참고문헌 (26)

1. Abaqus™ (2007). User’s Manual-Vers.6.7. Hibbitt. Karlsson & Sorensen. Pawtucket. RI, USA. 

2. Exp. Tech. M. E. Barkey 23 5 20 1999 10.1111/j.1747-1567.1999.tb01300.x Barkey, M. E. and Kang, H. (1999). Testing of spot welded coupons in combined tension and shear. Exp. Tech. 23,5, 20-22. 

   상세보기

3. ASME J. Eng. Mater. Technol. Y. Chao 125 125 2003 10.1115/1.1555648 Chao, Y. (2003). Ultimate strength and failure mechanism of resistant spot weld subjected to tensile, shear, or combined tensile/shear loads. ASME J. Eng. Mater. Technol., 125, 125-132. 

   상세보기

4. Int. J. Impact Eng. A. Combescure 28 783 2003 10.1016/S0734-743X(02)00158-6 Combescure, A., Delcroix, F., Caplain, L., Espanol, S. and Eliot, P. (2003). A finite element to simulate the failure of weld point on impact. Int. J. Impact Eng., 28, 783-802. 

   상세보기

5. Int. J. Mod. Phys. J. W. Ha B22 31/32 5800 2008 10.1142/S0217979208051194 Ha, J. W., Song, J. H., Huh, H., Lim, J. H. and Park, S. H. (2008). Dynamic material properties of the heat-affected zone (HAZ) in resistance spot welding. Int. J. Mod. Phys. B 22,31/32, 5800-5806. 

   상세보기

6. Int. J. Automotive Technology H. Huh 10 2 195 2009 10.1007/s12239-009-0023-3 Huh, H., Lim, J. H. and Park, S. H. (2009). High speed tensile test of steel sheets for the stress-strain curve at the intermediate strain rate. Int. J. Automotive Technology 10,2, 195-204. 

   원문보기 상세보기

7. Inoue, T. and Nakanishi, E. (2000). A crash simulation analysis which consider the SPOTWELD rupture. JSAE Paper No. 88-00, 5-7. 

8. JIS (1999a). Specimen Dimensions and Procedure for Shear Testing Resistance Spot and Embossed Projection Welded Joints. JIS Z 3136. 

9. JIS (1999b). Specimen Dimensions and Procedure for Cross Tension Testing Resistance Spot and Embossed Projection Welded Joints. JIS Z 3137. 

10. Int. J. Solids Struct. B. Langrand 41 6631 2004 10.1016/j.ijsolstr.2004.06.009 Langrand, B. and Combescure, A. (2004). Non-linear and failure behavior of spotwelds: A “global” finite element and experiments in pure and mixed modes I/II. Int. J. Solids Struct., 41, 6631-6646. 

    상세보기

11. Int. J. Impact Eng. B. Langrand 37 729 2010 10.1016/j.ijimpeng.2010.01.004 Langrand, B. and Markiewicz, E. (2010). Strain-rate dependence in spot welds: Non-linear behaviour and failure in pure and combined modes I/II. Int. J. Impact Eng., 37, 729-805. 

    상세보기

12. J. Test. Eval. Y. L. Lee 26 3 213 1998 10.1520/JTE11994J Lee, Y. L., Wehner, T. J., Lu, M. W., Morrissett, T. W. and Pakalnins, E. (1998). Ultimate strength of resistance spot welds subjected to combined tension and shear. J. Test. Eval., 26,3, 213-219. 

    상세보기

13. Int. J. Solids Struct. S.-H. Lin 39 19 2002 10.1016/S0020-7683(01)00187-1 Lin, S.-H., Pan, J., Wu, S.-R., Tyan, T. and Wung, P. (2002). Failure loads of spot welds under combined opening and shear static loading conditions. Int. J. Solids Struct., 39, 19-39. 

    상세보기

14. 10.4271/2003-01-0608 Madasamy, C., Tyan, T., Faruque, O. and Wung, P. (2003). Methodology for testing of spot-welded steel connections under static and impact loadings. SAE Paper No. 2003-01-0608. 

    

15. Malcolm, S. and Nutwell, E. (2007). Spotweld failure prediction using solid element assemblies. Proc. 6th European. LS-Dyna Users’ Conf., Gothenburg, Sweden, 2.47-2.55. 

16. 10.4271/982356 Sato, K., Yoshitake, A., Hosoya, Y. and Mikami, H. (1998). FEM simulation to estimate crashworthiness of automotive. SAE Paper No. 982356. 

    

17. Int. J. Mech. Sci. J. H. Song 53 513 2011 10.1016/j.ijmecsci.2011.04.008 Song, J. H. and Huh, H. (2011). Failure characterization of a spot weld under combined axial-shear loading conditions. Int. J. Mech. Sci., 53, 513-525. 

    상세보기

18. Int. J. Automotive Technoloy J. H. Song 7 3 329 2006 Song, J. H., Huh, H., Kim, H. G. and Park, S. H. (2006). Evaluation of the finite element modeling of a spot welded region for crash analysis. Int. J. Automotive Technoloy 7,3, 329-336. 

19. Int. J. Mod. Phys. J. H. Song B22 9/10 1469 2008 10.1142/S0217979208046943 Song, J. H., Huh, H., Lim, J. H. and Park, S. H. (2008). Effect of tensile speed on the failure load of a spot weld under combined loading conditions. Int. J. Mod. Phys. B, 22, 9/10, 1469-1474. 

    상세보기

20. 10.4271/2000-01-1545 van Schaik, M. and Martin, D. (2000). ULSAB advanced vehicle concepts - The latest steel demonstration for automotive. SAE Paper No. 2000-01-1545. 

    

21. Wood, P. K. C., Buckley, M. A., Walker, B. and Dutton, T. (2010). A new strain rate dependent spot weld model for automotive crash applications. Proc. 11th Int. LS-DYNA Users Conf., Detroit, USA, 12-1-12-14. 

22. Exp. Mech. P. Wung 41 1 10 2001 Wung, P. (2001), A force-based failure criterion for spot weld design. Exp. Mech. 41,1, 10-113. 

23. Exp. Mech. P. Wung 41 1 100 2001 10.1007/BF02323111 Wung, P., Walsh, T., Ourchane, A., Stewart, W. and Jie, M. (2001). Failure of spot welds under in-plane static loading. Exp. Mech. 41,1, 100-106. 

    상세보기

24. Finite Elem. Anal. Des. S. Xu 40 1175 2003 10.1016/j.finel.2003.08.006 Xu, S. and Deng, X. (2003). An evaluation of simplified finite element models for spot welded joints. Finite Elem. Anal. Des., 40, 1175-1194. 

    상세보기

25. Zhang, H. and Senkara, J. (2006). Resistance Welding-Fundamentals and Application. Florida. CRC Press. 

26. 10.1520/STP16249S Zuniga, S. and Sheppard, S. D. (1997). Resistance spot weld failure loads and modes in overload conditions. Piascik, R. S., Newman, J. C., Dowling, N. E. (edn). Fatigue and Fracture Mechanics, 27, ASTM STP 1296, 469-489.