 불화탄소는 리튬일차전지의 환원극 소재로 활용할 수 있을 것으로 여겨진다.

Abstract AI-Helper 아이콘AI-Helper

In this study, waste carbon fiber obtained by pyrolysis of carbon fiber reinforced plastic (CFRP) was used to produce carbon fluoride through vapor phase fluorination and recycled as a reducing electrode material for lithium primary batteries. First, the physicochemical properties of the waste carbo...

주제어

표/그림 (10)

참고문헌 (29)

  1. R. A. Witik, R. Teuscher, V. Michaud, C. Ludwig, and J. A. E.?Manson, Carbon fibre reinforced composite waste: An environmental assessment of recycling, energy recovery and landfilling,?Compos. A: Appl. Sci. Manuf., 49, 89-99 (2013).? 

  2. J. Zhang, V. S. Chevali, H. Wang, and C. H. Wang, Current status?of carbon fibre and carbon fibre composites recycling, Compos. B:?Eng., 193, 108053 (2020).? 

  3. L. Giorgini, T. Benelli, G. Brancolini, and L. Mazzocchetti,?Recycling of carbon fiber reinforced composite waste to close their?life cycle in a cradle-to-cradle approach, Curr. Opin. Green?Sustain. Chem., 26, 100368 (2020).? 

  4. S. K. Gopalraj and T. Karki, A review on the recycling of waste?carbon fibre/glass fibre-reinforced composites: Fibre recovery,?properties and life-cycle analysis, SN Appl. Sci., 2, 433 (2020).? 

  5. I. Okajima and T. Sako, Recycling of carbon fiber-reinforced plastic using supercritical and subcritical fluids, J. Mater. Cycles?Waste Manag., 19, 15-20 (2017).? 

  6. I. Okajima, M. Hiramatsu, Y. Shimamura, T. Awaya, and T. Sako,?Chemical recycling of carbon fiber reinforced plastic using supercritical methanol, J. Supercrit. Fluids, 91, 68-76 (2014).? 

  7. J. H. Zhu, P. Chen, M. Su, C. Pei, and F. Xing, Recycling of carbon fibre reinforced plastics by electrically driven heterogeneous?catalytic degradation of epoxy resin, Green Chem., 21, 1635-1647?(2019).? 

  8. S. R. Naqvi, H. M. Prabhakara, E. A. Bramer, W. Dierkes, R.?Akkerman, and G. Brem, A critical review on recycling of?end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy, Resour. Conserv.?Recycl., 136, 118-129 (2018).? 

  9. S. A. Hadigheh, Y. Wei, and S. Kashi, Optimisation of CFRP?composite recycling process based on energy consumption, kinetic?behaviour and thermal degradation mechanism of recycled carbon?fibre, J. Clean. Prod., 292, 125994?(2021). 

  10. L. O. Meyer, K. Schulte, and E. Grove-Nielsen, CFRP-recycling?following a pyrolysis route: Process optimization and potentials, J.?Compos. Mater., 43, 1121-1132 (2009).? 

  11. L. Guo, L. Xu, Y. Ren, Z. Shen, R. Fu, H. Xiao, and J. Liu,?Research on a two-step pyrolysis-oxidation process of carbon fiber-reinforced epoxy resin-based composites and analysis of product properties, J. Environ. Chem. Eng., 10, 107510 (2022).? 

  12. E. Pakdel, S. Kashi, R. Varley, and X. Wang, Recent progress in?recycling carbon fibre reinforced composites and dry carbon fibre?wastes, Resour. Conserv. Recycl., 166, 105340? (2021). 

  13. M. K. Hagnell and M. Akermo, The economic and mechanical potential of closed loop material usage and recycling of fibre-reinforced composite materials, J. Clean. Prod., 223, 957-968 (2019).? 

  14. N. Sharma, M. Dubois, K. Guerin, V. Pischedda, and S. Radescu,?Fluorinated (Nano)Carbons: CFx Electrodes and CFx-Based?Batteries, Energy Technol., 9, 2000605 (2020).? 

