다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
International communications in heat and mass transfer, v.74, 2016년, pp.40 - 47
Al-Asadi, M.T. , Alkasmoul, F.S. , Wilson, M.C.T.
AI-Helper
Three-dimensional conjugate heat transfer under laminar flow conditions within a micro-channel is analysed numerically to explore the impact of a new design of vortex generator positioned at intervals along the base of the channel. The vortex generators are cylindrical with quarter-circle and half-c...
Int. J. Heat Mass Transf. Li 67 666 2013 10.1016/j.ijheatmasstransfer.2013.08.042 Enhancing heat transfer in a plate-fin heat sink using delta winglet vortex generators
Case Stud. Therm. Eng. Albadr 1 1 38 2013 10.1016/j.csite.2013.08.004 Heat transfer through heat exchanger using Al2O3 nanofluid at different concentrations
C.R. Mec. Cheraghi 342 2 63 2014 10.1016/j.crme.2013.12.004 Effect of cylinder proximity to the wall on channel flow heat transfer enhancement
Renew. Sust. Energ. Rev. Dixit 41 1298 2015 10.1016/j.rser.2014.09.024 Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids
Appl. Mech. Rev. Mehendale 53 7 175 2000 10.1115/1.3097347 Fluid flow and heat transfer at micro- and meso-scales with application to heat exchanger design
Kandlikar 2002 Proceedings of the ASME International Mechanical Engineering Congress Exposition Evolution of microchannel flow passages: thermohydraulic performance and fabrication technology
IEEE Electron Device Lett. Tuckerman 2 5 126 1981 10.1109/EDL.1981.25367 High-performance heat sinking for VLSI
Appl. Therm. Eng. Manca 37 280 2012 10.1016/j.applthermaleng.2011.11.030 A numerical study of nanofluid forced convection in ribbed channels
Case Stud. Therm. Eng. Ahmed 4 65 2014 10.1016/j.csite.2014.07.001 Effect of corrugation profile on the thermal-hydraulic performance of corrugated channels using CuO-water nanofluid
Int. J. Heat Mass Transf. Wang 55 11-12 3054 2012 10.1016/j.ijheatmasstransfer.2012.02.025 Air-side performance of herringbone wavy fin-and-tube heat exchangers under dehumidifying condition - Data with larger diameter tube
Int. J. Therm. Sci. Li 92 85 2015 10.1016/j.ijthermalsci.2015.01.030 Numerical simulation on flow and heat transfer of fin-and-tube heat exchanger with vortex generators
J. Heat Transf. Johnson 91 1 91 1969 10.1115/1.3580126 The influence of vortex generators on the drag and heat transfer from a circular cylinder normal to an airstream
Appl. Therm. Eng. Ebrahimi 78 576 2015 10.1016/j.applthermaleng.2014.12.006 Numerical study of liquid flow and heat transfer in rectangular microchannel with vortex generators
Renew. Sust. Energ. Rev. Ahmed 16 8 5951 2012 10.1016/j.rser.2012.06.003 An overview on heat transfer augmentation using vortex generators and nanofluids: approaches and applications
Int. J. Heat Mass Transf. Min 53 15-16 3023 2010 10.1016/j.ijheatmasstransfer.2010.03.026 Experimental study of rectangular channel with modified rectangular vortex generators
Appl. Therm. Eng. Habchi 38 14 2012 10.1016/j.applthermaleng.2012.01.020 Enhancing heat transfer in vortex generator-type multifunctional heat exchangers
Appl. Therm. Eng. Al-Damook 89 365 2015 10.1016/j.applthermaleng.2015.06.036 An experimental and computational investigation of thermal air flows through perforated pin heat sinks
IEEE Trans. Compon. Packag. Technol. Kai-Shing 33 2 391 2010 10.1109/TCAPT.2010.2044412 On the heat transfer characteristics of heat sinks: with and without vortex generators
Int. J. Heat Mass Transf. Leu 47 19-20 4327 2004 10.1016/j.ijheatmasstransfer.2004.04.031 Heat transfer and fluid flow analysis in plate-fin and tube heat exchangers with a pair of block shape vortex generators
Appl. Therm. Eng. Wu 37 67 2012 10.1016/j.applthermaleng.2012.01.002 Effect of vortex generator on heat transfer in rectangular channels
Int. J. Therm. Sci. Khoshvaght-Aliabadi 88 180 2015 10.1016/j.ijthermalsci.2014.10.001 Performance of a plate-fin heat exchanger with vortex-generator channels: 3D-CFD simulation and experimental validation
Int. J. Heat Mass Transf. Li 54 9-10 1743 2011 10.1016/j.ijheatmasstransfer.2011.01.017 Numerical study on a slit fin-and-tube heat exchanger with vortex generators
Int. Commun. Heat Mass Transfer Chomdee 33 5 618 2006 10.1016/j.icheatmasstransfer.2006.01.002 Enhancement of air cooling in staggered array of electronic modules by integrating delta winglet vortex generators
Int. J. Heat Mass Transf. Liu 54 13-14 3069 2011 10.1016/j.ijheatmasstransfer.2011.02.030 Experimental investigations on liquid flow and heat transfer in rectangular microchannel with vortex generators
Nucl. Eng. Des. Ma 240 1 92 2010 10.1016/j.nucengdes.2009.10.015 Experimental investigations on single-phase heat transfer enhancement with longitudinal vortices in narrow rectangular channel
Int. J. Heat Mass Transf. Xia 80 439 2015 10.1016/j.ijheatmasstransfer.2014.08.095 Effects of different geometric structures on fluid flow and heat transfer performance in microchannel heat sinks
Int. J. Heat Mass Transf. Chen 69 203 2014 10.1016/j.ijheatmasstransfer.2013.10.018 A study on fluid flow and heat transfer in rectangular microchannels with various vortex generators
J. Enhanc. Heat Transf. Mirzaee 19 3 199 2012 10.1615/JEnhHeatTransf.2012002747 Heat transfer enhancement in microchannels using an elastic vortex generator
Int. J. Therm. Sci. Wang 92 1 2015 10.1016/j.ijthermalsci.2015.01.018 Heat and fluid flow characteristics of a rectangular channel with a small diameter circular cylinder as vortex generator
Int. Commun. Heat Mass Transfer Shkarah 48 108 2013 10.1016/j.icheatmasstransfer.2013.08.006 A 3D numerical study of heat transfer in a single-phase micro-channel heat sink using graphene, aluminum and silicon as substrates
Appl. Therm. Eng. Abdollahi 81 376 2015 10.1016/j.applthermaleng.2015.01.044 Optimization of shape and angle of attack of winglet vortex generator in a rectangular channel for heat transfer enhancement
Appl. Therm. Eng. Yu 25 2-3 173 2005 10.1016/j.applthermaleng.2004.06.016 Development of a plate-pin fin heat sink and its performance comparisons with a plate fin heat sink
IEEE Trans. Device Mater. Reliab. Gurrum 4 4 709 2004 10.1109/TDMR.2004.840160 Thermal issues in next-generation integrated circuits
Appl. Therm. Eng. Yuan 48 81 2012 10.1016/j.applthermaleng.2012.04.029 Numerical simulation of the thermal hydraulic performance of a plate pin fin heat sink
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 공개 리포지터리에 출판본, post-print, 또는 pre-print를 셀프 아카이빙 하여 자유로운 이용이 가능한 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.