최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of hydrogen energy, v.42 no.9, 2017년, pp.6220 - 6230
Lee, Kunho (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Yuseong-Gu, Daejeon 305-701, Republic of Korea) , Kang, Juhyun (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Yuseong-Gu, Daejeon 305-701, Republic of Korea) , Jin, Sangbeom (Department of Applied Materials Science and Engineering, Hanbat National University, Daejeon 305-719, Republic of Korea) , Lee, Sanghun (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Yuseong-Gu, Daejeon 305-701, Republic of Korea) , Bae, Joongmyeon (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Yuseong-Gu, Daejeon 305-701, Republic of Korea)
This paper presents a study on a solution coating process for depositing layers on porous surfaces, i.e., metal-supported SOFC electrolyte. PVP and nanoparticles are used to achieve the study objectives. PVP, which possesses a type of coiled long chain structure, can increase the solution viscosity ...
Int J Hydrogen Energy Baek 35 11878 2010 10.1016/j.ijhydene.2010.07.108 Interconnect-integrated solid oxide fuel cell with high temperature sinter-joining process
Int J Hydrogen Energy Roehrens 40 11538 2015 10.1016/j.ijhydene.2015.01.155 Advances beyond traditional SOFC cell designs
Int J Hydrogen Energy Liu 37 4401 2012 10.1016/j.ijhydene.2011.11.115 Development of three-layer intermediate temperature solid oxide fuel cells with direct stainless steel based anodes
Int J Hydrogen Energy Choi 35 4285 2010 10.1016/j.ijhydene.2010.02.062 Long-term performance of anode-supported SOFC integrated with metal interconnect by joining process
Int J Hydrogen Energy Kong 35 4592 2010 10.1016/j.ijhydene.2010.02.106 A cost-effective process for fabrication of metal-supported solid oxide fuel cells
J Power Sour Tucker 195 4570 2010 10.1016/j.jpowsour.2010.02.035 Progress in metal-supported solid oxide fuel cells: a review
ECS Trans Tucker 25 673 2009 10.1149/1.3205581 Progress in metal-supported SOFCs
10.1002/adma.19890010816 Brook R. Sol-gel technology for thin films, fibers, preforms, electronics and specialty shapes. In: Klein LC, editor. Noyes Publications, New Jersey, USA 1988. xxi, 407 pp., Bound, US$72.-1SBN 0-8155-1154-X. Adv Mater 1989;1:309.
Sakka 2005 Handbook of sol-gel science and technology processing characterization and applications
J Am Ceram Soc Jpn Suppl Ishikawa 112 S228 2004 Evolution of stress in alkoxide-derived titania gel films under heat-treatment: effects of polyvinylpyrrolidone and acetic acid in coating solutions
J Solgel Sci Technol Kozuka 19 205 2000 10.1023/A:1008780120351 Crack-free, thick ceramic coating films via non-repetitive dip-coating using polyvinylpyrrolidone as stress-relaxing agent
J Am Ceram Soc Yamano 90 3882 2007 10.1111/j.1551-2916.2007.02068.x Effects of the heat-treatment conditions on the crystallographic orientation of Pb(Zr,Ti)O3 thin films prepared by polyvinylpyrrolidone-assisted sol-gel method
J Am Ceram Soc Kozuka 83 1056 2000 10.1111/j.1151-2916.2000.tb01330.x Single-step dip coating of crack-free BaTiO3 films >1 μm thick: effect of poly(vinylpyrrolidone) on critical thickness
J Am Ceram Soc Kozuka 86 33 2003 10.1111/j.1151-2916.2003.tb03273.x Stabilization of poly(vinylpyrrolidone)-containing alkoxide solutions for thick sol-gel barium titanate films
Solid State Ion Chen 177 351 2006 10.1016/j.ssi.2005.10.010 Processing and characterization of ultra-thin yttria-stabilized zirconia (YSZ) electrolytic films for SOFC
J Electrochem Soc Jasinski 152 A454 2005 10.1149/1.1846711 Electrical properties of YSZ films prepared by net shape technology
MRS Proc Petrovsky 822 2004 10.1557/PROC-822-S8.2 Application of composite technology for SOFCs
J Eur Ceram Soc Oh 32 1733 2012 10.1016/j.jeurceramsoc.2012.01.021 Thin film yttria-stabilized zirconia electrolyte for intermediate-temperature solid oxide fuel cells (IT-SOFCs) by chemical solution deposition
Ceram Int Oh 40 8135 2014 10.1016/j.ceramint.2014.01.008 Fabrication of thin-film gadolinia-doped ceria (GDC) interdiffusion barrier layers for intermediate-temperature solid oxide fuel cells (IT-SOFCs) by chemical solution deposition (CSD)
J Polym Sci Part B Polym Phys Sengwa 43 1134 2005 10.1002/polb.20401 Dynamic structure of poly(vinyl pyrrolidone)/ethyl alcohol mixtures studied by time domain reflectometry
J Inorg Nucl Chem Vratny 17 281 1961 10.1016/0022-1902(61)80152-8 The thermal decomposition of cerium (III) nitrate hydrate
J Am Ceram Soc Liu 81 1824 1998 10.1111/j.1151-2916.1998.tb02553.x Effect of particle additions on drying stresses and the green density of sol-gel-processed three-dimensional ceramic-matrix composites
Fuel Cells Barfod 6 141 2006 10.1002/fuce.200500113 Break down of losses in thin electrolyte SOFCs
ECS Trans Ramos 13 235 2008 10.1149/1.3050396 Performance and electrochemical characterisation of thin electrolyte SOFCs
Int J Hydrogen Energy Sarikaya 37 11370 2012 10.1016/j.ijhydene.2012.05.007 Effect of the anode microstructure on the enhanced performance of solid oxide fuel cells
J Electrochem Soc Leonide 155 B36 2008 10.1149/1.2801372 Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells
Electrochim Acta Chen 53 7825 2008 10.1016/j.electacta.2008.05.063 Performance of an anode-supported SOFC with anode functional layers
J Alloys Compd Chen 454 447 2008 10.1016/j.jallcom.2006.12.130 Characteristics of NiO-YSZ anode based on NiO particles synthesized by the precipitation method
Int J Hydrogen Energy Moon 33 2826 2008 10.1016/j.ijhydene.2008.03.024 Characteristics of SOFC single cells with anode active layer via tape casting and co-firing
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.