최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Procedia CIRP, v.56, 2016년, pp.306 - 310
Yang, J. , Hu, Q. , Ding, H.
Corners among linear segments are normally smoothed in order to improve the CNC machining efficiency. The interpolation of the corner smoothing trajectories is important to guarantee high geometric accuracy and good dynamics performance. This paper proposes a two-stage interpolation algorithm for co...
International Journal of Machine Tools & Manufacture Lei 47 10 1530 2007 10.1016/j.ijmachtools.2006.11.011 Fast real-time NURBS path interpolation for CNC machine tools
Part I: jerk limited trajectory generation and quintic spline interpolation. International Journal of Machine Tools & Manufacture Erkorkmaz 41 9 1323 2001 High speed CNC system design
International Journal of Machine Tools and Manufacture Zhao 65 88 2013 10.1016/j.ijmachtools.2012.10.005 A real-time look-ahead interpolation methodology with curvature-continuous b-spline transition scheme for CNC machining of short line segments
Computer-Aided Design Yeh 34 3 229 2002 10.1016/S0010-4485(01)00082-3 Adaptive-feedrate interpolation for parametric curves with a confined chord error
The International Journal of Advanced Manufacturing Technology Cheng 23 11-12 865 2004 Real-time variable feed rate NURBS curve interpolator for CNC machining
International Journal of Machine Tools and Manufacture Zhao 75 1 2013 10.1016/j.ijmachtools.2013.08.002 A parametric interpolator with minimal feed fluctuation for CNC machine tools using arc-length compensation and feedback correction
The International Journal of Advanced Manufacturing Technology Zhang 62 9-12 1273 2012 10.1007/s00170-011-3847-8 An iterative feedrate optimization method for real-time NURBS interpolator
Journal of Manufacturing Science and Engineering Tsai 125 3 449 2003 10.1115/1.1578670 A real-time predictor-corrector interpolator for CNC machining
International Journal of Machine Tools and Manufacture Tulsyan 96 15 2015 10.1016/j.ijmachtools.2015.04.014 Local toolpath smoothing for five-axis machine tools
International Journal of Machine Tools and Manufacture Heng 50 3 281 2010 10.1016/j.ijmachtools.2009.11.005 Design of a NURBS interpolator with minimal feed fluctuation and continuous feed modulation capability
International Journal of Machine Tools & Manufacture Yuen 71 11 2013 10.1016/j.ijmachtools.2013.04.002 Smooth trajectory generation for five-axis machine tools
Mechatronics Yang 31 78 2015 10.1016/j.mechatronics.2015.03.001 A tool path generation and contour error estimation method for four-axis serial machines
International Journal of Machine Tools and Manufacture Liu 87 1 2014 10.1016/j.ijmachtools.2014.07.002 Development and implementation of a NURBS interpolator with smooth feedrate scheduling for CNC machine tools
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.