최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Polymer testing, v.100, 2021년, pp.107241 -
Pyo, Jae-Bum (Corresponding author.) , Lee, Sangmin , Kim, Taek-Soo
Abstract Nanoporous ionomer-bound carbon films are frequently operated in the wet environments when they applied as electrode materials in advanced devices, such as polymer electrolyte membrane fuel cells, and electro-active polymer actuators. However, the intrinsic swelling behavior is still conce...
Appl. Catal. B Environ. Antolini 88 1-2 1 2009 Carbon supports for low-temperature fuel cell catalysts
J. Mater. Chem. Palmre 21 8 2577 2011 10.1039/c0jm01729a Electroactive polymer actuators with carbon aerogel electrodes
J. Power Sources Sharma 173 2 1024 2007 10.1016/j.jpowsour.2007.08.076 Carbon-supported, nano-structured, manganese oxide composite electrode for electrochemical supercapacitor
J. Appl. Electrochem. Wilson 22 1 1 1992 10.1007/BF01093004 Thin-film catalyst layers for polymer electrolyte fuel cell electrodes
J. Electrochem. Soc. Zhao 165 6 F3337 2018 10.1149/2.0391806jes Experimental observations of microstructure changes in the catalyst layers of proton exchange membrane fuel cells under wet-dry cycles
J. Power Sources Rong 175 2 699 2008 10.1016/j.jpowsour.2007.10.006 Microstructure changes in the catalyst layers of PEM fuel cells induced by load cycling: Part I. Mechanical model
Electrochem. Commun. Yin 109 106590 2019 10.1016/j.elecom.2019.106590 Ionomer migration within PEMFC catalyst layers induced by humidity changes
J. Fuel Cell Sci. Technol. Uchiyama 9 6 2012 10.1115/1.4007814 Mechanical degradation mechanism of membrane electrode assemblies in buckling test under humidity cycles
J. Power Sources Tavassoli 322 17 2016 10.1016/j.jpowsour.2016.05.016 Effect of catalyst layer defects on local membrane degradation in polymer electrolyte fuel cells
Mater. Sci. Eng., A Tang 425 1-2 297 2006 10.1016/j.msea.2006.03.055 An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorosulfonic acid membrane
J. Power Sources Goulet 274 94 2015 10.1016/j.jpowsour.2014.10.040 Water sorption and expansion of an ionomer membrane constrained by fuel cell electrodes
ACS Appl. Mater. Interfaces Morris 6 18609 2014 10.1021/am503509j Effect of water sorption on the electronic conductivity of porous polymer electrolyte membrane fuel cell catalyst layers
Int. J. Hydrogen Energy Ahadi 44 3603 2019 10.1016/j.ijhydene.2018.12.016 Electronic conductivity of catalyst layers of polymer electrolyte membrane fuel cells: through-plane vs.in-plane
J. Therm. Sci. Technol. Tsushima 10 1 JTST0002 2015 10.1299/jtst.2015jtst0002 An overview of cracks and interfacial voids in membrane electrode assemblies in polymer electrolyte fuel cells
ACS Appl. Mater. Interfaces Kim 8 24 15391 2016 10.1021/acsami.6b03854 Mechanical behavior of free-standing fuel cell electrodes on water surface
Prog. Org. Coating Dickie 25 1 3 1994 10.1016/0300-9440(94)00500-1 Paint adhesion, corrosion protection, and interfacial chemistry
Construct. Build. Mater. Metelli 102 1018 2016 10.1016/j.conbuildmat.2015.09.038 On the delamination phenomenon in the repair of timber beams with steel plates
IEEE Trans. Compon. Packag. Technol. Teh 28 3 506 2005 10.1109/TCAPT.2005.848572 Moisture-induced failures of adhesive flip chip interconnects
J. Mater. Chem. Pyo 8 24763 2020 10.1039/D0TA07861A Highly robust nanostructured carbon films by thermal reconfiguration of ionomer binding
Nat. Commun. Kim 6 8547 2015 10.1038/ncomms9547 Flexible, highly efficient all-polymer solar cells
Langmuir Kang 34 20 5831 2018 10.1021/acs.langmuir.8b01063 Layer-by-Layer assembly of free-standing Nanofilms by controlled rolling
Soft Matter Pyo 12 18 4135 2016 10.1039/C5SM03109E Prediction of time-dependent swelling of flexible polymer substrates using hygro-mechanical finite element simulations
Nano Lett. Huang 14 11 6293 2014 10.1021/nl5026369 Precision structural engineering of self-rolled-up 3D nanomembranes guided by transient quasi-static FEM modeling
Nat. Commun. Kim 4 2520 2013 10.1038/ncomms3520 Tensile testing of ultra-thin films on water surface
Polym. Test. Lee 51 181 2016 10.1016/j.polymertesting.2016.03.014 Contact-free thermal expansion measurement of very soft elastomers using digital image correlation
Nat. Commun. Lopez-Haro 5 5229 2014 10.1038/ncomms6229 Three-dimensional analysis of Nafion layers in fuel cell electrodes
ECS Transac. Huang 16 2 1987 2008 10.1149/1.2982039 The mechanical changes in the MEA of PEM fuel cells due to load cycling
J. Electrochem. Soc. Iden 158 8 B987 2011 10.1149/1.3598141 Relationship among microstructure, ionomer property and proton transport in pseudo catalyst layers
J. Electrochem. Soc. Li 159 2 B173 2011 10.1149/2.065202jes Experimental measurement of stress and strain in nafion membrane during hydration cycles
J. Phys. Chem. B Satterfield 112 12 3693 2008 10.1021/jp7103243 Non-Fickian water vapor sorption dynamics by Nafion membranes
J. Polym. Sci. B Polym. Phys. Bauer 43 7 786 2005 10.1002/polb.20367 Influence of temperature and humidity on the mechanical properties of Nafion® 117 polymer electrolyte membrane
J. Mater. Sci. Zhang 42 10 3408 2007 10.1007/s10853-007-1688-5 Carbon based conductive polymer composites
Electrochim. Acta Secanell 52 22 6318 2007 10.1016/j.electacta.2007.04.028 Multi-variable optimization of PEMFC cathodes using an agglomerate model
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.