[논문]Micromechanical theoretical and computational modeling of energy dissipation due to nonlinear vibration of hard ceramic coatings with microstructural recursive faults

Abu Al-Rub, R.K.; Palazotto, A.N.

doi:10.1016/j.ijsolstr.2010.04.016

Micromechanical theoretical and computational modeling of energy dissipation due to nonlinear vibration of hard ceramic coatings with microstructural recursive faults 원문보기

International journal of solids and structures, v.47 no.16, 2010년, pp.2131 - 2142

Abu Al-Rub, R.K. , Palazotto, A.N.

Abstract ▼ AI-Helper

Engine failures due to high-cycle fatigue during severe dynamic vibration have cost the US Air Force an estimated $400 million dollars per year over the past two decades. Therefore, structural materials that exhibit high damping capacities are desirable for mechanical vibration suppression and acoustic noise attenuation. Few experimental studies suggested that hard ceramic coatings, which are commonly used as thermal barrier coatings (TBCs) to protect engine components from high temperatures and corrosion, can also serve as passive dampers due to their unique microstructure which consists of several layers of splats with inter- and intra-microstructural recursive faults (micro-cracks). Therefore, the focus of this study is on the development of a fundamental understanding of the unique microstructural features and mechanisms responsible for this observed energy dissipation in ceramic coatings under nonlinear vibration through the development of a micromechanical computational framework. Inter- and intra-fatigue damage and internal friction is simulated through the development of thermodynamic-based nonlinear cohesive laws that consider interfacial degradation, debonding, plastic sliding, and Coulomb/contact friction between the interfaces of microstructural faults. Representative volume element-based micromechanical simulations are conducted in order to assess the main micromechanical mechanisms responsible for the experimentally observed nonlinear (amplitude- and frequency-dependent) damping in plasma sprayed hard ceramic coatings. It is concluded that the major part of energy dissipation is achieved through contact friction which results from sliding of the splat interfaces along the microstructural recursive faults. Energy dissipation due to progressive decohesion and evolution of new micro-cracks is not that significant as compared to energy dissipated due to increased friction from existing and new created faults. Therefore, internal friction is the main mechanism that makes TBCs effective dampers.

주제어

참고문헌 (32)

ABAQUS, 2004. User Manual, Version 6.5, Habbitt, Karlsson and Sorensen, Inc., Providence, RI.
Int. J. Solids Struct. Abu Al-Rub 40 2611 2003 10.1016/S0020-7683(03)00109-4 On the coupling of anisotropic damage and plasticity models for ductile materials

상세보기
Appl. Math. Mech. Barenblatt 23 622 1959 10.1016/0021-8928(59)90157-1 The formation of equilibrium cracks during brittle fracture: general ideas and hypotheses, axially symmetric cracks

상세보기
Shock Vib. Blackwell 14 37 2007 10.1155/2007/260183 The evaluation of the damping characteristics of a hard coating on titanium

상세보기
Int. J. Solids Struct. Camacho 33 2899 1996 10.1016/0020-7683(95)00255-3 Computational modeling of impact damage in brittle materials

상세보기
Compr. Struct. Integrity Chaboche 2 213 2003 10.1016/B0-08-043749-4/02085-1 Damage mechanics
Int. J. Solids Struct. Chaboche 38 3127 2001 10.1016/S0020-7683(00)00053-6 Interface debonding models: a viscous regularization with a limited rate dependency

상세보기
J. Chem. Phys. Coleman 47 2 597 1967 10.1063/1.1711937 Thermodynamics with internal state variables

상세보기
J. Aircraft Cross 10 10 689 1973 10.2514/3.60284 Potential of graded coatings on vibration damping

상세보기
J. Mech. Phys. Solids Dugdale 8 100 1960 10.1016/0022-5096(60)90013-2 Yielding of steel sheets containing slits

상세보기
Acta Mater. Hutchinson 48 125 2000 10.1016/S1359-6454(99)00291-8 Mechanics of materials: top-down approaches to fracture

상세보기
10.2514/6.2003-1689 Ivancic, F.T., 2003. The Effect of a Hard Coating on the Damping and Fatigue Life of Titanium. M.Sc. Thesis, Air Force Institute of Technology, Dayton, OH.
J. Aerospace Eng. Ivancic 18 8 2005 10.1061/(ASCE)0893-1321(2005)18:1(8) Experimental considerations for determining the damping coefficients of hard coatings

상세보기
J. Appl. Mech. Iwan 33 893 1966 10.1115/1.3625199 A distributed-element model for hysteresis and its steady-state dynamic response

상세보기
Izv. Akad. Nauk USSR Otd. Tech. Kachonov 8 26 1958 On the creep fracture time
Appl. Mech. Rev. Krajcinovic 37 1 1983 Continuum damage mechanics
Lakes 1998 Viscoelastic Solids
NDT & E Int. Lauwagie 41 88 2008 10.1016/j.ndteint.2007.08.007 Resonant-based identification of the elastic properties of layered materials: application to air-plasma sprayed thermal barrier coatings

상세보기
Lemaitre 1992 A Short Course in Damage Mechanics
Lemaitre 1990 Mechanics of Solid Materials
Int. J. Fract. Needleman 40 21 1990 10.1007/BF00018611 An analysis of decohesion along an imperfect interface

상세보기
ASCE J. Aerospace Eng. Patel 17 45 2004 10.1061/(ASCE)0893-1321(2004)17:2(45) Finite element method based model to study high cycle fatigue in turbine blades

상세보기
Mater. Sci. Eng. A Patsias 370 412 2004 10.1016/j.msea.2003.07.020 Hard damping coatings: an experimental procedure for extraction of damping characteristics and modulus of elasticity

상세보기
Pawlowski 1995 The Science and Engineering of Thermal Spray Coatings
Pearson, L.E., 2008. Vibration Analysis of Commercial Thermal Barrier Coatings. M.Sc. Thesis, Air Force Institute of Technology, Dayton, OH.
Reed, S.A., 2007. Development of Experimental, Analytical, and Numerical Approximations Appropriate for Nonlinear Damping Coatings. Ph.D. Dissertation, Air Force Institute of Technology, Dayton, OH.
Shock Vib. Reed 14 1 2007 An experimental technique for the evaluation of strain dependent material properties of hard coatings
Shipton, M., Patsias, S., 2003. Hard damping coatings: internal friction as the damping mechanism. In: Proceedings of the Eighth National Turbine Engine High Cycle Fatigue (HCF) Conference, Monterey, California, USA.
Mater. Sci. Eng. A Tassini 442 509 2006 10.1016/j.msea.2006.04.140 Ceramic coatings: a phenomenological modeling for damping behavior related to microstructural features

상세보기
J. Eur. Ceram. Soc. Tassini 27 1487 2007 10.1016/j.jeurceramsoc.2006.05.041 Study of the amplitude-dependent mechanical behavior of yttria-stabilised zirconia thermal barrier coatings

상세보기
Int. J. Solids Struct. Torvik 46 1066 2009 10.1016/j.ijsolstr.2008.10.025 Determination of mechanical properties of non-linear coatings from measurements with coated beams

상세보기
J. Mech. Phys. Solids Xu 42 1397 1994 10.1016/0022-5096(94)90003-5 Numerical simulations of fast crack growth in brittle solids

상세보기

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Micromechanical theoretical and computational modeling of energy dissipation due to nonlinear vibration of hard ceramic coatings with microstructural recursive faults 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (32)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트