최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Polymer testing, v.40, 2014년, pp.299 - 303
Kratochvilla, T.R. , Frank, A. , Pinter, G.
In this work, a short time test method to determine the slow crack growth behaviour of samples made out of pipes was evaluated. The cracked round bar (CRB) method used provides results below 48 h with brittle fracture surfaces, which indicates the type of slow crack growth failure. To evaluate the u...
Kunststoffe Richard 49 10 516 1959 Trinkwasserrohre aus Niederdruckpolyathylen
3R International Hessel 45 3/4 128 2006 50 Years of polyethylene piping. Engineering perspective
ISO 9080 2012 Plastics Piping and Ducting Systems - Determination of the Long-term Hydrostatic Strength of Thermoplastics Materials in Pipe Form by Extrapolation
OVGW/GRIS PW 405/1 2012 Polyethylene PE 100-RC Pipe Systems for Alternative Installation Techniques for the Supply of Drinking Water
OVGW QS-G 392/2 2013 Polyethylene Piping Systems PE 80, PE 100 and PE 100-RC for the Supply of Gaseous Fuels, Part 2: Pipes
PAS 1075 2009 Rohre aus Polyethylen fur alternative Verlegetechniken
Polymer Kurelec 46 6369 2005 10.1016/j.polymer.2005.05.061 Strain hardening modulus as a measure of environment stress crack resistance of high density polyethylene
J. Mater. Sci. Peres 43 1844 2008 10.1007/s10853-007-2427-7 Application of the essential work of fracture method in ranking the performance in service of high-density polyethylene resins employed in pressure pipes
McCarthey XIV 10 2008
Kuhlman 1992 Proceedings Plastics Pipes VIII, Konigshof, Netherlands Forecasting the long-term service performance of polyethylene gas distribution pipes
Beech 2001 Proceedings Plastic Pipes XI, Munchen, Germany Mechanisms of slow crack growth in PE pipe grades
Allwood 1992 Proc. of the 13th Int. Plastic Fuel Gas Pipe Symposium, San Antonia, Texas
Beech 2004 Proceeding of Plastics Pipe XII, Baveno Interpretation of the results of the full notch creep test and a comparison with the notched pipe test
ISO 13479 2009 Polyolefin Pipes for the Conveyance of Fluids - Determination of Resistance to Crack Propagation - Test Method for Slow Crack Growth on Notched Pipes
Kunststoffe Fleissner 77 45 1987 Langsames Risswachstum und Zeitstandfestigkeit von Rohren aus Polyethylen
Polym. Eng. Sci. Fleissner 38 330 1998 10.1002/pen.10194 Experience with a full notch creep test in determining the stress crack performance of polyethylene
ISO 16770 2004 Plastics - Determination of Environmental Stress Cracking (ESC) of Polyethylene - Full-notch Creep Test (FNCT)
Plast. Rub. Compos. Pro. Beech 27 418 1998 Slow crack growth performance of today's plastics pipeline materials
ASTM F1473-11. Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins.
ISO 16241 2005 Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Materials for Pipe and Fitting Products (PENT)
J. Appl. Mech. Irwin 24 361 1957 10.1115/1.4011547 Analysis of stresses and strains near the end of a crack traversing a plate
Hertzberg 1980 Fatigue of Engineering Plastics
Kinloch 1983 Fracture Behaviour of Polymers
Lang 1984 Applicability of Linear Elastic Fracture Mechanics to Fatigue in Polymers and Short-fiber Composites
Broek 1986 Elementary Engineering Fracture Mechanics
Williams 1987 Fracture Mechanics of Polymers
Hertzberg 1989 Deformation and Fracture Mechanics of Engineering Materials
J. Mater. Sci. Parsons 34 3315 1999 10.1023/A:1004616728535 Correlation of Stepwise fatigue and creep slow crack growth in high density polyethylene
Anderson 2005 Fracture Mechanics - Fundamentals and Application
ONR 25194 2011 Determination of the Resistance to Slow Crack Growth of Polyethylene with Cracked Round Bar (CRB) Specimens
Polym. Test. Pinter 26 2 180 2007 10.1016/j.polymertesting.2006.09.010 Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test
Polym. Test. Frank 28 737 2009 10.1016/j.polymertesting.2009.06.004 Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use
Eng. Fract. Mech. Frank 76 2780 2009 10.1016/j.engfracmech.2009.06.009 A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades
Macromol. Symp. Frank 311 1 103 2012 10.1002/masy.201000097 Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis
Polym. Test. Frank 33 161 2014 10.1016/j.polymertesting.2013.11.013 Evaluation of the applicability of the cracked round bar test as standardized PE-pipe ranking tool
Polym. Test. Pinter 26 180 2007 10.1016/j.polymertesting.2006.09.010 Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades
Frank 2214 2011 Proceedings Annual Technical Conference - ANTEC Characterization of crack initiation and slow crack growth in polyethylene with cyclic cracked round bar tests
Frank 2014 Proceedings Pipes XVII, Chicago, Illinois, USA Characterization of crack initiation and slow crack growth resistance of PE 100 and PE 100 RC pipe grades with cyclic cracked round bar (CRB) tests
Frank 2169 2009 Proceedings Annual Technical Conference - ANTEC Lifetime prediction of polyethylene pipes based on an accelerated extrapolation concept for creep crack growth with fatigue tests on cracked round bar specimens
Frank 1638 2010 Proceedings Annual Technical Conference - ANTEC Validation of an accelerated fracture mechanics extrapolation tool for lifetime prediction of PE pressure pipes
Macromol. Symp. Frank 311 1 112 2012 10.1002/masy.201000096 Numerical assessment of PE 80 and PE 100 pipe lifetime based on Paris-Erdogan equation
Huta 108 98 2013 The effect of residual stress on polymer pipe lifetime
Polym. Test. Arbeiter 37 186 2014 10.1016/j.polymertesting.2014.05.016 Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer
Kratochvilla 2006 Proceedings of Plastics Pipes XIII, Washington DC Morphological and Structural effects on slow crack growth in PE-pipes
Kratochvilla 2008 Proceedings of Plastics Pipes XIV, Budapest Morphological considerations on slow crack growth in polyethylene pipes under different production conditions
Kunststoffe Kratochvilla 6 53 2005 Notch location plays a role
Polym. Test. Kratochvilla 27 158 2008 10.1016/j.polymertesting.2007.09.006 Experiences with modified test conditions for notch pipe testing
ISO 179-1 (2000-12-15) 1 2005
ISO 179-2 (1997-12-15) 1 2007
Dowling 2007 Mechanical Behaviour of Materials
Seidler 1998 Deformations und Bruchverhalten von Kunststoffen
Beerbaum 1999 Ermittlung strukturbezogener bruchmechanischer Werkstoffkenngroßen an Polyethylen-Werkstoffen, Dissertation
Pinter 3551 2005 Proceedings of ANTEC Ranking of PE pipe grades by their failure behaviour under impact loads
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.