최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Tribology online, v.6 no.4, 2011년, pp.219 - 225
Yokouchi, Atsushi (Research and Development Center, NSK Corporation) , Hokao, Michita (Research and Development Center, NSK Corporation) , Sugimura, Joichi (Department of Mechanical Engineering, Kyushu University)
This paper describes the influence of fiber length of lithium-soap thickener of greases on friction under boundary lubrication conditions. Ball-on-disk sliding tests were conducted with lithium soap greases with polyol ester as the base oil. The tests revealed that the greases had a lower friction c...
[1] Boner, C. J., “Manufacture and Application of Lubricating Grease,” Reinhold Publishing Corporation, New York, 1954, 904-913.
[2] Neale, M. J., eds., “The Tribology Handbook, Second Edition,” Butterworth-Heinemann, Oxford, 1995, C4.1-C4.4.
[4] Ward, W. C., Denis, R. A., Najman, M. and Groote C. L., “EP Additive Response and Tribochemical Film Formation in Lithium and Lithium Complex Grease,” NLGI Spokesman, 71, 7, 2007, 14-21.
[5] Kita, T. and Yamamoto, Y., “Structure Changes in Manufacturing Process of Lithium 12-Hydroxystearate Grease,” J. Japan Soc. Tribologists, 38, 1, 1993, 69-76.(in Japanese)
[6] Kita, T. and Yamamoto, Y., “The Relations between Fibrous Structures and Manufacturing Conditions at Lithium 12-Hydroxystearate Lubricating Grease,” J. Japan Soc. Tribologists, 40, 2, 1995, 161-168.(in Japanese)
[7] Yamamoto, Y., Gondo, S. and Kita, T., “Effect of Soap Fiber Structure of Lithium 12-Hyudroxystearate Grease on Frictional Characteristics under Boundary Lubricating Condition,” J. Japan Soc. Tribologists, 42, 6, 1997, 462-469.(in Japanese)
10.1080/10402000108982474 [8] Kimura, H., Imai, Y. and Yamamoto, Y., “Study on Fiber Length Control for Ester-Based Lithium Soap Grease,” Trib. Trans., 44, 3, 2001, 405-410.
[9] Cann, P. M., “Grease Lubricant Film Distribution in Rolling Contacts,” NLGI Spokesman, 61, 2, 1997, 22-29.
[10] Cann, P. M. and Lubrecht, T., “Mechanisms of Grease Lubrication in Rolling Element Bearings,” COST 516 Tribology Symp., 1998, 61-75.
[11] Hurley, S. and Cann, P. M., “Starved Lubrication of EHL Contacts - Relationship to Bulk Grease Properties,” NLGI Spokesman, 64, 2, 2000, 15-23.
[12] Hurley, S. and Cann, P. M., “Infrared Spectroscopic Characterization of Grease Lubricant Films on Metal Surfaces,” NLGI Spokesman, 64, 7, 2000, 13-21.
10.1243/1350650001543205 [13] Eriksson, E., Wikström, V. and Larsson, R., “Grease Soap Particles Passing through an Elastohydrodynamic Contact under Side Slip Conditions,” Proc. Instn. Mech. Engrs., Part J, 214, 2000, 317-325.
[14] Cann, P. M. and Hurley, S., “Friction Properties of Grease in Elastohydrodynamic Lubrication,” NLGI, 66, 1, 2002, 6-15.
10.1002/ls.39 [15] Cann, P. M., “Grease Lubrication of Rolling Element Bearings - Role of the Grease Thickener,” Lubrication Science, 19, 2007, 183-196.
10.1243/PIME_PROC_1995_209_406_02 [16] Williamson, B. P., “An Optical Study of Grease Rheology in an Elastohydrodynamic Point Contact under Fully Flooded and Starvation Conditions,” Proc. Instn. Mech. Engrs., 209, 1994, 63-74.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.