  15. S. Ha, C. Lim, and Y. S. Lee, Fluorination methods and the properties of fluorinated carbon materials for use as lithium primary?battery cathode materials, J. Ind. Eng. Chem., 111,1-17 (2022).? 

  16. Y. Peng, Y. Liu, R. Ali, J. Ma, J. Hou, X. Yang, and X. Jian, Air?plasma-induced carbon fluoride enabling active CF bonds for double-high energy/power densities of Li/CFx primary battery, J.?Alloys Compd., 905, 164151 (2022).? 

  17. D. Damien, P. M. Sudeep, T. N. Narayanan, M. R. Anantharaman,?P. M. Ajayan, and M. M. Shaijumon, Fluorinated graphene based?electrodes for high performance primary lithium batteries, RSC?Adv., 111, 1-17 (2013).? 

  18. C. Delabarre, M. Dubois, J. Giraudet, K. Guerin, and A. Hamwi,?Electrochemical performance of low temperature fluorinated graphites used as cathode in primary lithium batteries, Carbon, 44,?2543-2548 (2006).? 

  19. Y. Li, X. Wu, C. Li, S. Wang, P. Zhou,T. Zhou, Z. Miao, W.?Xing, S. Zhou, and J. Zhou, Fluorinated multi-walled carbon nanotubes as cathode materials of lithium and sodium primary batteries:?effect of graphitization of carbon nanotubes, J. Mater. Chem., 3,?25702 (2019).? 

  20. S. Jiang, P. Huang, J. Lu, and Z. Liu, The electrochemical performance of fluorinated ketjenblack as a cathode for lithium/fluorinated carbon batteries, RSC Adv., 11, 25461-25470? (2021). 

  21. P. F. Fulvio, S. S. Brown, J. Adcock, T. Mayes, B. Guo, X. G.?Sun, S. M. Mahurin, G. M. Veith, and S. Dai, Low-temperature?fluorination of soft-templated mesoporous carbons for a high-power lithium/carbon fluoride battery, Chem. Mater., 23, 4420-4427?(2011).? 

  22. T. I. Jeon, J.H. Son, K. H. An, Y. H. Lee, and Y. S. Lee,?Terahertz absorption and dispersion of fluorine-doped single-walled?carbon nanotube, J. Appl. Phys., 98, 3 (2005).? 

  23. J. S. Im, S. J. Park, and Y. S. Lee, The metal-carbon-fluorine system for improving hydrogen storage by using metal and fluorine?with different levels of electronegativity, Int. J. Hydrog. Energy,?34(3), 1423-1428 (2009).? 

  24. N. Ha, S. G. Jeong, C. Lim, S. Ha, C. G. Min, Y. Choi, and Y.?S. Lee, Preparation and electrochemical characteristics of waste-tire?char-based CF X for lithium-ion primary batteries, Carbon Lett., 33,?1013-1018 (2023).? 

  25. C. Lim, Y. Ko, C. H. Kwak, S. Kim, and Y. S. Lee, Mesophase?pitch production aided by the thermal decomposition of polyvinylidene fluoride, Carbon Lett., 32, 1329-1335 (2022).? 

  26. C. Lim, C. H. Kwak, Y. Ko, and Y. S. Lee, Mesophase pitch production from fluorine-pretreated FCC decant oil, Fuel, 328, 125244?(2022).? 

  27. D. B. Schuepfer, F. Badaczewski, J. M. Guerra-Castro, D. M.?Hofmann, C. Heiliger, B. Smarsly, and P. J. Klar, Assessing the?structural properties of graphitic and non-graphitic carbons by?Raman spectroscopy, Carbon, 161, 359-372 (2020).? 

  28. S. E. Lee, J. H. Kim, Y. S. Lee, B. C. Bai, and J. S. Im, Effect?of crystallinity and particle size on coke-based anode for lithium?ion batteries, Carbon Lett., 31, 911-920?(2021). 

  29. J. H. Lim, Y. Myung, M. H. Yang, and J. Lee, Facile formation?of a LiF-carbon layer as an artificial cathodic electrolyte interphase?through encapsulation of a cathode with carbon monofluoride, ACS?Appl. Mater. Interfaces, 13, 31741-31748 (2021). 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로