참고문헌 (16)

1. ACI Committee 318-11. Building Code Requirements for Reinforced Concrete and Commentary (ACT 318-11/ACI 318R-1), American Concrete Institute, Detroit (2011). 

2. Comittee European de Normalisation (CEN). Eurocode 2: Design of Concrete Structures. Part 1 - General Rules and Rules for Buildings, prEN 1992-1 (2002). 

3. CSA Committee A23.3-04. Design of Concrete Structures for Buildings, CAV3-A23.3-04, Canadian Standards Association, Canada (2004). 

4. Int. J. Concr. Struct. Mater. TJ Looney 6 3 187 2012 10.1007/s40069-012-0017-9 T. J. Looney, M. Arezoumandi, J. Volz, and J. J. Myers, “An experimental study on bond strength of reinforcing steel in self-consolidating concrete,” Int. J. Concr. Struct. Mater., 6, No. 3, 187-197 (2012). 

   원문보기 상세보기

5. KSCE J. Civil Eng. R Hameed 17 7 1700 2013 10.1007/s12205-013-1240-x R. Hameed, A. Turatsinze, F. Duprat, and A. Sellier, “Bond stress-slip behaviour of steel reinforcing bar embedded in hybrid fiber reinforced concrete,” KSCE J. Civil Eng., 17, No. 7, 1700-1707 (2013). 

   상세보기

6. ASCE J. Struct. Eng. BH Oh 133 216 2007 10.1061/(ASCE)0733-9445(2007)133:2(216) B. H. Oh and S. H. Kim, “Realistic models for local bond stress-slip of reinforced concrete under repeated loading,” ASCE J. Struct. Eng., 133, 216-224 (2007). 

   상세보기

7. J. Compos. Constr. E Cosenza 1 40 1997 10.1061/(ASCE)1090-0268(1997)1:2(40) E. Cosenza, G. Manfredi, and R. Realfonzo, “Behavior and modeling of bond of FRP rebars to concrete,” J. Compos. Constr., 1, 40-51 (1997). 

   상세보기

8. Z. Achillides, Bond Behavior of FRP Bars in Concrete, Thesis, Centre for Cement and Concrete, Dept. of Civil and Structural Engineering, The University of Sheffield (1998). 

9. Trans. Japan Concr. Inst. H Shima 15 297 1993 H. Shima, T. Suga, and M. Honma, “Local bond stress-slip relationship of continuous fibre reinforcing materials obtained by pull bond test with long embedment,” Trans. Japan Concr. Inst., 15, 297-304 (1993). 

10. J. Compos. Constr. R Okelo 9 3 203 2005 10.1061/(ASCE)1090-0268(2005)9:3(203) R. Okelo and R. L.Yuan, “Bond strength of fiber reinforced polymer rebars in normal strength concrete,” J. Compos. Constr., 9, No. 3, 203-213 (2005). 

    상세보기

11. Composites Part B: Engineering JY Lee 39 258 2008 10.1016/j.compositesb.2007.03.008 J. Y. Lee, T. Y. Kim, T. J. Kim, et al., “Interfacial bond strength of glass fiber reinforced polymer bars in high-strength concrete,” Composites Part B: Engineering, 39, 258-270 (2008). 

    상세보기

12. ASTM Standard Test Method, Comparing Concrete on the Basis of the Bond Developed with Reinforcing Steel, C 234 (1991). 

13. CSA. Design and Construction of Building Components with Fibre-Reinforced Polymers, S806-02, CSA (2002). 

14. ASTM Standard Specification for Moist Cabinets. Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes, C 511-92 (1992). 

15. M. Chang, Research on the Bond Behavior of Fiber Reinforced Polymer Rebars Subjected to Cyclic Loading, M.S. Thesis, Sungkyunkwan University, Suwon (2006). 

16. R Eligehausen 1983 Load Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations R. Eligehausen, E. P. Popov, and V. V. Bertero, Load Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations, Report No. UCB/EERC82-83, Earthquake Engineering Research Center, University of California, Berkeley, CA (1983).