최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Applied mathematics and computation, v.301, 2017년, pp.60 - 69
Smith, N.A.S. , Fry, A.T. , Crocker, L.E. , Cernuschi, F. , Lorenzoni, L.
A new high temperature solid particulate erosion test system has been designed at the National Physical Laboratory to improve the quality of high temperature erosion tests. The new test system is designed to carry out experiments at temperatures up to 900oC and particle velocities up to 300 ms-1. Th...
Fry 2014 Proceedings of the 7th International Conference on Advances in Materials Technology for Fossil Power Plants Metrology to enable high temperature erosion testing - a new European initiative
Mater. High Temp. Nicholls 14 289 1997 10.1080/09603409.1997.11689555 Laboratory studies of erosion-corrosion processes under oxidising and oxidising/sulphidising conditions
Swaminathan 2010 Proceedings from the Sixth International Conference High-temperature erosion testing standard and round robin testing, in advances in materials technology for fossil power plants
M.G. Gee, I.M. Hutchings, General Approach and Procedures for Erosive Wear Testing, NPL Measurement Good Practice Guide No. 56, 2002.
Model. Simul. Eng. Kuczmarski 1 2011 10.1155/2011/837921 CFD-guided development of test rigs for studying erosion and large-particle damage of thermal barrier coatings
Wear Dai 262 104 2007 10.1016/j.wear.2006.04.010 Nozzle passage aerodynamic design to reduce solid particle erosion of a supercritical steam turbine control stage
Appl. Therm. Eng. Campos-Amezcua 27 2394 2007 10.1016/j.applthermaleng.2007.03.010 Numerical investigation of the solid particle erosion rate in a steam turbine nozzle
Adv. Mech. Eng. Zhu 2013 Numerical analysis of flow erosion on sand discharge pipe in nitrogen drilling
Powder Technol El-Behery 191 130 2009 10.1016/j.powtec.2008.09.018 CFD prediction of air-solid flow in 180° curved duct
Appl. Therm. Eng. Gandhi 42 90 2012 10.1016/j.applthermaleng.2012.03.015 CFD based prediction of erosion rate in large scale wall-fired boiler
Keating 2000 Proceedings of the NACE Corrosion, Orlando Numerical prediction of erosion-corrosion in bends
Mater. High Temp. Nicholls 15 15 1998 10.1080/09603409.1998.11689572 Erosion of EB-PVD thermal barrier coatings
ASTM Standard G76-95 Standard Test Method for Conductiong Erosion Tests by Solid Particle Impingement Using Gas Jets. American Society for Testing, Materials. Vol 03.02. West Conshohocken, PA, 1995.
Heat Transfer User's Guide, Comsol v4.4, 2013, pp. 326-343.
Wear Stevenson 181-186 56 1995 10.1016/0043-1648(95)90008-X Scaling laws for particle velocity in the gas-blast erosion test
Wear Zhang 263 330 2007 10.1016/j.wear.2006.12.048 Comparison of computed and measured particle velocities and erosion in water and air flows
Wear Shipway 162-164 148 1993 10.1016/0043-1648(93)90496-9 Influence of nozzle roughness on conditions in a gas-blast erosion rig
Wear Papini 255 85 2003 10.1016/S0043-1648(03)00125-X Computer modelling of intereference effects in erosion testing: effect of plume shape
Wear Mansouri 332-333 1090 2015 10.1016/j.wear.2014.11.025 A combined CFD/experimental method for erosion prediction
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.