최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of materials processing technology, v.169 no.2, 2005년, pp.281 - 291
Gao, C.Y. (Ecole des Mines d’Albi-Carmaux, Reseach Center on Tools, Materials and Processes (CROMeP), 81013 Albi CT Cedex 09, France) , Lours, P. (Ecole des Mines d’Albi-Carmaux, Reseach Center on Tools, Materials and Processes (CROMeP), 81013 Albi CT Cedex 09, France) , Bernhart, G. (Corresponding author. Tel.: +33 563 493 079)
AbstractA thermomechanical stress analysis of a superplastic forming (SPF) tool is performed by means of the finite element simulation of the whole forming process. The distributions of residual stress and distortion within the tool are investigated in order to evaluate the damage effects of thermom...
Mater. Sci. Technol. Cope 2 140 1986 10.1179/mst.1986.2.2.140 Superplastic deformation characteristics of micro-duplex Ti-6Al-4V alloy
J. Mater. Process. Technol. Vasquez 98 2 212 2000 10.1016/S0924-0136(99)00202-2 New concepts in die design-physical and computer modeling applications
J. Mater. Process. Technol. Oh 111 1-3 2 2001 10.1016/S0924-0136(01)00508-8 Recent developments in process simulation for bulk forming processes
Sanders 109 2004 The Third European Conference on Superplastic Forming, EuroSPF04 Reinforced ceramic dies for superplastic forming operations
Mater. Sci. Forum Bames 357-359 3 2001 Industrial application of superplastic forming: trends and prospects
J. Mater. Process. Technol. Garat 147 359 2004 10.1016/j.jmatprotec.2003.01.002 Influence of design and process parameters on service life of nut hot forging dies
P. Lours, S. Baleix, G. Bernhart, in: T. Chandra, K. Higashi, C. Suryanarayana, C. Tome (Eds.), Investigation on the Damage of Superplastic Forming Tools, Elsevier Science, UK, 2001, J. Mater. Process. Technol. (CDROM Special Issue).
Baleix 1999 Proceedings of the Third International Congress on Thermal Stresses Simulation of service life cycle induced thermomechanical stresses in a superplastic forming tool
Mater. Sci. Eng. A Baleix 327 2 155 2002 10.1016/S0921-5093(01)01529-5 Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies
J. Mater. Process. Technol. Baleix 118 1-3 321 2001 10.1016/S0924-0136(01)00860-3 Surface and image analysis of oxides grown and spalled on heat resistant cast steels exposed to thermal cycles
Int. J. Mater. Prod. Technol., SPM1 Lours vol. 2 445 2001 Performance of metallic and ceramic tools for superplastic forming
D. Recorbet, Creep Properties of Refractory Steels, Report S-97/4283000F2, DGA-CEAT, 2001.
P. Lours, S. Baleix, G. Bernhart, First Annual Research Report on SPF dies, Report SPF/RAI/06/98, ENSTIMAC, 1998.
J. Mater. Process. Technol. Kim 62 90 1996 10.1016/0924-0136(95)02223-6 Analysis of superplastic forming processes using a finite-element method
J. Mater. Process. Technol. Chenot 125-126 45 2002 10.1016/S0924-0136(02)00416-8 Numerical treatment of contact and friction in FE simulation of forming processes
S. Baleix, P. Lours, G. Bernhart, High Temperature Mechanical Behavior of Ni-Cr-Fe Heat Resistant Cast Steel, ICM8, Victoria, Canada, May 16-21, 1999.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 공개 리포지터리에 출판본, post-print, 또는 pre-print를 셀프 아카이빙 하여 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.