최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기사물인터넷융복합논문지 = Journal of internet of things and convergence, v.9 no.5, 2023년, pp.25 - 29
안일혁 (동명대학교 기계로봇공학과)
This paper studied the post-processing process of the fused deposition modeling (FDM) process, one of the most widely used 3D printing technologies recently, in prototyping, which is a leading step in the development of various IoT products. The proposed post-treatment process is warm isostatic pres...
D.G.Kim, H.S.Lee, T.W.Kim and H.W.Lee, "LBS/GPS based Bicycle Safety Application with Arduino," Journal of The Korea Internet of Things, Vol.2, No.1,pp.7-15, 2016.?
B.Peng, I.R.U.Numonov, S.K.Yeo and T.K.Kim, "Implementation of IoT-Based Hydroponic Cultivation System," Journal of The Korea Internet of Things, Vol. 9, No.4, pp. 59-69, 2023.?
I.H.Ahn, "A study for the mechanical Properties with Infill Rate in FDM Process to Fabricate the Small IoT Device," Journal of The Korea Internet of Things, Vol.6, No.3, pp.75-80, 2020.?
S.Y.Kim, "A Study of Design for Additive manufacturing Method for Part Consolidation to Redsign IoT Device," Journal of The Korea Internet of Things, Vol.8, No.2, pp.55-59, 2022.?
M.T.Birosz, L.Daniel and A.Matyas, "Effect of FDM infill patters on mechanical properties," Polymer Testing, Vol.113, pp.107654., 2022.?
B.Stucker, I.Gibson and D.Rosen, Additive manufacturing Technologies, 2nd ed., New York: Springer. 2015.?
T.Wohler, Wohlers report 2018, Wohlers Associates Inc. 2018.?
S.J.Park, S.J.Park, Y.Son and I.H.Ahn, "Reducing anisotropy of a part fabricated by material extrusion via warm isostatic pressure (WIP) process," Additive Manufacturing, Vol.55, pp.102841, 2022.?
S.J. Park, S.J.Park, Y.Son and I.H.Ahn, "Influence of warm isostatic press (WIP) process parameters on mechanical properties of additively manufactured acrylonitrile butadiene styrene (ABS) parts," The International Journal of Advanced Manufacturing Technology, Vol.122, No.7-8, pp.3311-3322, 2022.?
Strarasys, ABSplus, Srong, Intricated 3D Printred Parts With ABSplus, www.stratasys.com/en/materials/materials-catalog/polyjet-materials/abs-plus/#_ga2.174591330.1780685185.1697619194-510809802.1697619194&_gac1.114742517.1697619194.Cj0KCQjwhL6pBhDjARIsAGx8D5-FW1WwH18QGLbx10WRLYTt7nRfY3zZPTd0lovKqpCJe6ghaahG4zkaAgqhEALw_wcB.?
ASTM D638-22, Standard Test Method For Tensile Properties Of Plastics, webstore.ansi.org/standards/astm/astmd63822.?
I.Anno, T.Wakamatsu, I.Ihara and M.Kanari, "Mechanical properties of copper phthalocyannie thin films densified by cold and warm isostatic press processes," Molecular Crystals and Liquid Crystals, Vol.653, No.1, pp.248-253, 2017.?
S.J.Park, H.G.Ju, S.J.Park, S.J.Hong, Y.Son and I.H.Ahn, "New possibilities in polymer binder jetting additive manufacturing via infiltration and warm isostatic pressing," Material&Design, Vol.231, pp.112045, 2023.?
N.Feng, X.Wang, D.Wu, "Surface modification of recycled carbon fiber and its reinforcement effect on nylon 6 composites: Mechanical properties, morphology and crystallication behaviors," Journal of Applied Physics, Vol.13, No.9, pp.2038-2050, 2013.?
Q.Meng, Y.Gu, L.Luo, S.Wang, M.Li and Z.Zhnag, "Annealing effect on crystalline structure and mechanical properties in long glass fiber reinforced polyamide 66," Journlal of Applied plymer Science, Vol. 134, No.23, pp.44832, 2017.?
K.Gupta, V.Fegade, J.Kittur, M.Ramachandran, S.Madhu, S.Chinnasami and M. Amudha, "A review of effect of cooling rate in fiber reinforced polymeric composites," AIP Conference Proceedings, Vol.2393. No.1, 2022.?
M.I.Tayouri, S.Estaji, S.R.Mousavi, S.S.Khasraghi, R.Jahanmardi, S.Nouranian and H.A.Khonakdar, "Degradation of polymer nanocomposites filled with graphene oxide and reduced graphene oxide nanoparticles: A review of current status," Polymer Degradation and Stability, pp. 110179, 2022.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.