참고문헌 (23)

1. 10.2307/j.ctt1tp3c5w.31 

   

2. Robert, H., “Think Formwork-Reduced Cost,” Structure Magazine, pp. 14-16, 2007. 

3. García de Soto, Borja, Agustí-Juan, Isolda, Hunhevicz, Jens, Joss, Samuel, Graser, Konrad, Habert, Guillaume, Adey, Bryan T.. Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall. Automation in construction, vol.92, 297-311.

   상세보기

4. 10.1007/978-3-319-26378-6_11 

   

5. TailorCreate, “TailorCrete,” http://www.tailorcrete.com/ (Accessed 9 DEC 2019) 

6. Andersen, T. J., Thrane, L. N., and Greisen, J. R., “Robot Milled Formwork for Non-Standardized Concrete Structures,” Proc. of the IASS Annual Symposia on 3D Printing and Robotics, pp. 1-8, 2015. 

7. Oesterle, S., Vansteenkiste, A., and Mirjan, A., “Zero Waste Free-Form Formwork,” Proc. of the ICFF 2nd International Conference on Flexible Formwork, Vol. 30, pp. 258-267, 2012. 

8. Lloret, E., Shahab, A.R., Linus, M., Flatt, R.J., Gramazio, F., Kohler, M., Langenberg, S.. Complex concrete structures. Computer aided design, vol.60, 40-49.

   상세보기

9. Jipa, A., Bernhard, M., Meibodi, M., and Dillenburger, B., “3DPrinted Stay-in-Place Formwork for Topologically Optimized Concrete Slabs,” Proc of the TxA Emerging Design + Technology Conference on Texas Society of Architects, pp. 97-107, 2016. 

10. Orr, J. J ., D arby , A. P., I bell, T. J ., E vernden, M ., a nd O tlet, M., “Concrete Structures Using Fabric Formwork,” Structural Engineer, Vol. 89, No. 8, pp. 20-26, 2011. 

11. Kromoser, Benjamin, Kollegger, Johann. Pneumatic forming of hardened concrete - building shells in the 21st century. Structural concrete : journal of the FIB, vol.16, no.2, 161-171.

    상세보기

12. Søndergaard, Asbjørn, Feringa, Jelle, Stan, Florin, Maier, Dana. Robotic abrasive wire cutting of polymerized styrene formwork systems for cost-effective realization of topology-optimized concrete structures. Construction robotics, vol.2, no.1, 81-92.

    상세보기

13. 10.3218/3778-4_21 Brander, D., Bærentzen, J. A., Clausen, K., Fisker, A. S., Gravesen, J., et al., “Designing for Hot-Blade Cutting: Geometric Approaches for High-Speed Manufacturing of Doubly-Curved Architectural Surfaces,” Advances in Architectural Geometry, pp. 306-327, 2016. 

    

14. 서정환, 홍대희. 비정형 콘크리트 거푸집 제작을 위한 EPS Foam의 3D 가공기계. 한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, vol.34, no.1, 35-39.

    원문보기 상세보기

15. Lee, D. Y., Lee, D. M., Cho, H. H., and Kang, K. I., “The Production Process and Mock-Up Test of Freeform Concrete Segments Using LOM Type 3D Printer,” Journal of the Korea Institute of Building Construction, Vol. 18, No. 1, pp. 89-98, 2018. 

16. 정상열, 심준혁, 김학민, 신동빈, 홍대희. 비정형 건축을 위한 LOM적층기술의 응용. 한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, vol.34, no.12, 903-909.

    상세보기

17. 이정호, 주영규, 김학범. 3D 프린터로 제작된 비정형 거푸집의 최대 측압에 대한 유한요소해석. 한국공간구조학회논문집 = Journal of the Korean Association for Spatial Structures, vol.17, no.4, 167-174.

    원문보기 상세보기

18. 김학민, 심준혁, 정상열, 홍대희. 평행 CO₂ 레이저 빔을 이용한 EPS 폼 절단 가공의 최적 절단 조건에 대한 연구. 한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, vol.36, no.9, 859-865.

    상세보기

19. Bikas, H., Stavropoulos, P., Chryssolouris, G.. Additive manufacturing methods and modelling approaches: a critical review. International journal of advanced manufacturing technology, vol.83, no.1, 389-405.

    상세보기

20. Hope, R.L., Jacobs, P.A., Roth, R.N.. Rapid prototyping with sloping surfaces. Rapid prototyping journal, vol.3, no.1, 12-19.

    상세보기

21. Kang, J. G., “Development of Post-Processor and Cutting Motion Simulator for 5-Axis CNC Laser Cutting Machine,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 7-13, 2009. 

22. Shehata, Mostafa E., El-Gohary, Khaled M.. Towards improving construction labor productivity and projects’ performance. Alexandria engineering journal : AEJ, vol.50, no.4, 321-330.

    상세보기

23. Park, Y., Jo, S., and Kim, S., “Development of the Free-Formed Concrete Structure Construction Technologies Using 3D Digital Design,” Proc. of the Korea Institute of Building Construction Autumn Conference, Vol. 12, No. 1, pp. 205-208, 2012.