[논문]A performance comparison of the full pose- and partial pose-based robot calibration for various types of robot manipulators

Nguyen, Hoai-Nhan; Le, Phu-Nguyen; Kang, Hee-Jun

doi:10.1177/16878140211047754

A performance comparison of the full pose- and partial pose-based robot calibration for various types of robot manipulators 원문보기

Advances in mechanical engineering, v.13 no.9, 2021년, pp.168781402110477 -

Nguyen, Hoai-Nhan (Faculty of Computer Engineering, VNUHCM - University of Information Technology, Ho Chi Minh City, Viet Nam) , Le, Phu-Nguyen (Department of Information Technology Specialization, FPT University, Hoa Lac High Tech Park, Hanoi, Vietnam) , Kang, Hee-Jun (Department of Electrical, Electronic and Computer Engineering, University of Ulsan, Ulsan, South Korea)

Abstract ▼ AI-Helper

Robot kinematic calibration used to be carried out with the partial pose measurements (position only) of dimension 3 in industry, while full pose measurements (orientation and position) of dimension 6 sometimes could be considered to improve the calibration performance. This paper investigates the effects of measurement dimensions on robot calibration accuracy. It compares the resulting robot accuracies in both partial pose and full pose cases after calibrating three structural types of robot manipulators such as a serial manipulator (Hyundai HA-06 robot), a single closed-chain manipulator (Hyundai HX-165 robot), and a multiple closed-chain manipulator (Hyundai HP-160 robot). These comparative studies show when the full-pose based calibration need to be considered and how much it contributes the improvement of robot accuracy to the different structural type of robot manipulators.

참고문헌 (21)

Hayati, S., Mirmirani, M.. Improving the absolute positioning accuracy of robot manipulators. Journal of robotic systems, vol.2, no.4, 397-413.

상세보기
10.1007/BFb0042539
10.1109/IROS.2003.1249712
Lightcap, C., Hamner, S., Schmitz, T., Banks, S.. Improved Positioning Accuracy of the PA10-6CE Robot with Geometric and Flexibility Calibration. IEEE transactions on robotics : a publication of the IEEE Robotics and Automation Society, vol.24, no.2, 452-456.

상세보기
Veitschegger, W., Chi-Haur Wu,. Robot accuracy analysis based on kinematics. IEEE journal of robotics and automation, vol.2, no.3, 171-179.

상세보기
Gatti, G, Danieli, G. A practical approach to compensate for geometric errors in measuring arms: application to a six-degree-of-freedom kinematic structure. Measurement science & technology, vol.19, no.1, 015107-.

상세보기
Omodei, Alberto, Legnani, Giovanni, Adamini, Riccardo. Calibration of a measuring robot: Experimental results on a 5 DOF structure. Journal of robotic systems, vol.18, no.5, 237-250.

상세보기
Everett, Louis J.. Completing the forward kinematic calibration of open loop manipulators when single point position sensors are used. Journal of robotic systems, vol.6, no.1, 19-33.

상세보기
10.1109/ROBOT.1987.1088010
Driels, Morris R., Swayze, W., Potter, S.. Full-pose calibration of a robot manipulator using a coordinate-measuring machine. International journal of advanced manufacturing technology, vol.8, no.1, 34-41.

상세보기
10.1002/(SICI)1097-4563(200006)17:6<291::AID-ROB1>3.0.CO;2-U

상세보기
In-Won Park, Bum-Joo Lee, Se-Hyoung Cho, Young-Dae Hong, Jong-Hwan Kim. Laser-Based Kinematic Calibration of Robot Manipulator Using Differential Kinematics. IEEE/ASME transactions on mechatronics : a joint publication of the IEEE Industrial Electronics Society and the ASME Dynamic Systems and Control Division, vol.17, no.6, 1059-1067.

상세보기
To, Minh, Webb, Phil. An improved kinematic model for calibration of serial robots having closed-chain mechanisms. Robotica, vol.30, no.6, 963-971.

상세보기
Peng, Jingfu, Ding, Ye, Zhang, Gang, Ding, Han. An enhanced kinematic model for calibration of robotic machining systems with parallelogram mechanisms. Robotics and computer-integrated manufacturing, vol.59, 92-103.

상세보기
10.1007/978-981-32-9437-0_62
Xie, Zexiao, Zong, Pengfei, Yao, Peng, Ren, Ping. Calibration of 6-DOF industrial robots based on line structured light. Optik, vol.183, 1166-1178.

상세보기
Nguyen, Hoai-Nhan, Zhou, Jian, Kang, Hee-Jun. A New Full Pose Measurement Method for Robot Calibration. Sensors, vol.13, no.7, 9132-9147.

상세보기
Introduction to robotics: mechanics and control John JC 1986
Denavit, J., Hartenberg, R. S.. A Kinematic Notation for Lower-Pair Mechanisms Based on Matrices. Journal of applied mechanics, vol.22, no.2, 215-221.

상세보기
International conference on intelligent computing Nguyen H-N 285
Zak, G., Benhabib, B., Fenton, R. G., Saban, I.. Application of the Weighted Least Squares Parameter Estimation Method to the Robot Calibration. Journal of mechanical design, vol.116, no.3, 890-893.

상세보기

LOADING...

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

A performance comparison of the full pose- and partial pose-based robot calibration for various types of robot manipulators 원문보기

Abstract ▼ AI-Helper

참고문헌 (21)

이 논문을 인용한 문헌

연구과제 타임라인

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

연합인증

A performance comparison of the full pose- and partial pose-based robot calibration for various types of robot manipulators 원문보기

Abstract ▼ AI-Helper

참고문헌 (21)

이 논문을 인용한 문헌

연구과제 타임라인

전체(0) 논문(0) 특허(0) 보고서(0)

전체(0) 논문(0) 특허(0) 보고서(0)

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트