참고문헌 (24)

1. ANSYS, Inc. (2010). ANSYS. Fluent 13.0 User’s Guide. 

2. ATZ R. Buchheim 85 419 1983 Buchheim, R., Leie, B. and Luckoff, H. J. (1983). Der Neue Audi 100-Ein Beispiel für Konsequente Aerodynamische Personenwagen-Entwicklung. ATZ, 85, 419-425. 

   상세보기

3. A. Cogotti 1989 A strategy for optimum surveys of passenger-car flow fields Cogotti, A. (1989). A strategy for optimum surveys of passenger-car flow fields. SAE Paper No. 890374. 

4. J. Turbulence Y. Dubief 1 1 2000 10.1088/1468-5248/1/1/011 Dubief, Y. and Delcayre, F. (2000). On coherent-vortex identification in turbulence. J. Turbulence, 1, 1-22. 

   상세보기

5. A. Heft 2012 Introduction of a new realistic generic car model for aerodynamic investigations Heft, A., Indinger, T. and Adams, N. (2012). Introduction of a new realistic generic car model for aerodynamic investigations. SAE Paper No. 2012-01-0168. 

6. X. Hu 239 2011 Proc. Int. Conf. Physics Science and Technology Hu, X., Zhang, R., Ye, J., Yan, X. and Zhao, Z. (2011). Influence of different diffuser angle on Sedan’s aerodynamic characteristics. Proc. Int. Conf. Physics Science and Technology, 239-245. 

7. W. H. Hucho 1998 Aerodynamics of Road Vehicles Hucho, W. H. (1998). Aerodynamics of Road Vehicles. 4th edn. SAE International. Warrendale, Pennsylvania, USA. 

8. A. Huminic 2012 Numerical flow simulation for a generic vehicle body on wheels with variable underbody diffuser Huminic, A. and Huminic, G. (2012). Numerical flow simulation for a generic vehicle body on wheels with variable underbody diffuser. SAE Paper No. 2012-01-0172. 

9. S. Kang 2012 A study of an active rear diffuser device for aerodynamic drag reduction of automobiles Kang, S., Cho, J., Jun, S., Park, H., Song, K., Kim, K. and Lee, D. (2012). A study of an active rear diffuser device for aerodynamic drag reduction of automobiles. SAE Paper No. 2012-01-0173. 

10. T. K. Kim 452 2012 Spring Conf. Proc., Korean Society of Automotive Engineers Kim, T. K., Choi, J. K., Kim, J. H., Cho, J. H., Lee, Y. B., Kim, K. H., Lee, D. H., Kim, J. P. and Lee, J. H. (2012). Numerical simulation of flows and aerodynamic drag with active air flap in 3-dimensional engine room. Spring Conf. Proc., Korean Society of Automotive Engineers, 452-462. 

11. T. K. Kim 1500 2013 Spring Conf. Proc., Korean Society of Automotive Engineers Kim, T. K., Jeong, S. M., Choi, J. K., Kim, K. H., Kim, J. P. and Lee, J. Y. (2013a). Parametric study of aerodynamic drag reduction devices for aerodynamic drag reduction of sedan (1): Undercover and under fin. Spring Conf. Proc., Korean Society of Automotive Engineers, 1500-1508. 

12. T. K. Kim 1509 2013 Spring Conf. Proc., Korean Society of Automotive Engineers Kim, T. K., Jeong, S. M., Choi, J. K., Kim, K. H., Kim, J. P. and Kim, K. Y. (2013b). Parametric study of aerodynamic drag reduction devices for aerodynamic drag reduction of sedan (2): Side air dam. Spring Conf. Proc., Korean Society of Automotive Engineers, 1509-1518. 

13. A. Kumar 2015 Study on effect of ground clearance on performance of aerodynamic drag reduction devices for passenger vehicle using CFD simulations Kumar, A., Singh, A. and Regin, A. F. (2015). Study on effect of ground clearance on performance of aerodynamic drag reduction devices for passenger vehicle using CFD simulations. SAE Paper No. 2015-26-0197. 

