최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Vacuum, v.149, 2018년, pp.262 - 269
Kim, Young Shin (Industrial Technology Research Institute, Kongju National University) , Jeon, Euy Sik (Department of Mechanical Engineering, Graduate School(Industrial Technology Research Institute), Kongju National University)
Abstract The edges of vacuum glazing panels sealed using a hydrogen-mixed gas torch are of various shapes, which affect the strength of vacuum glass. The characteristic strengths were analyzed according to the edge shapes. Specimens with different edge shapes were manufactured to study the characte...
Sol. Energy Fang 93 564 2006 10.1016/j.solener.2005.04.002 Experimental validation of a numerical model for a heat transfer in vacuum glazing
Sol. Energy Griffiths 64 243 1998 10.1016/S0038-092X(98)00019-X B. Norton fabrication of evacuated glazing at low temperature
Energy Build. Asphaug 116 395 2016 10.1016/j.enbuild.2016.01.015 Accelerated ageing and durability of double-glazed sealed insulating window panes and impact on heating demand in buildings
Vacuum Memon 120 73 2015 10.1016/j.vacuum.2015.06.024 A new low-temperature hermetic composite edge seal for the fabrication of triple vacuum glazing
Microsyst. Technol. Nőtzold 16 1243 2010 10.1007/s00542-010-1037-5 Temperature dependent fracture toughness of glass frit bonding layers
Vacuum Kim 121 113 2015 10.1016/j.vacuum.2015.08.007 Establishment of regression model for estimating shape parameters for vacuum-sealed glass panel using design of experiments
ASTM C 158-02 2012 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture
ASTM C 1161-13, Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature.
Eng. Fract. Mech. Vandebroek 96 480 2012 10.1016/j.engfracmech.2012.08.019 Experimental validation of edge strength model for glass with polished and cut edge finishing
Mol. Cryst. Liq. Cryst. Kim 585 15 2013 10.1080/15421406.2013.852770 Sensitivity analysis of edge sealing process parameters of vacuum glazing panel
Agnetti vol. 26 31 2013 Strength on cut edge and ground edge glass beams with the failure analysis method
JAIK Struct. Construct. Lee 21 12 85 2005 Evaluation of bending strength of glass about strong axis by 4-point bending test
Eng. Mater. Lindqvist 488 331 2012 ge-strengthening of structural glass with protective coatings
Sedlacek 1999 Glas im Konstruktiven Ingenieurbau
1991 The Institute of Structural Engineers, Structural Use of Glass in Buildings
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.