14. J. Mechanical Science and Technology M. Kwak 27 12 3733 2013 10.1007/s12206-013-0918-9 Kwak, M., Lee, Y., Kwon, H., Kim, K. and Lee, D. H. (2013). Optimum nose shape of a front-rear symmetric train for the reduction of the total aerodynamic drag. J. Mechanical Science and Technology 27, 12, 3733-3743. 

    상세보기

15. G. M. Good Le 1998 A comparison of on-road aerodynamic drag measurements with wind tunnel data from Pininfarina and MIRA Le Good, G. M., Passmore, M. A. and Cogotti, A. (1998). A comparison of on-road aerodynamic drag measurements with wind tunnel data from Pininfarina and MIRA. SAE Paper No. 980394. 

16. J. Levin 2011 Aerodynamic Analysis of Drag Reduction Devises on the Underbody for SAAB 9-3 by Using CFD Levin, J. and Rigdal, R. (2011). Aerodynamic Analysis of Drag Reduction Devises on the Underbody for SAAB 9-3 by Using CFD. M. S. Thesis. Chalmers University of Technology. Gothenburg, Sweden. 

17. 10.4271/2013-01-0952 Marklund, J., Lofdahl, L., Danielsson, H. and Olsson, G. (2013). Performance of an automotive under-body diffuser applied to a sedan and a wagon vehicle. SAE Paper No. 2013-01-0952. 

    상세보기

18. Mellios, G., Hausberger, S., Keller, M., Samaras, C., Ntziachristos, L., Dilara, P. and Fontaras, G. (2011). Parameterisation of Fuel Consumption and CO2 Emissions of Passenger Cars and Light Commercial Vehicles for Modelling Purposes. Publications Office of the European Union. Luxembourg. 

19. Int. Council on Clean Transportation. Working Paper P. Mock 2014-9 1 2014 Mock, P., Kühlwein, J., Tietge, U., Franco, V., Bandivadekar, A. and German, J. (2014). The WLTP: How a new test procedure for cars will affect fuel consumption values in the EU. Int. Council on Clean Transportation. Working Paper 2014-9, 1-20. 

20. D. Nakamura 2015 Flow field analysis in the development of the 2013 model year accord hybrid Nakamura, D., Onishi, Y. and Takehara, Y. (2015). Flow field analysis in the development of the 2013 model year accord hybrid. SAE Paper No. 2015-01-1534. 

21. J. Computational Fluids Engineering K. T. Oh 12 1 22 2007 Oh, K. T., Kim, J. H., Lee, S. W., Kim, Y. S., Ha, J. W. and Kang, W. K. (2007). Automobile underhood thermal and air flow simulation using CFD. J. Computational Fluids Engineering 12, 1, 22-27. 

22. AIAA Journal S. E. Rogers 28 2 253 1990 10.2514/3.10382 Rogers, S. E. and Kwak, D. (1990). An upwind differencing scheme for the time-accurate incompressible Navier-Stokes equations. AIAA Journal 28, 2, 253-262. 

    상세보기

23. D. Sapnaras 2008 Experimental analysis of the underbody pressure distribution of a series vehicle on the road and in the wind tunnel Sapnaras, D. and Dimitriou, I. (2008). Experimental analysis of the underbody pressure distribution of a series vehicle on the road and in the wind tunnel. SAE Paper No. 2008-01-0802 

24. Proc. Institution of Mechanical Engineers, Part D: J. Automobile Engineering S. N. Singh 219 2 127 2005 Singh, S. N., Rai, L., Puri, P. and Bhatnagar, A. (2005). Effect of moving surface on the aerodynamic drag of road vehicles. Proc. Institution of Mechanical Engineers, Part D: J. Automobile Engineering 219, 2, 127-134.